| non port: audio/xanalyser/Makefile |
|
SVNWeb
|
Number of commits found: 27 |
|
Sun, 16 Jul 2023
|
[ 15:27 Yuri Victorovich (yuri)  ]    ed41aec
audio/xanalyser: Fix build with clang-16 by adding USE_CXXSTD
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 7 Apr 2021
|
[ 08:09 Mathieu Arnold (mat) ] cf118cc (Only the first 10 of 8873 ports in this commit are shown above. )
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sun, 6 Oct 2019
|
[ 00:22 db ]  
libXp is being deprecated.
Also fixed Makefile to properly patch xanalyser.spec.in
Replaced hard coded /usr/local in favour of PREFIX and LOCALBASE as needed
PR: ports/241001
|
|
Tue, 1 Oct 2019
|
[ 18:11 db ]
Unbreak port due to missing dependencies
Regenerate bad non makepatch patch
Give to hamradio@ team
Reported by: pkg-fallout
|
|
Mon, 3 Sep 2018
|
[ 18:20 pi ]
audio/xanalyser: fix a ioctl call
- SNDCTL_DSP_GETBLKSIZE() is in FreeBSD a read only ioctl()
Need to use SNDCTL_DSP_SETBLKSIZE() to really set the blocksize.
PR: 193373
Submitted by: hselasky
Reviewed by: Walter Schwarzenfeld <w.schwarzenfeld@utanet.at>
Approved by: db (maintainer)
|
|
Fri, 19 Jan 2018
|
[ 01:22 db ]
- Fix build under clang6
- replace pkg-plist with PLIST_FILES
- add LICENSE
Reported by: pkg-fallout
|
|
Thu, 14 May 2015
|
[ 10:15 mat ] (Only the first 10 of 1814 ports in this commit are shown above. )
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
|
|
Tue, 1 Jul 2014
|
[ 02:49 amdmi3 ]
- Switch to USES=libtool
- Convert USE_BZIP2 to USES
Approved by: portmgr blanket
|
|
Mon, 30 Dec 2013
|
[ 20:39 db ]
- Enable staging
|
|
Fri, 20 Sep 2013
|
[ 14:36 bapt ] (Only the first 10 of 879 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)
|
|
Tue, 9 Jul 2013
|
[ 21:20 bapt ]
Convert from USE_MOTIF to USES=motif
While here:
Convert to USES=gmake as well
Trim headers
|
|
Mon, 2 May 2011
|
[ 12:44 makc ] (Only the first 10 of 195 ports in this commit are shown above. )
Bump PORTREVISION after open-mofit update
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Thu, 27 May 2010
|
[ 00:32 db ]
- Update to 1.32
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
|
Sun, 23 Mar 2008
|
[ 16:44 miwi ] (Only the first 10 of 104 ports in this commit are shown above. )
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION
Approved by: portmgr (xorg cleanup)
|
|
Mon, 23 Jul 2007
|
[ 09:36 rafan ] (Only the first 10 of 437 ports in this commit are shown above. )
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Fri, 20 Apr 2007
|
[ 21:27 db ]
- cleanup non-supported [1] (with changes)
- update to 1.30 [2]
PR: ports/111694 [1]
Submitted by: edwin [1], Diane Bruce (maintainer) [2]
Approved by: ehaupt (mentor)
|
|
Fri, 19 Jan 2007
|
[ 18:14 db ] (Only the first 10 of 24 ports in this commit are shown above. )
Change my MAINTAINER: line in Makfile to db@FreeBSD.org
fix simple typo in xwota Makefile while at it.
Approved by: ehaupt (mentor)
|
|
Fri, 1 Dec 2006
|
[ 14:45 laszlof ]
1) Move patch-Makefile.in into REINPLACE_CMD
2) Respect X11BASE
PR: ports/105922
Submitted by: Diane Bruce <db@db.net> (maintainer)
|
|
Fri, 17 Nov 2006
|
[ 00:15 xride ]
Mark BROKEN for 4.X
Notified by: pointyhat
Approved by: maintainer, tmclaugh (mentor)
|
|
Thu, 9 Nov 2006
|
[ 18:41 xride ]
Add xanalyser 1.29
XAnalyser is a program to analyse a stereo audio signal. It has two displays:
Frequency Spectrum
Using Fast Fourier Transform, the time domain of the signal is transformed into
the frequency domain, i.e. the amplitude (in logarithmic scale) of the
audio signal is plotted versus the frequency. Either the sum of the
left and right channel of the audio signal can be shown or both
channels simultaneously.
XY Scope
Roughly speaking, the audio signal of left channel deflects a point
horizontally and the right channel vertically (just as the beam of a CRT
would do). Thus, an audio signal only present on the left channel produces (Only the first 15 lines of the commit message are shown above )
|
Number of commits found: 27 |
As an Amazon Associate I earn from qualifying purchases.