Port details on branch 2022Q2 |
- u-boot-rpi2 Cross-build das u-boot for model rpi2
- 2024.01 sysutils =1 2024.01Version of this port present on the latest quarterly branch.
- Maintainer: uboot@FreeBSD.org
- Port Added: 2015-04-24 19:40:27
- Last Update: 2024-01-12 17:08:45
- Commit Hash: 25cd322
- People watching this port, also watch:: coreutils, zip, smartmontools, ztop, python
- License: GPLv2
- WWW:
- https://wiki.freebsd.org/FreeBSD/arm/Raspberry%20Pi
- Description:
- U-Boot loader for Raspberry Pi 2
To install this bootloader, copy u-boot.bin in the share/u-boot/u-boot-rpi
directory to the first partition, formatted as FAT16 or FAT32, on an SD card.
You will also need the firmware files from the rpi-firmware package.
This version is patched so that:
* ELF and API features are enabled.
* The distroboot command knows how to load FreeBSD loader(8)
* By default, it loads ubldr.bin (PIE) from file ubldr.bin on the FAT
partition to address ${kernel_addr_r}, and launches it. If ubldr.bin is
not found, it falls back on ubldr
For information about running FreeBSD on RaspberryPi, see
For general information about U-Boot see WWW: https://www.denx.de/wiki/U-Boot
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- u-boot-rpi2>0:sysutils/u-boot-rpi2
- To install the port:
- cd /usr/ports/sysutils/u-boot-rpi2/ && make install clean
- To add the package, run one of these commands:
- pkg install sysutils/u-boot-rpi2
- pkg install u-boot-rpi2
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: u-boot-rpi2
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1704888643
SHA256 (u-boot/u-boot-2024.01.tar.bz2) = b99611f1ed237bf3541bdc8434b68c96a6e05967061f992443cb30aabebef5b3
SIZE (u-boot/u-boot-2024.01.tar.bz2) = 19926911
Packages (timestamps in pop-ups are UTC):
- Master port: sysutils/u-boot-master
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- gsed : textproc/gsed
- swig : devel/swig
- dtc>=1.4.1 : sysutils/dtc
- mkimage : sysutils/u-boot-tools
- py39-setuptools-pkg>=0 : devel/py-setuptools-pkg@py39
- arm-none-eabi-gcc : devel/arm-none-eabi-gcc
- e2fsprogs-libuuid>=0 : misc/e2fsprogs-libuuid
- gnutls>=0 : security/gnutls
- bison : devel/bison
- gmake>=4.3 : devel/gmake
- python3.9 : lang/python39
- pkgconf>=1.3.0_1 : devel/pkgconf
- There are no ports dependent upon this port
Configuration Options:
- No options to configure
- Options name:
- sysutils_u-boot-rpi2
- USES:
- bison gmake python:build pkgconfig shebangfix tar:bz2
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|