Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

devel/cvsgraph: add depends for more features

Remove # $FreeBSD$ from Makefiles.

- fix WWW

- fix linking

- update libgd to 2.3.0
- new option RAQM
- resurrect deprecated gdlib-config
- bump dependend ports

devel/cvsgraph: remove unnecessary REINPLACE_CMD

Convert to UCL & cleanup pkg-message (categories d)

- update libgd to 2.2.2
- new MASTER_SITES
- add security patch
PR:		210913
Submitted by:	Piotr Kubaj
MFH:		2016Q3
Security: CVE-2015-8874
Security: CVE-2016-3074
Security: http://www.openwall.com/lists/oss-security/2016/07/12/4

Remove useless WRKSRC definitions.

While there, correct DEV_WARNINGS when they occur.

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

- Add LICENSE
- Pet portlint
- Switch to options helpers
- Regenerate patches with `make makepatch`

Cleanup plist

Support stage
Add docs and examples options
Use pkg-plist

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 1)

- Use single space after WWW:

- update libdg to 2.1.0

- Strip header at request of original creator

Submitted by:	trevor
With hat:	portmgr

- update png to 1.5.10

-remove MD5

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Release maintainership.

Thanks Serge for maintaining these ports all these years!

PR:             (private mail)
Submitted by:   Serge Gagnon <serge.gagnon.1 (at) ulaval.ca>

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Force commit to correct the previous entry:
- Update to 1.7.0

PR:             129090
Submitted by:   "Beat Gätzi" <beat@chruetertee.ch>
Approved by:    maintainer timeout

- Update to 1.7.0

PR:             129090
Submitted by:   "Beat Gätzi" <beat@chruetertee.ch> (maintainer)

- Change maintainer's email

PR:             ports/118662
Submitted by:   Serge Gagnon <serge.gagnon AT b2b2c.ca> (maintainer)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 1.6.1

PR:             ports/99963
Submitted by:   clsung
Reviewed by:    maintainer (Serge Gagnon)
Approved by:    maintainer

Update to 1.6.0.
- Suffix default configuration file with .sample
- Give maintainership to submitter

PR:             ports/93221
Submitted by:   Serge Gagnon <serge.gagnon@b2b2c.ca>

Reset maintainership to ports@ after ~4 months without any response to any
PR.

Thanks for contributing.

Since the acroread7 port is a somewhat important port for our users, I
will hand it over to emulation@ if no _active_ *committer* takes it
before the ports freeze.

While I'm here:
 - fix a little nit in the csound port (I think the intention was to
   create no backup file instead of creating one with a "-e" extension)
 - set ARCH to i386 in the amd64 case for the acroread7 port. This
   is a work-around to be able to install everything when a dependency
   is not already installed (ARCH is read-only in sub-makes, so the
   dependencies can't change it). This should be removed when the
   dependencies are fixed or converted to use bsd.linux-rpm.mk. [1]

Not objected to by:     portmgr (explicit: krion; silence: rest)
Maintainer timeout:     ~4 months
Submitted by:           Sangwoo Shim <sangwoos@gmail.com> [1]
PR:                     87985 [1]

SHA256ify

Approved by:    krion@

- Update to 1.5.2
- Allow on all archs

PR:             ports/86389
Submitted by:   UEMURA Tetsuya <t_uemura@macome.co.jp>
Approved by:    maintainer timeout (trevor, 17 days)

This only works on architectures where sizeof(int) == sizeof(void*), i.e.
i386.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

This doesn't compile on ia64.

Noticed by:     kris

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Add size data.

This doesn't compile on the Alpha or x86-64.

reported by:    kris
Approved by:    portmgr

Remove my e-mail address from DESCR files of ports
I have contributed, in order to attract less spam.

Update to 1.4.0.

PR:             58103
Submitted by:   Philip M. Gollucci of P6M7G8 Consulting

o Main modification
  graphics/gd(based on 1.8.4)    -> graphics/gd1
  graphics/gd2(based on 2.0.15)  -> graphics/gd
  graphics/p5-GD(based on 1.41)  -> graphics/p5-GD1
  graphics/p5-GD2(based on 2.07) -> graphics/p5-GD
  japanese/gd                    -> japanese/gd1
  japanese/gd2                   -> japanese/gd
o Include some feature
  WITH_XPM(w/, w/o WITHOUT_X11)
o Chase this modification
o Fix build error [1]

PR:             ports/54540
Submitted by:   Ports Fury
Approved by:    maintainer (blanket)
Reported by:    bento via kris [1]

o Change library name from libgd to libgd1.
o Do not install everything except headers and libraries
  (to avoid conflicting with graphics/gd2)
o Fix dependency on new libgd1(for many ports).

PR:             ports/54100
Submitted by:   Ports Fury

Retire comment file.

PERL -> REINPLACE
And some ports have USE_PERL5=yes now.

Add missing manpage

Update to 1.20.

PR:             37735
Submitted by:   Lapo Luchini

Make /home/ncvs/ the default path for CVSROOT.

Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command;   the ECHO
macro is set to "echo" by default, but it is set to "true" if   make(1) is
invoked with the -s option while ECHO_CMD is always set to   the echo command.  
 

Bump png major    

Correct the packing list.    

Replace explicit build dependency on bison with USE_BISON knob    

Update to 1.1.2.    

An erroneous commit to this file by sobomax broke the port for   "make patch". 
Also, I forgot to "cvs add" the correct file from   PR 25808.    

Update to 1.1.1.  Quash an unnecessary "#include <getopt.h>" that   was breaking
bento builds.    

FreeBSD doesn't have/need getopt.h.    

Update for new libgd soname.    

Update to 1.0.1.  The sorting bug has been fixed.    

new port of cvsgraph 1.0.0, a utility for charting cvs/rcs history