11:53 Rene Ladan (rene) 

all: unregister support for expired databases/qt5-sqldrivers-ibase

    1a990ca

22:17 Tobias C. Berner (tcberner) 

framework: move 'phonon4' from qt.mk to kde.mk as 'phonon'

To depend on phonon, you now need

USES=	kde:<ver>
USE_KDE=phonon

if you want to depend on the backend, also add

USE_KDE=	phonon-backend

    b2a438e

15:35 Jason E. Hale (jhale) 

Qt5: Update to 5.15.10

Update devel/qt5-script* and www/qt5-webengine to 5.15.15-lts
Update devel/pyside2* and devel/shiboken2 to 5.15.10

Release note:
https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.10/release-note.md

PR:		273934
Exp-run by:	antoine

    2a5c778

15:17 Christian Weisgerber (naddy) 

audio/opus: bump consumers after update to 1.4

    feb1fa3

19:22 Rene Ladan (rene) 

devel/qt5: exclude sql-ibase which is broken

    f803c72

14:38 Felix Palmen (zirias) 

Mk/Uses/qt.mk: Fix metaports after USE_QT change

devel/qt5 and devel/qt6 use a generated USE_QT that wasn't caught by
commit ddae4e92d8313a1461145e3b4f0232fe463feaee:
	Mk/Uses: always use colon for build/run suffix

Fix it manually.

Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36524

    1b674b6

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

16:55 Loïc Bartoletti (lbartoletti) 

misc/qtchooser: remove

QtChooser allows you to select your version of Qt among those installed.
However, this tool is no longer supported upstream and will not be
available for Qt6.
By default, our Qt installations are done in
${LOCALBASE}/lib/qt${QT_VERSION} as recommended.

We have added symbolic linking for the main binaries to
${LOCALBASE}/bin with the suffix -qt5.

    be86c4f

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

13:34 rene 

Mark ports recursively depending on Python 2.7 for expiration on June 23.

For ports optionally dependending on Python 2.7, just mark those options
as expired. Remove konquerer from the x11/kde-baseapps metaport and bump
its PORTREVISION.

Submitted by:	rene
Reviewed by:	portmgr, adridg, ehaupt, lme, madpilot, pizzamig, se, sunpoet, yuri
Approved by:	portmgr
Differential Revision:	https://reviews.freebsd.org/D28665

 

12:35 tcberner 

Update Qt5 to 5.14.2

Very big thanks go again to kai@ who provided the www/qt5-webengine upgrade (to
5.14.0).
Notably, video capture support was re-enabled.

Announcement:
        https://www.qt.io/blog/qt-5.14-has-released

PR:		244964
Exp-run by:	antoine

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

21:32 tcberner 

multimedia/phonon, multimedia/phonon-gestreamer,
multimedia/phonon-designerplugin: remove flavorse (Qt4 deprecation)

 

11:13 tijl 

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
in the weak wrapper resolves to the weak wrapper itself creating an infinite
call loop that overflows the stack and causes a crash.  Some of the
allocation functions are variants of C++ new and delete and it probably
depends on the compiler whether these variants are used in other parts of
Qt5Webengine.

Remove the weak wrappers (make them Linux specific).  This isn't binary
compatible but we are already breaking that with the changes to the symbol
versions.

[1]
https://github.com/qt/qtwebengine/commit/5c2cbfccf9aafb547b0b30914c4056abd25942a4
[2]
https://github.com/qt/qtwebengine/commit/2ed5054e3a800fa97c2c9e920ba1e6ea4b6ef2a5
[3]
https://github.com/qt/qtwebengine/commit/009f5ebb4bd6e50188671e0815a5dae6afe39db5

Bump all ports that depend on Qt5.

PR:		234070
Exp-run by:	antoine
Approved by:	kde (adridg)

 

14:49 tcberner 

Update Qt5 to 5.12.0

http://blog.qt.io/blog/2018/12/06/qt-5-12-lts-released/

- This breaks support for libressl again. Patches are welcome.

PR:		233705
Exp-run by:	antoine

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

17:39 tcberner 

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

 

17:47 tcberner 

New port: graphics/qt5-wayland

Marketing blurb [1]:
  QtWayland is a Qt 5 module that wraps the functionality of Wayland.
  QtWayland is separated into a client and server side. The client side
  is the wayland platform plugin, and provides a way to run Qt applications
  as Wayland clients. The server side is the QtCompositor API, and allows
  users to write their own Wayland compositors.

This is mostly needed at the moment to make upstream KDE-CI happy, therefore
we don't wire it into the metaport devel/qt5.

It requires a little change to devel/qt5-qmake, as we needed to modify the
installed bsd.conf to know about wayland/egl.

Created together with Adriaan de Groot <groot@kde.org>.

Reviewed by:		rakuco, groot_kde.org
Differential Revision:	https://reviews.freebsd.org/D11744

 

15:52 tcberner 

Prepare the removal of x11-toolkits/qt5-declarative

devel/qt5-declarative has not been released since Qt 5.5.1, and it
starts to lead to runtime conflicts with qt5-quick if installed.

* No port is actually still using it (there are ports that had it as a
  dependency, but do not really require it -- bump these, and remove it).
* Remove it from the Qt 5 metaport.

Reported by:	Armin Pirkovitsch
Reviewed by:	rakuco
Approved by:	rakuco (mentor)
Differential Revision:	https://reviews.freebsd.org/D10673

 

09:46 rakuco 

Update the Qt5 ports to 5.6.1.

This took longer than expected, but there are quite a few changes to the
existing ports and a few new ones.

General upstream changes:
- Starting with Qt 5.6.2, Qt will fail at configuration time if LibreSSL is
  being used. According to the discussion here:
  https://codereview.qt-project.org/#/c/154800/
  The Qt project is not opposed to LibreSSL, but does not want to mix
  support for it into the OpenSSL backend code, especially as they move
  towards supporting OpenSSL 1.1.
  People interested in LibreSSL support are welcome to submit a separate
  backend upstream, but are expected to maintain it. We (kde@) are not
  opposed to carrying some patches authored by others in the future, as long
  as they are not huge and destabilizing.
- When Qt detects the compiler supports C++11, it will pass -std=gnu++11 by
  default (this is an upstream change). You can add "CONFIG -= c++11" to
  your .pro. Qt 5.7 will require C++11.
- www/webkit-qt5: The QtWebKit module is deprecated upstream, and is shipped
  separately as a community release tarball. kde@ does not have an ETA for a
  qt5-webengine port, as it requires a huge effort (and number of patches)
  similar to maintaining www/chromium itself.
- x11-toolkits/qt5-declarative has been deprecated upstream. The last
  release is 5.5.1.

Relevant changes:
- devel/qmake5: The freebsd-clang mkspec has become the default mkspec on
  FreeBSD, replacing the outdated freebsd-g++ one that was moved to
  unsupported/ (it still works though).
- devel/qt5-qdoc: qdoc was moved to qttools upstream, but its data files are
  still in qtbase. The data files are now in the qt5-qdoc-data port.
- misc/qt5-doc: Clean up and stop requiring a compiler and fumbling with
  mkspecs. Instead of running the `configure' script, which requires a
  compiler and adjustments to the mkspecs files and also ends up building a
  new qmake binary, we now leverage USES=qmake to generate all the Makefiles
  from the top-level qt.pro. Getting this to work requires some tricks,
  though, and qt.conf.in has a longer explanation of what's being done.
  Switch to USES=gmake to be able to drop MAKE_JOBS_UNSAFE=yes.

New ports:
- comms/qt5-serialbus
- devel/qt5-qdoc-data
- x11-toolkits/qt5-quickcontrols2

Big thanks to Adriaan de Groot (groot@kde.org), tcberner@ and Loise Nolden
(nolden@kde.org) for the huge amount of work they put into this
patch. Loise in particular also sent quite a few changes upstream that were
essential for this update to work.

PR:		211916

 

19:10 pi 

devel/qt5, Mk/bsd.qt.mk: Add qt5-doc to the list of ports devel/qt5 depends on

The patch moves the "doc" port in bsd.qt.mk from _USE_QT4_ONLY to
_USE_QT_ALL and bumps the PORTREVISION in devel/qt5 for the inclusion
of the qt5-doc port into the qt5 metaport.

Pre-Work for updating qtcreator to 4.0 for adding options to install
qt5-doc and qt5-examples to make qtcreator actually usable for
serious qt development.

PR:		209910
Submitted by:	Ralf Nolden <nolden@kde.org> (kde)

 

18:10 rakuco 

Update Qt5 to 5.5.1.

This is the latest stable release at time of writing.

Release announcement: http://blog.qt.io/blog/2015/07/01/qt-5-5-released/
New features in Qt 5.5: https://wiki.qt.io/New_Features_in_Qt_5.5

As usual, huge thanks to Tobias Berner (tcberner@gmail.com) for all his work
on these ports in kde@'s experimental area51 repository. He's the one who
started the update and did a lot of the initial work on Qt 5.5. Ralf Nolden
(nolden@kde.org) has contributed the initial version of most of our new Qt5
ports.

Also thanks to Yuri Victorovich (yuri@rawbw.com) for contributing PR 205805
with his own patch for the 5.5.1 update. Some of his changes there prompted
additional fixes and changes present in the final patch generated from our
experimental repository.

New ports:
- comms/qt5-connectivity, comms/qt5-sensors, devel/qt5-location,
  graphics/qt5-3d, net/qt5-enginio, x11-toolkits/qt5-canvas3d,
  x11-toolkits/qt5-uiplugin.

General changes in all Qt5 ports:
- All Qt5 ports are now built with -Wl,--as-needed to avoid overlinking,
  which is a problem with qmake-based because the libraries passed to the
  linker come from the modules .pri files and many are not necessary.
- With this change, several ports had their USE_QT5 lines adjusted to
  explicitly include some libraries that were pulled in implicitly, and to
  exclude libraries no longer required with -Wl,--as-needed.

Changes in specific ports:
- devel/qt5: Drop the SQL_PLUGINS and TOOLS options and depend on all Qt5
  ports by default. It makes the Makefile much simpler, and those options
  were already on by default.
- devel/qt5-core: The clang+base libstdc++ workaround has been expanded and
  more C++11 features have been disabled when that combination is used by a
  port (basically, FreeBSD 9 with USES=compiler:c++11-lang). The disabled
  features have explanations for why they were disabled in the patched
  header itself.
- devel/qt5-designer: uiplugins has been split out following a similar
  change upstream. By depending on qt5-uiplugin, qt5-uitools avoids having
  to depend on the big qt5-designer port.
- multimedia/qt5-multimedia: The port now uses GStreamer 1.0 instead of
  0.10.
- net/qt5-network: The port now depends on libproxy for proxy settings.
  Using libproxy allows proxy settings to be read from different sources,
  and also allows .pac files to work with Qt.
- www/qt5-webkit: The port now uses GStreamer 1.0 instead of 0.10.

PR:		205805
PR:		206435

 

21:57 makc 

devel/qt5:
- Add missing dependence on websockets

Reported by:	Ralf Nolden <nolden@kde.org> via irc

 

17:00 alonso 

Fix missing entries for qt5-webengine

Add entries for qt5-webengine introduced in revision 388182 to connect it
with the devel/qt5 port, and add a hook to the www Makefile.

Submitted by:   Tobias Berner <tcberner@gmail.com> via area51 commit
Approved by:    makc (mentor)

 

19:22 rakuco 

Convert kde@ ports to USES=metaport.

Submitted by:	alonso@

 

09:37 rakuco 

Update Qt5 to 5.4.1.

This is probably the first time our Qt 5 ports are tracking the latest
upstream release :-)

There isn't much to report in this update, thanks to the effort spent in the
5.2->5.3 update: a lot of the work is just small plist and patch updates.
Thankfully, several patches have been upstreamed and are not needed on our
side anymore.

I would like to thank Alex Richardson <arichardson.kde@gmail.com> and Tobias
Berner <tcberner@gmail.com> for their help with the plist updates and
general testing.

PR:		198585

 

21:40 makc 

devel/qt{4,5}:
- Convert to NO_ISTALL
- Rework dependency handling to avoid inclusion of bsd.port.options.mk

 

01:15 rakuco 

Add sysutils/qt5-qtpaths.

This is a command-line interface to QStandardPaths, part of qttools. It is
used by the KDE Frameworks 5 ports, which will be added in the future.

While here, also add x11-toolkits/qt5-quickcontrols to devel/qt5 which I had
forgotten to do before.

Submitted by:	Tobias Berner <tcberner@gmail.com>

 

09:39 rakuco 

Update Qt5 ports to 5.3.2.

Proudly presented by the KDE on FreeBSD team, with several guest stars.

This update took way longer than initially expected due to us previously
accumulating assumptions and changes to Qt's build system that finally bit
us back with the 5.3 release series, so we had to do a fair amount of
cleanup.

New ports:
- comms/qt5-serialport: Qt functions to access serial ports, originally
                        based on work by Fernando Apesteguia. [1]
- devel/qt5-qdoc: Qt documentation generator, the Qt5 equivalent of
                  devel/qt4-qdoc3. Originally worked on by Tobias Berner.
                  It had already been half-split from devel/qt5-buildtools,
                  we just needed to finish the work.

Dead ports:
- devel/qt5-qmldevtools: Merged into lang/qt5-qml.

Minor changes:
- devel/qt5: Add x11/qt5-x11extras and the new ports to the dependency list.
- graphics/qt5-imageformats: The port now supports the JPEG2000, WEBP,
                             Direct Draw Surface and ICNS formats.
- multimedia/qt5-multimedia: The ALSA and PULSEAUDIO options are now
                             mutually exclusive due to changes introduced in
                             Qt 5.3.0 (the ALSA code is now a proper plugin
                             that is only built if PulseAudio is not used).
- x11/qt5-x11extras: Add USE_LDCONFIG since the port installs a shared
                     library.

The big changes:
- bsd.qt.mk: Set QMAKESPEC instead of QMAKEPATH. [3]
  QMAKEPATH does much more than we want now that we call qmake from the top
  of ${WRKSRC}. qmake uses QMAKEPATH when evaluating the QMAKE_MKSPECS
  property, which is in turn used by qt_config.pri to load the .pri files in
  mkspecs/modules.

  In practice, this means that if people have an older Qt installation those
  files will be used and QT_CONFIG will have values such as "gui" even if
  one is building a port like textproc/qt5-xml, which passes -no-gui to the
  configure script. Consequently, unintended code paths may be enabled or
  the configuration step can just fail if the .pro files expect values that
  are not present in the system-wide, older .pri files.

  We avoid all those problems if we use QMAKESPEC, as qmake does not take
  its value into account when evaluating the QMAKE_MKSPECS property and will
  only parse the files in the mkspec's directory (mkspecs/freebsd-clang, for
  example, instead of all the files in mkspecs).

- Stop explicitly passing ${LOCALBASE} to the compiler. [3]
  qmake's behavior has changed in Qt 5, and the paths set in QMAKE_INCDIR
  and QMAKE_LIBDIR in the mkspecs are passed before any others, such as the
  ones in the build directory themselves.

  In practice, this means that we end up with linker calls like this:

  c++ -o libfoo.so foo.o bar.o -L/usr/local/lib -L/wrkdir/build/lib
      -lQt5Gui -lQt5Core

  So if one already has Qt installed in the system, the older, already
  present version of the libraries in /usr/local/lib will be used instead of
  the newly-built ones in /wrkdir/build/lib.

  QTBUG-40825 discusses this behavior upstream, but there has been no
  agreement on a solution yet.

  For now, the solution adopted is to make the compiler and the linker aware
  of those paths but only try them last after all others, and this is
  achieved by setting the CPATH and LIBRARY_PATH environment variables when
  qmake is being used.

  In addition to setting them in CONFIGURE_ENV and MAKE_ENV, we also need to
  stop changing QMAKE_INCDIR and QMAKE_LIBDIR as well as filter those paths
  from the pkg-config calls qtbase's configure script makes.

- Call qmake from the root of the ${WRKSRC}.

  In Qt 5.3, Qt's build infrastructure has undergone some changes that make
  our previous approach of calling qmake from the directories we want to
  build stop working. Things would break even more in Qt 5.4, in which
  qtbase's configure script does not accept the -process, -fully-process and
  -dont-process arguments anymore (it always behaves as if -process had been
  used).

  Bite the bullet and start calling qmake from ${WRKSRC}. The largest part of
  this change involves changing lines in Makefiles from
    WRKSRC_SUBDIR=	foo/bar
  to
    BUILD_WRKSRC=		${WRKSRC}/foo/bar
    INSTALL_WRKSRC=		${WRKSRC}/foo/bar
  as well as adding patches to .pro files to avoid entering other
  subdirectories and removing post-configure targets that are not necessary
  anymore.

  Since qmake needs to be called from the top of ${WRKSRC} anyway, we can
  also simplify the configuration process for the qtbase ports a little.
  Looking at r10019 it is not clear why we started calling qmake in the
  pre-configure target in addition to the post-configure one (while also
  skipping it in do-configure), but we can now drop this call since letting
  configure behave as if -process had been passed means it will call qmake
  on its own and overwrite the files generated by the pre-configure call. We
  still need to call qmake in post-configure though, as the configure script
  does not pass -recursive when calling qmake and we need to be able to call
  make from any subdirectory when building.

PR:		194762 [1]
PR:		194566 # exp-run with base GCC and clang
PR:		194088 [3]

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

16:50 makc 

KDE/FreeBSD team is happy to present Qt 5 in ports!

Alberto Villa (avilla@) has done all the hard work to create Qt 5 ports.
Trivial update from 5.2.0-beta1 to 5.2.1 by me.

Special thanks for Adriaan de Groot <groot@kde.org> for his assistance for
Qt-5.2.0 update.

Approved by:	portmgr (bapt) (for Mk/bsd.port.mk)