- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Reviewed by:	kwm@
Approved by:	kwm@ (gnome@)

Update math/gsl to 1.16 and adjust some dependent ports

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

Update to 0.48.4.

Convert to optionsNG, update Makefile and comment. Remove shlib versions.
add USE_GCC=any since it doesn't compile with clang, and restrict manpages to
the english version only.

- Bump port after ImageMagick update
- Remove version on Magick++
- Bump PORTREVISION

- Remove SITE_PERL from *_DEPENDS

Approved by: portmgr@ (bapt@)

- update png to 1.5.10

Fix various errors in ports distinfo
(yii-1.1.9.r3527.tar.gz verified against upstream sources)

Switch libwpg dependency to fix the upgrade.

Submitted by:   bsam

Update to 0.48.2.

PR:             163179
Submitted by:   bsam

Update poppler to 0.18.0.

The qt3 bindings are removed upstream.
The glib library lost the last gdk-pixbuf code. And rename it from
-gtk to -glib.

Thanks to:      pav for a exp-runs
                bapt for double checking the libreoffice ports

Bump PORTREVISION and ImageMagick shared library

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Chase poppler shlib bumps.

Update math/gsl to 1.15, and adjust PORTREVISION
and LIB_DEPENDS of dependent ports

Update to 0.48.1.

- Update graphics/libwpg to 0.2.0 release
- Update textproc/libwpd to 0.9.0 release
- Add graphics/libwpg01 and textproc/libwpd08 as support libraries only
- Take maintainership of textproc/libwpd[08]    [1]
- Chase dependencies in related ports
- Describe updating procedure in UPDATING

Approved by:    Mikhail Teterin (maintainer) via mail [1]

Fix a bug that caused the cursor position markers are not cleared from rulers
[1].
Add MAKE_JOBS_SAFE.

Reported and fix tested by:     mux@
Obtained from:          Inkscape bazaar [1]

Add a missing INSTALLS_ICONS.

Reported by:    QAT

Update to 0.48.0.

Update to 0.48.0.

Chase poppler update.

Update ImageMagick to 6.6.2-10

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

Fix lib dependency on graphics / ImageMagick.

Submitted by:   QAT
Pointyhat to:   mm@

- fix build for png-1.4.1

- Bump PORTREVISION to chase the update of math/gsl

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

Fix an infinite loop when opening a file. Bump the PORTREVISION.

PR:             ports/142903
Submitted by:   Thinker K.F. Li <thinker@branda.to>

- update to jpeg-8

Attempt to fix the build on 6.X.

Switch the poppler option to be true by default.  This reenables support
for importing EPS and PDF files by default.

Reported by:    Jan Henrik Sylvester <me@janh.de>

Chase math/gsl update,
bump PORTREVISION

Add depend on math/gsl.

Submitted by:   Peter Ulrich Kruppa <ulrich@pukruppa.net>

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update boost to 1.39
- Split boost port to separate components, with boost-all metaport

PR:             ports/137054
Submitted by:   Alexander Churanov <churanov.port.maintainer@gmail.com>
(maintainer)

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

- Update ImageMagick to 6.4.9.2
- Libraries Magick++, MagickCore and MagickWand bumped to 2
- Update all ports using libraries above

Fix a botched #if statement.

Fix the build with poppler-0.8.3.

Obtained from:  Inkscape SVN

First all, ahze did most of work. Thanks ahze! Last week or so, I am just
merely pick up and help him. Thanks to many testers in both private and
mailing list emails for report a few of build and dependencies problems.
Also, thanks to marcus and Chess Griffin for test in their tinderboxes.

x11/pixman: Update to 0.10.0
-------------------------------------------------------
Firefox 3 needs it. Orignal, the shared library was bumped and ahze has
added a new feature in our USE_GNOME=ltverhack by can control the number
of shared library. To control the number of shared library, add the
ltverhack:N. Right now pixman has USE_GNOME=ltverhack:9 to make it stays
same at libpixman-1.so.9. If anyone want to use ltverhack:N in one of your
port, you need to make sure the ABI doesn't change to use it..
-------------------------------------------------------

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Chase ImageMagick library version change, bump the PORTREVISION.

PR:             ports/122947
Submitted by:   Dominic Fandrey <kamikaze@bsdforen.de>

-Update to 0.46. [1]
-Remove USE_GCC=3.4+ and X11BASE.

PR:             ports/122386 [1]
Submitted by:   Robert Andersson <streambag@streambag.se> [1]

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Set USE_PERL5/WANT_PERL as appropriate, for ports that either depend on
perl unconditonally, or conditionally.  To be able to conditionalize the
inclusion of bsd.perl.mk, they now need to be defined before the inclusion
of bsd.port.pre.mk.

Hat:            portmgr

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Fix a typo in plist from the previous commit

Update to 0.45.1.

Allow these ports to be built with GCC 4.2.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

-Remove check on FreeBSD 4.x.
-Portlint:
        *Use MAN1_EN and MANLANG.
        *Use DATADIR in plist.

Fix and sort plist.

Add missing dependency on desktopfileutils.

Reported by:    krismail

- Remove gnomeprefix.
  Inkscape is not GNOME application. This also fixes broken locale
  initialization. [1]
- Remove USE_X_PREFIX.

Reported by:    Andrew Muhametshin <andrew@dobrohot.org> [1]

Manually remove extra locale directory.

Reported by:    krismail

Update to 0.45

PR:     108952

Update to 0.44.1.

Add a missing dependency on lcms.

Update to 0.44.  This version required a log2 implementation which was
taken from standards/83845.

- Rename ports

  textproc/gtkspell2 -> textproc/gtkspell
  textproc/gtkspell2-reference -> textproc/gtkspell-reference

portlint:
        -Use lowercase letter in the begin of IGNORE.

Add USE_GETTEXT to appease portlint.

Remove USE_REINPLACE for categories starting with a G

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

The configure script checks for libgnomeprintui, not libgnomeprint. Therefore,
I'm changing the dependency from libgnomeprint to libgnomeprintui. PORTREVISION
bump JIC.

- Update to 0.43
- Make GNOME dependency optional.
- Use bzip2 distfile.
- Add SHA256 checksum.

Switch to <target>:: convention for both patch-autotools and run-autotools,
to allow for easier overriding of these targets by port Makefiles, if
they need to.

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

Update to 0.42.2

IGNORE this port on 4.X due to missing symbols.

Update to 0.42.

Fully-qualify the path to update-desktop-database and update-mime-database in
the plist since /usr/local/bin isn't in pkg_add's PATH. Bump the PORTREVISION.

Update to 0.41.

Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.

Add support for the new GNOME MIME system.

Fix build with gcc 3.4

Reported by:    many

Fix crasher bug. There is a problem in inkscape provoked by
sp_object_invoke_write() call wich result in bunch on gtk signals
emission wich in turn may release parent knot holder object beeng
modified. Current fix is not correct way to resolve the situation but
it let us safely go.

- Update to 0.38.1
- Workaround internal compiller error on -STABLE [1]
- More build patches incl. fix for build with antiqe STL on -STABLE

Reported by:    Lee Harr <missive@hotmail.com> [1]

Update to 0.38

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Add libsigc++ dependency.

Submitted by:   Franz Klammer <klammer@webonaut.com>

Update to 0.37

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Fix build on alpha.

Fix p5-XML-XQL run-time dependency.

Reported by:    Jeremy Messenger <mezz7@cox.net>

- Enable GNOME printing support.
- Fix PLIST.

Update to 0.36

Add inkscape 0.35, a program seeks to become a full featured open
source SVG editor.