19:12 sunpoet 

Update comment: add samba 4.6

 

23:37 antoine 

Switch default version of samba from 4.3 to 4.4

With hat:	portmgr
Differential Revision:	https://reviews.freebsd.org/D10131

 

21:59 antoine 

- Add USES=samba to handle dependency on samba
  Valid ARGS:  build, env, lib, run (default: build,run)
- Add SAMBA_DEFAULT to bsd.default-versions.mk (default: 4.3)
- Remove obsolete samba36 ports
- Modify samba4x ports to install libsmbclient
- Convert the ports tree to USES=samba

Reviewed by:	mat
Differential Revision:	https://reviews.freebsd.org/D8919

 

17:38 acm 

- Freepascal update to 3.0.2
- Lazarus BUMP PORTREVISION
- Connect www/fpc-googleapi and devel/fpc-fcl-pdf

 

17:31 lifanov 

add databases/mysqlwsrep56-server

- MySQL version enabled for Galera Replication

PR:		214807
Submitted by:	Philip Stoev <philip.stoev@galeracluster.com>
Reviewed by:	matthew, mat, mmokhi
Approved by:	portmgr (mat)
Differential Revision:	https://reviews.freebsd.org/D9427

 

21:20 tijl 

- Remove inclusion of bsd.default-versions.mk from ftp/curl/Makefile so
  bsd.default-versions.mk can rely on ARCH being defined.
- In bsd.port.mk move inclusion of bsd.default-versions.mk from the
  pre-makefile section to the options section so the variables can be used
  earlier.  Also put the bit of code sitting between the options section and
  the pre-makefile section into the options section.
- Remove last few cases where ports set WITH_OPENSSL_PORT.  This variable is
  handled in bsd.default-versions.mk and some ports were setting it after
  including bsd.port.options.mk.  After FreeBSD 9 EoL all but a few ports,
  and then only when setting non-default options, work without setting that
  variable.

PR:		215996
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

22:59 gerald 

Remove 4.6 as a valid option for USE_GCC and GCC_DEFAULT; it has not
been used in the Ports Collection for quarters and hardly would make
sense (or even work) as default GCC version.

 

18:06 sunpoet 

Update comment: add gcc 6, perl 5.24 and php 7.1

 

15:44 tijl 

Update Linux CentOS 7 ports to 7.3.1611.  While 7.2 had semi-official i386
packages there are no such packages for 7.3 yet so i386 support has been
marked IGNORE for now.

Change DIST_SUBDIR to just "centos" so distfiles that remain the same
between major versions don't have to be redownloaded.

Remove fmake hacks from linux.mk.

Submitted by:	Piotr Kubaj <pkubaj@anongoth.pl>

 

12:18 tijl 

Allow ARCH to be undefined to accommodate ftp/curl/Makefile.

Reported by:	Peter Blok <pblok@bsd4all.org>

 

10:44 tijl 

Make 64 bit Linux packages the default on amd64.

 

18:54 feld 

Welcome Percona 5.7 ports to the tree

- client and server version 5.7.16-10
- pam-for-mysql: compatible with newer MySQL API (MySQL 5.7+)

Thanks to all who have worked on Percona, MariaDB, and MySQL ports. Your
tireless efforts have been instrumental in making this port happen.

Differential Revision:	https://reviews.freebsd.org/D8785

 

19:23 swills 

Switch default Ruby version from 2.2 to 2.3

PR:		215013

 

20:34 lifanov 

add databases/mysql80-server and databases/mysql80-client

This is a development snapshot of upcoming MySQL 8.0.

PR:		215738
Submitted by:	Mahdi Mokhtari <mokhi64@gmail.com>
Reviewed by:	matthew, feld
Approved by:	matthew (mentor), feld
Differential Revision:	https://reviews.freebsd.org/D9031

 

16:50 rene 

Drop support for Perl 5.18 (infrastructure part)

 

16:47 rene 

Drop support for Linux Fedora 10 (infrastructure part)

Submitted by:	rene
Reviewed by:	bapt
Differential Revision:	https://reviews.freebsd.org/D8653

 

19:00 swills 

Add Ruby 2.4.0

While here, remove local patches that are no longer needed and simplify
post-patch target.

 

16:43 sunpoet 

- Add python 3.6
- Remove ruby 2.0
- Add tcl/tk 8.7

 

09:15 gerald 

Long awaited, finally update the default version of GCC in the Ports
Collection as well as the lang/gcc port from GCC 4.8.5 to GCC 4.9.4!

See http://gcc.gnu.org/gcc-4.9/changes.html for an extensive list of
changes and http://gcc.gnu.org/gcc-4.9/porting_to.html for information
on how to port to that new version (if necessary).

files/java-patch-hier required adjustments, gcc/files/patch-arm-libcpp
is not needed any longer (merged upstream), and we're also loosing the
local Stack Protector patches/backports.

PR:		196712
Tested by:	antoine (-exp runs)
Supported by:	antoine, kwm, and others

 

23:32 sunpoet 

- Fix typo

 

14:34 mat 

Change the default Perl version to 5.24.

We have been stuck with Perl 5.20 for too long.  Now that the main
problem, mod_perl2, has been updated to work with Perl 5.22+, we can go
and live with a modern Perl.

PR:		213810
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

 

14:15 feld 

Introduce USES=varnish

You can now set the default version of Varnish with DEFAULT_VERSIONS to
build Varnish and its modules against your desired Varnish release
train.

The default version of Varnish throughout the ports tree will remain as
www/varnish4 until at least 2017Q1 when it will be changed in HEAD to be
www/varnish5. This should allow plenty of time for migration and for
stabilization of the changes in Varnish 5.x.

Submitted by:	vanilla

 

14:53 mat 

Add a warning for people who set foo_DEFAULT in their make.conf or environment.

Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D8060

 

07:16 rene 

Unregister PHP 5.5, it expired on 2016-10-20

Submitted by:	rene
Reviewed by:	portmgr (mat)
Differential Revision:	https://reviews.freebsd.org/D8305

 

19:50 antoine 

Change the default version of python3 from 3.4 to 3.5
Thanks to Ruslan Makhmatkhanov for doing all the fixes

PR:		204519
With hat:	portmgr

 

18:15 rene 

Unregister databases/postgresql91 and mention postgresql96 as a valid version.

Submitted by:	myself
Reviewed by:	mat
Differential Revision:	https://reviews.freebsd.org/D8123

 

19:23 tijl 

- Replace Mk/bsd.linux-apps.mk and Mk/bsd.linux-rpm.mk with
  Mk/Uses/linux.mk.
- Replace USE_LINUX=yes with USES+=linux and USE_LINUX=(.*) with
  USES+=linux:\1 in all ports.
- Replace USE_LINUX_APPS with USE_LINUX in all ports.
- Use INSTALL_SCRIPT instead of INSTALL_PROGRAM to install scripts in some
  ports.
- When USE_LINUX_RPM is defined, simplify the way DISTFILES and EXTRACT_ONLY
  are defined.
- Remove BRANDELF_DIRS and BRANDELF_FILES handling.  In the very rare cases
  that it is still necessary ports can run ${BRANDELF} from post-patch.
- Remove AUTOMATIC_PLIST handling.  Only one port used it.
- Fix Linux MASTER_SITES.
- Replace OVERRIDE_LINUX_BASE_PORT and OVERRIDE_LINUX_NONBASE_PORTS with
  default versions framework.
- bsd.port.mk:
  - Move Linux related bits to Uses/linux.mk, except USE_LINUX_PREFIX.
  - Put USE_LINUX_PREFIX handling after USES processing.
  - Define DOCSDIR, DATADIR, etc. after handling USE_LINUX_PREFIX so it can
    give these variables a different default value.
  - When a package needs to run Linux ldconfig check before installation if
    Linux support is enabled.
- emulators/linux_base-*:
  - Use USES=linux and remove duplication.
  - Remove files/lp.  FreeBSD or CUPS lp(1) should work.
  - Remove files/yp.conf.  No longer seems to be used.
  - Remove pkg-deinstall and move pkg-install into pkg-plist.
  - Update pkg-descr and pkg-message.
  - Fix handling of ldconfig cache in pkg-plist.
- devel/fb-adb: Use a Linux shell to run a Linux script but patch the script
  to use FreeBSD mkdir so mkdir -p $path creates $path and not
  /compat/linux/$path.

PR:		211645
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

17:45 matthew 

Delete the now expired postgresql90 ports.  Upstream support for
postgresql-9.0.x was declared EoL in September 2015.

Summary:
Remove 9.0 from the list of postgresql versions available in ports

Disconnect postgresql90 ports from the build

Remove postgresql90-pgtcl port

Remove postgresql90-client port

Move the master postgreslXY-plperl makefile to postgresql95-plperl/Makefile.

Adjust include lines in other postgresqlXY-plperl ports

Delete postgresql90-plperl

Move the master postgreslXY-plpython/{Makefile,pkg-descr} to
postgresl95-plpython/{Makefile,pkg-descr}

Adjust all other postgresqlXY-plpython/Makefile to include the new master

Remove postgresql90-server

Reviewers: jgh, girgen, #portmgr, O5 Ports Framework, bapt, crees

Reviewed By: #portmgr, O5 Ports Framework, bapt, crees

Subscribers: mat

Differential Revision: https://reviews.freebsd.org/D6898

 

10:19 mat 

Make it possible to have bsd.default-versions.mk included before any
other bsd.*.mk file.

Restore the way ftp/curl was working before.

With hat:	portmgr
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D6921

 

12:43 mat 

Typo.

Reported by:	Vladimir Krstulja
Sponsored by:	Absolight

 

22:35 mat 

Fix warning messages.

Sponsored by:	Absolight

 

13:22 mat 

Add DEFAULT_VERSIONS=ssl=XXX

Move the openssl detection routine to bsd.default-version.mk.
Add warnings telling people to not use WITH_OPENSSL_PORT or
WITH_OPENSSL_BASE.

To ease maintainability, change the way the different ssl libraries
version numbers are checked.

PR:		210149
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	The FreeBSD Foundation, Absolight
Differential Revision:	https://reviews.freebsd.org/D6577

 

13:16 mat 

Fix WITH_BDB_VER support, and switch to DEFAULT_VERSIONS.

PR:		209183
Reported by:	peter
Sponsored by:	Absolight

 

13:34 mat 

Try to be more helpful to our users, and keep all the possible versions
close to their default value in Mk/bsd.default-versions.mk.

Sponsored by:	Absolight

 

22:20 swills 

Switch default Ruby version from 2.1 to 2.2

PR:		206852

 

15:47 tijl 

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

23:29 marino 

FPC ecosystem: Upgrade version 2.6.4 => 3.0.0

This is the first major release of FreePascal in nearly four years.
There are a ton of new features, way more to list here. see:
http://wiki.freepascal.org/FPC_New_Features_3.0

Several new unit ports were added, some were contracted.  Most of
those were absorbed into the main FPC packages, but two units are
no longer supported: sndfile and matroshka.

All 99 remaining ports (including Lazarus ports) were build tested
on FreeBSD i386 and amd64 Release 10.2

 

20:26 bdrewery 

Rework change in r399791 for default perl to not execute it on 'make clean'
if perl is not installed.

With hat:	portmgr

 

20:53 bdrewery 

Avoid redundantly looking up perl version when looking up dependencies or in
sub-makes.

With hat:	portmgr

 

12:19 mat 

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

 

01:44 hrs 

Remove minor version numbers.

Suggested by:	mat

 

21:07 hrs 

Allow support of minor version number in GHOSTSCRIPT_DEFAULT since
there are two packages for Ghostscript 9.x, 9.06 and 9.16.

 

20:53 kwm 

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

 

10:20 mat 

Change the default Perl to 5.20.

PR:		200134
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

 

03:04 swills 

- Switch default version of Ruby to 2.0

PR:		196632

 

13:56 ale 

Switch default PHP version to 5.6.x.

- Update PHP 5.4 to 5.4.38 release
- Update PHP 5.5 to 5.5.22 release
- Update PHP 5.6 to 5.6.6 release

PR:		195604
Approved by:	portmgr

 

13:45 ale 

Switch default MySQL version to 5.6.

PR:		195604
Approved by:	portmgr

 

00:03 gerald 

Move LANG_GCC_IS from bsd.gcc.mk to bsd.default-versions.mk and use
this and GCC_DEFAULT instead of hard-coding the version of GCC used
by lang/gcc in Uses/fortran.mk.

Approved by:	portmgr (antoine)

 

23:15 demon 

Switch default python3 version from 3.3 to 3.4.
Bump PORTREVISIONs for the affected ports.

Exp-run by:	antoine

 

09:57 marino 

Change PostgreSQL default version from 9.2 to 9.3

An exp-run has been performed on this default version change, and both
pgsql and portmgr are aware of this change.  Note that PR originally
made the jump from 9.0 to 9.3, but a conservative change to 9.2 was
done in May instead.

PR:	187286

 

13:08 mat 

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

 

01:08 swills 

Switch default Ruby to 2.0

 

19:09 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

This entails updating the lang/gcc port as well as changing the default
in Mk/bsd.default-versions.mk, and it replaces the CONFLICT between the
lang/gcc and lang/gcc47 ports by lang/gcc48.

GCC now uses C++ as its implementation language and performs more
aggressive loop analysis which can be disabled via the
-fno-aggressive-loop-optimizations command-line option.

Compilation of extremely large functions has been signficantly improved,
as have interprocedural optimizations.

A new optimization level -Og has been introduced.  It addresses the need
for fast compilation and a superior debugging experience while providing
a reasonable level of run-time performance.  This should be better
suitable for development than the default -O0.

A new local register allocator (LRA) has been implemented, which replaces
the 26 year old reload pass and improves generated code quality. For now
it is active on the x86 and x86-64 targets.

AddressSanitizer, a fast memory error detector, has been added and can be
enabled via -fsanitize=address.

Each diagnostic emitted now includes the original source line and a caret
indicating the column.

The new option -Wpedantic is an alias for -pedantic, which is now deprecated.

The C++ frontend and associated run-time library libstdc++ have gained
support for many additional C++11 features.  As with previous releases
the Fortrand frontend has seen many improvements as well.

Support for the AArch64 has been added, and there are many improvements
to the x86/x86-64 backend and others.

See http://gcc.gnu.org/gcc-4.8/changes.html for an extense list of changes;
http://gcc.gnu.org/gcc-4.8/porting_to.html for information on how to port
to that new version.

PR:		192025
Tested by:	antoine (-exp runs)

 

15:51 ohauer 

- set www/apache24 as the default apache version

requested by bz@ on ports@

 

18:29 antoine 

Revert r356123
This change was not exp-ran and if breaks a few ports because the python3
metaport and bsd.python.mk do not handle python34 well for now

Discussed with:	mva
With hat:	portmgr

 

14:03 demon 

Python 3.4 is a latest version of python-3 branch, so use it.

 

20:45 mat 

Change postgresql's default version to 9.2.

Requested by:	so many people
Exp-run by:	antoine
Sponsored by:	Absolight

 

20:46 bapt 

Switch firebird to use DEFAULT_VERSIONS macro to set the default
While here drop support for firebird 2.0

 

09:45 bapt 

Convert all :U to :tu and :L to :tl

Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)

bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore

Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier

With hat:	portmgr

 

03:32 acm 

- Update to 2.6.4

 

20:41 gerald 

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

This adds powerpc64 as a supported architecture (and removes ia64,
though it can be supported by manually installing lang/gcc48).

New binaries %%GNU_HOST%%-gcc-ar47, %%GNU_HOST%%-gcc-nm47, and
%%GNU_HOST%%-gcc-ranlib47 are provided to support link-time
optimization (LTO) which scales significantly better.

And it adds support for indirect functions (IFUNCS), experimental
support for transactional memory in the compiler as well as a supporting
run-time library called libitm, a new string length optimization pass,
and support for atomic operations specifying the C++11/C11 memory model.

Version 3.1 of the OpenMP specification is now supported for the C,
C++, and Fortran compilers.

GCC accepts the options -std=c11 and -std=gnu11 for the C11 revision
of the ISO C standard which inlcude support for unicode strings,
nonreturning functions (_Noreturn and <stdnoreturn.h>), alignment
support (_Alignas, _Alignof, max_align_t, <stdalign.h>), and a
__builtin_complex built-in function.

The C++ frontend now accepts the -std=c++11, -std=gnu++11, and
-Wc++11-compat options and implements many C++11 features of the
language including extended friends syntax, explicit override
control, non-static data member initializers, user-defined literals,
alias declarations, delegating constructors, atomic classes, and more.

The C++ standard library and Fortran frontend have received many
improvements.  See http://gcc.gnu.org/gcc-4.7/changes.html for an
extense list of changes; http://gcc.gnu.org/gcc-4.7/porting_to.html
for information on how to port to that new version.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

 

00:32 gerald 

Reword the documentation at the top of this file.

Sort the FPC_DEFAULT and GCC_DEFAULT entries.

 

22:15 gerald 

Replace all uses of GCC_DEFAULT_VERSION by GCC_DEFAULT, remove the
definition of the former from Mk/bsd.gcc.mk and add the latter --
still set to 4.6 -- to Mk/bsd.default-versions.mk.

Include Mk/bsd.default-versions.mk from Mk/bsd.gcc.mk to tie the
two together.

 

17:12 mat 

Use default-versions.mk for Apache, PHP, MySQL And PostgreSQL.

Submitted by:	Allan Jude
Reviewed by:	bdrewery, ohauer (apache), mat
With hat:	portmgr

 

21:16 crees 

Strip postgresql code out of bsd.database.mk, and introduce USES=pgsql.

New syntax:

# Depend on postgresql-client
USES=	pgsql

# Depend on postgresql-client at least 9.2
USES=	pgsql:9.2+

#Depend on postgresql-server at least 9.0
USES=		pgsql:9.0+
WANT_PGSQL=	server

Postgresql now supports DEFAULT_VERSIONS, and please note that the
version syntax now includes dots(!); i.e. before it was 90, now 9.0

Reviewed by:	ade, silence from pgsql@

 

08:25 bapt 

Add a USES=lua (WIP) that only supports lua 5.2
Goal is to slowly port any lua software to lua 5.2 and then remove lua 5.1 along
with bsd.lua.mk
Make version flexible and settable via DEFAULT_VERSIONS to prepare the futur
days of lua

 

10:26 mat 

Change default perl to lang/perl5.16

PR:		ports/182550
Submitted by:	mat
Approved by:	bdrewery (exp-run)

 

17:17 bdrewery 

- Fix spelling in comment

Submitted by:	des
With hat:	portmgr

 

09:25 mva 

The default versions of lang/python* have been changed to support the
new DEFAULT_VERSIONS variable.

PYTHON_DEFAULT_VERSION, PYTHON2_DEFAULT_VERSION and
PYTHON3_DEFAULT_VERSION are deprecated. If you have set them in your
make.conf, you should change them something like

DEFAULT_VERSIONS=python=2.7 python2=2.7 python3=3.3

 

13:13 sunpoet 

- Fix typo

 

09:49 gahr 

- Implement USES+=tcl and USES+=tk
- Use bsd.default-versions.mk to specify the default Tcl/Tk version (8.6)
- Add warnings about the now deprecated use of USE_TCL, USE_TK, ...

  Notes:

  * USES+=tcl and USES+=tk take the following optional arguments

    - either a version in the form of XY or XY+, or 'wrapper' to depend on
      lang/tcl-wrapper or x11-toolkits/tk-wrapper

    - either 'build' (bring in build depend) or 'run' (bring in run depend)

  * it is an error to specify both 'tcl' and 'tk' in USES.

  * The functionality currently implemented via INVALID_TCL_VER and
    INVALID_TK_VER is not yet available.

Approved by:	bapt (portmgr)

 

08:16 bapt 

Introduce the one-true-way to handle multi version ports

This defines a new macros for end users!
DEFAULT_VERSIONS.
This macros is used to end-users to define what version they want to be
the default version for the whole ports tree (for ports allowing that)

Syntax is the following:
DEFAULT_VERSIONS=	perl5=5.18 ruby=2.0

Swith bsd.ruby.mk to use it[1], switch Uses/perl5.mk to use it[2]

If you are maintaining settable multi version port, please change it so
it uses DEFAULT_VERSIONS.

Reviewed by:	ruby (swills) [1], perl (az) [2]
Approved by:	ruby (swills) [1], perl (az) [2]