| non port: archivers/ucl/Makefile |
|
SVNWeb
|
Number of commits found: 40 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:20 Tobias C. Berner (tcberner) ] 1ced9d2 (Only the first 10 of 199 ports in this commit are shown above. )
archivers: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Albert Vernon <f3cun3c02@sneakemail.com>
* Alex Dupre <ale@FreeBSD.org>
* Alex Samorukov <samm@freebsd.org>
* Alexander Kuehn <freebsd@nagilum.org>
* Alexander Logvinov <ports@logvinov.com>
* Alexander Zhuravlev <zaa@zaa.pp.ru>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alexey Dokuchaev <danfe@regency.nsu.ru>
* Anders Nordby <anders@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 21 Dec 2021
|
[ 18:46 Po-Chuan Hsieh (sunpoet) ] 5c0d07c
archivers/ucl: Update WWW
- Update pkg-descr
- Take maintainership
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 12 Jan 2016
|
[ 16:20 amdmi3 ]   (Only the first 10 of 791 ports in this commit are shown above. )
Convert LICENSE= "GPLxx # or later" to "GPLxx+"
Approved by: portmgr blanket
|
|
Thu, 7 Jan 2016
|
[ 14:43 amdmi3 ]
- Clarify LICENSE
- Switch to options helpers
|
|
Fri, 28 Nov 2014
|
[ 02:12 koobs ]
archivers/ucl: Strip files, Add CONFLICTS (libucl)
- Strip installed binaries and libraries
- Add CONFLICTS against libucl
- Add LICENSE_FILE
- pkg-descr: Strip trailing-slash from WWW:
|
|
Wed, 11 Jun 2014
|
[ 18:55 marino ] (Only the first 10 of 99 ports in this commit are shown above. )
Reset the 99 ports still listed under sylvio@
Sylvio's last commit was 17 months ago, a full 5 months after all of his
ports could have been reset per policy. Given the push to complete
staging (48 ports are still unstaged, something like 70+ have already
been staged by other committers) and given that PRs are automatically
assigned but never addressed, it's better just to reset all the ports and
PRs so that it's clear to others that these ports are free to maintain.
Approved by: portmgr (implicit)
|
|
Mon, 5 May 2014
|
[ 21:54 tijl ]
Drop libtool patch and .la library.
|
|
Wed, 23 Apr 2014
|
[ 13:25 tijl ] (Only the first 10 of 462 ports in this commit are shown above. )
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
|
|
Sat, 8 Mar 2014
|
[ 20:05 sunpoet ]
- Add OPTIONS_DEFINE
|
|
Wed, 5 Feb 2014
|
[ 14:02 bapt ]
USES libtool
|
|
Thu, 26 Dec 2013
|
[ 16:24 bapt ]
Support stage
|
|
Fri, 20 Sep 2013
|
[ 13:11 bapt ] (Only the first 10 of 221 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
archivers)
|
|
Tue, 18 Dec 2012
|
[ 07:57 danfe ] (Only the first 10 of 32 ports in this commit are shown above. )
For a number of ports in archives category, trim the header and drop leading
indefinite article from COMMENT line; also fix few noticed styles bugs while
I am here.
|
|
Thu, 19 May 2011
|
[ 18:25 sylvio ] (Only the first 10 of 20 ports in this commit are shown above. )
- Add license
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Fri, 27 Nov 2009
|
[ 22:52 sylvio ] (Only the first 10 of 100 ports in this commit are shown above. )
- Update my mail address to FreeBSD
Approved by: miwi (mentor)
|
|
Sat, 19 Sep 2009
|
[ 17:07 miwi ]
- Pass maintainership to submitter
PR: 138587 138586 138584
Submitted by: Sylvio Cesar <scjamorim@bsd.com.br>
Feature safe: yes
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Thu, 1 Feb 2007
|
[ 02:42 kris ] (Only the first 10 of 348 ports in this commit are shown above. )
Use libtool port instead of included version to avoid objformat a.out botch
|
|
Mon, 14 Aug 2006
|
[ 09:56 clsung ]
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Tue, 12 Apr 2005
|
[ 03:26 obrien ] (Only the first 10 of 773 ports in this commit are shown above. )
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
|
|
Mon, 11 Apr 2005
|
[ 08:04 obrien ] (Only the first 10 of 776 ports in this commit are shown above. )
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
|
|
Tue, 12 Oct 2004
|
[ 07:54 sergei ]
- Update to 1.03
PR: ports/72471
Submitted by: Dima Panov <redfox@Fluffy.Khv.RU>
While I'm here:
- Install some additional documentation
- Shorten COMMENT
- Various cleanup
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Sat, 17 Apr 2004
|
[ 19:12 krion ]
- Fix configure warning
PR: 65668 65669 65670 65671 65672 65673
Submitted by: Roman Neuhauser <neuhauser at chello dot cz>
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Fri, 27 Feb 2004
|
[ 12:10 clement ]
- Pacify portlint and use misc macros
- remove pkg-plist (fastjar and stuffit)
|
|
Sun, 28 Dec 2003
|
[ 15:18 pav ]
- Update to 1.02
PR: ports/60653
Submitted by: Vincent Tantardini <vinc@FreeBSD-fr.org>
|
|
Tue, 29 Jul 2003
|
[ 09:12 sobomax ] (Only the first 10 of 128 ports in this commit are shown above. )
Let be hohest: I really don't have a time now to properly maintain all
these great pieces of software, so that let others with more free time
to take over them.
|
|
Fri, 7 Mar 2003
|
[ 05:55 ade ] (Only the first 10 of 42 ports in this commit are shown above. )
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
|
|
Sat, 28 Dec 2002
|
[ 03:49 edwin ]
Removed MASTER_SITE_SUNSITE from the master_sites, it doesn't appear
it has ever been there.
Noticed by: portsurvey.
|
|
Fri, 30 Aug 2002
|
[ 12:04 sobomax ]
Update to 1.01.
PR: 39197
Prompted by: Szymon Roczniak <simon@dischaos.com>
|
|
Mon, 14 Jan 2002
|
[ 10:14 sobomax ]
Update MASTER_SITES, WWW and autor's e-mail.
|
|
Wed, 14 Feb 2001
|
[ 05:43 lioux ] (Only the first 10 of 34 ports in this commit are shown above. )
typo clean up police: \s -> \t
|
|
Mon, 29 Jan 2001
|
[ 19:39 sobomax ]
Add ucl 0.92, a data compression library with low memory usage during
decompression and competitive with zlib compression ratio.
|
Number of commits found: 40 |
As an Amazon Associate I earn from qualifying purchases.