Remove # $FreeBSD$ from Makefiles.

Add USES=xorg USES=gl, ports categories x

Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

- Pass maintainership to submitter
- While here, minor cleanup
  - Clarify LICENSE
  - Add LICENSE_FILE
  - Remove unneeded flags
  - Don't needlessly and erroneously patch wish path when TCL is disabled and
${WISH} is not defined
  - Silence mkdir

PR:		209705
Submitted by:	guru@unixarea.de

- Fix trailing whitespace in pkg-descrs, categories [p-x]*

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

- Do not require a particular version of Tk - any will do [1]
- While at it, modernize OPTIONS

PR:		194868
Submitted by:	wbparsons@alum.mit.edu

Hand back my ports to the pool.

Ports require time and TLC which I no longer have.

lang/guile:
- Add USES=libtool and bump dependent ports
- Replace Makefile.* patches with USES=pathfix
- Replace config.h.in patch with USE_AUTOTOOLS=autoheader
- Avoid automake by touching Makefile.in

Approved by:	portmgr (implicit, bump unstaged port)

Fix some non default LIB_DEPENDS

With hat:	portmgr

Update to 1.8.6

Unquiet my ports to make debugging easier.

- Convert to staging

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11)

Remove now excess verbiage.

Reviewed by:	bapt

Prefer the more common option 'TCL' for scripting support and use the global
description

Update to 1.8.5

	- Change master sites
	- Add license
	- Trim pkg-descr
	- Update WWW

Submitted by:	nemysis <nemysis@gmx.ch>
Feature safe:	yes

Clean up my ports (and a couple of ports@ owned ones):

- Fix COMMENT
- Add MAKE_JOBS_SAFE where appropriate
- Change ordering of LICENSE lines
- Fix new header format
- Etc.

Reviewed by:	drogoh (on irc)

Trim the headers in the ports I maintain.

Upgrade to OptionsNG

Remove gratitutous version number from LIB_DEPENDS where not required.

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- change the email address I use to maintain ports

Approved by:    bapt (mentor)

- change the email address I use to maintain ports

Approved by:    bapt (mentor)

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

- Chase guile shared lib bump
- Add an entry to UPDATING

- Get Rid MD5 support

- Update maintainer's email address

PR:             ports/148497
Submitted by:   Eitan Adler <eitanadlerlist@gmail.com> (maintainer)

- Pass maintainership to Eitan Adler.

Submitted by:   Eitan Adler <EitanAdlerList@gmail.com> (via private mail)
Feature safe:   yes

- Update 1.8.3.

- Chase lang/guile shlib bump

- Chase lang/guile share library version bump (.18 -> .19)
- Bump PORTREVISION

PR:             ports/125435

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

Chase libguile shared lib version.

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Change my mail address to araujo@.

Approved by:    stas (mentor)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 1.8.2

PR:             111879
Submitted by:   miwi
Approved by:    maintainer

Update to 1.8.1

PR:             ports/111610
Submitted by:   Marcelo Araujo (araujo@bsdmail.org) (maintainer)

- update version to 1.8.0
- pass maintainership to submitter

PR:             ports/108551
Submitted by:   Marcelo Araujo

- Update to 1.7.4

PR:             ports/107637
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Update to 1.7.3

PR:             98121
Submitted by:   Martin Wilke <freebsd_AT_unixfreunde dot de>

Remove USE_REINPLACE from categories starting with X

- Add SHA256

- Update to 1.7.2 [1]
- Refactor pkg-plist as PLIST_{FILES|DIRS}
- Install the example regardless of NOPORTDOCS

PR:             ports/80772 [1]
Submitted by:   KATO Tsuguru <tkato432@yahoo.com> [1]

- Convert to OPTIONS

PR:             ports/70717
Submitted by:   Ying-Chieh Chen <yinjieh@csie.nctu.edu.tw>

SIZEify.

- Update to version 1.7.1

PR:             61251
Submitted by:   Ports Fury

upgrade to 1.7.0

Update to version 1.6.5.

PR:             58383
Submitted by:   Ports Fury

upgrade to 1.6.4

De-pkg-comment.

Use CONFIGURE_TARGET instead of CONFIGURE_ENV.

PR:             ports/45450
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Upgrade to 1.6.3.

Upgrade to 1.6.2.

Upgrade to 1.6.0.

Changed MD5 sum. Developer has just changed some lines in configure.in and
rerunned auto{configure|make|...}. No functionality has changed, so no need to
bump PORTREVISION.

PR:             44210
Submitted by:   Volker Stolz <vs@foldr.org>

- Support CFLAGS/CXXFLAGS properly
- ECHO -> ECHO_MSG

PR:             42894
Submitted by:   Ports Fury

Set maintainership to ports@.

Change MAINTAINER to my FreeBSD address.

Approved by:    dwcjr (mentor)

Fix script environment when WITH_GUI is defined.

PR:             38320
Submitted by:   parv <parv@pair.com>, maintainer

Upgrade to 1.5.5.

PR:             ports/38239
Submitted by:   maintainer

Update to 1.5.4

PR:             38066
Submitted by:   maintainer

Update to 1.5.2

PR:             37815
Submitted by:   maintainer

Update to 1.5.1

PR:             37499
Submitted by:   maintainer

Update to 1.5.0

PR:             36534
Submitted by:   maintainer

* added knob WITH_GUI
* added scripts/post-install
* bumped PORTREVISION, because xbindkeys_show does not work prior to
  these changes

PR:             36366
Submitted by:   maintainer

Pass maintainership to the submitter.

PR:             36348
Submitted by:   Oliver Braun <obraun@informatik.unibw-muenchen.de>

Update to 1.4.1    

upgrade to 1.4.0    

Update to 1.3.0    

upgrade to 1.2.2    

Update to 1.2.1    

upgrade to 1.2.0    

Fix typo s/WITH_XLIB/USE_XLIB/    

add xbindkeys 1.0.1   Allows you to launch shell commands under X with your
keyboard