x11-wm: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam Weinberger
  *  Alejandro Pulver <alepulver@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Anton Tornqvist <antont@inbox.lv>
  *  Aragon Gouveia <aragon@phat.za.net>
  *  Babak Farrokhi <babak@farrokhi.net>
  *  Brett Taylor <brett@peloton.physics.montana.edu>
  *  Brian Handy <handy@physics.montana.edu>
  *  Bruce A. Mah <bmah@ca.sandia.gov>

x11-wm/pekwm: Update to 0.2.0

PR:		259674
Reported by:	Natacha Porté (maintainer)

Remove # $FreeBSD$ from Makefiles.

Fix spelling mistakes, typos, poor wording, hyphenation, jargonisms,
contractions, "<portname> is ..." cases, missing Oxford commas, and
other miscellaneous style bugs in the COMMENT line.

x11-wm/pekwm - update WWW

Worth nothing is that the .org page has been taken over by some dubious hoster
claiming pekwm has VPS support!? and links to hostingsonar.com (broken), this
will be replaced with the .se domain pekwm.se. The official pekwm page
currently is the Github page https://github.com/pekdon/pekwm.

Information taken from https://pekdon.github.io/posts/pekwm-development-reboot/

PR:	254443
Reported by:	Herbert J. Skuhra <herbert@mailbox.org>
Approved by:	Natacha Porte <natbsd@instinctive.eu> (maintainer)

x11-wm/pekwm: unexpire, change MASTER_SITE

Also, add USES=autoreconf and add missing USE_XORG=xinerama xrandr

PR:		245185
Submitted by:	lbartoletti
Approved by:	maintainer
MFH:		2020Q2

Deprecate ports broken for more than 6 months

Add USES=xorg USES=gl, ports categories x

Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

Mark a few ports BROKEN (unfetchable)

x11-wm/pekwm: Unbreak with Clang 6

ActionHandler.cc:603:10: error: case value evaluates to 4294967291, which cannot
be
      narrowed to type 'int' [-Wc++11-narrowing]
    case WORKSPACE_UP:
         ^

http://beefy11.nyi.freebsd.org/data/head-i386-default/p474051_s336054/logs/pekwm-0.1.17_4,1.log

PR:		230889
Submitted by:	tobik
Approved by:	Natacha Porte <natbsd@instinctive.eu> (maintainer)

- Pass maintainership to submitter [1]
- While here, add LICENSE, switch to USES=localbase, other cosmetic fixes

PR:		211131 [1]
Submitted by:	natbsd@instinctive.eu [1]

- Fix trailing whitespace in pkg-descrs, categories [p-x]*

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

Convert to USES=jpeg

converters/libiconv:
- Remove const qualifier from iconv(3) to match POSIX:
  http://pubs.opengroup.org/onlinepubs/9699919799/functions/iconv.html
- Patch iconv.h to expose more GNU extensions when LIBICONV_PLUG is
  defined because the base system iconv supports these extensions too.

Add/remove patches to/from ports to call iconv with non-const arguments.

This breaks some ports on FreeBSD 10 because base system iconv.h still has
the const qualifier.  Fix this by letting USES=iconv add a build dependency
on converters/libiconv so ports can use its iconv.h (with LIBICONV_PLUG
defined) instead of the base system iconv.h.

This exposed some ports that link with libiconv when it is available instead
of using libc iconv.  In these cases one of the following changes has been

- Drop @dirrm* from and add empty directories to pkg-plists

Approved by:	portmgr blanket, kwm (for gnome@ ports)

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

- Turns out this is broken with iconv from base (renders empty chars,
  breaks bmpanel2, and also it fails to build when ports iconv is present),
  so force it to always use iconv from ports.
- Bump PORTREVISION.

Reported by:	Gary Perreault (via irc)

- Convert USE_BZIP2/XZ to USES

Approved by:	portmgr

Drop maintainership

Use stage
Convert USE_GMAKE to USES=gmake
Fix plist
Bump portrevision

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-wm)

- Make ports use the libc provided iconv implementation on 10-CURRENT
  after r254273
- Fix a bunch of ports to properly work after this
- Mark converters/libiconv as IGNORE for systems with iconv in libc

Reviewed by:	bapt
Approved by:	portmgr (bapt)
Discussed with:	bapt, bsam (who both contributed ideas and code)

Readd PORTEPOCH removed by mistake

Update to 0.1.17 [1]
Add a patch to prevent pekwm_screenshot.sh script to depend on bash

Submitted by:	Claes Nasten <me@pekdon.net> (upstream) [1]

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig and
  USE_GETTEXT=yes to USES=gettext while here

Convert my ports to use the new USES=pkgconfig

- Fix all cases of 'No newline at end of file' in ports tree

Approved by: portmgr (bapt)

- update to 0.1.16
- add a patch to fix complication with our old gcc 4.2.1

PR:		ports/174847
Submitted by:	"Herbert J. Skuhra" <h.skuhra@gmail.com>

- update to 0.1.15
- changes: https://www.pekwm.org/projects/pekwm/wikis/Release-0_1_15

- Use USE_PKGCONFIG macro
- Remove useless post-patch

- update png to 1.5.10

- update to 0.1.14

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- update to 0.1.13
- use bzip2 distfile

PR:             ports/158620
Submitted by:   David Demelier <demelier.david@gmail.com>

- Get Rid MD5 support

Change maintainer address to my new @FreeBSD.org

Approved by:    jadawin@ (co-mentor)

- Update to 0.1.12
- Pass maintainership to submitter.

PR:             ports/148466
Submitted by:   Bapt <baptiste.daroussin@gmail.com>

- fix build for png-1.4.1
PR:             145117

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Reset maintainer and remove old MASTER_SITES.

PR:             ports/137224
Submitted by:   Martin Tournoij <carpetsmoker@rwxrwxrwx.net> (maintainer)

- update to jpeg7
Tested by:      pav on pointyhat

- Update to 0.1.11

PR:             ports/135215
Submitted by:   Bapt <baptiste.daroussin@gmail.com>
Approved by:    maintainer timeout (two weeks)

- Update to 0.1.10

PR:             131043
Submitted by:   Henrik Friedrichsen <hrkfdn at gmail dot com>
Approved by:    Martin Tournoij <carpetsmoker at rwxrwxrwx dot net> (maintainer)

- Update to 0.1.9a

PR:             129823
Submitted by:   "Henrik Friedrichsen" <hrkfdn@gmail.com>
Approved by:    maintainer timeout

- Update to 0.1.8

PR:             128767
Submitted by:   Henrik Friedrichsen <hrkfrd@googlemail.com>
Approved by:    maintainer

o Update to 0.1.7
o Update maintainer email address

Version 0.1.7 contains both bug fixes and new features compared to
0.1.6, most notably:

o UTF-8 support, finally non ASCII characters should render ok.
o RandR support, multi-screen configuration is now detected and should
be handled correctly.
o Viewport support removed, it was buggy and not used by many.

For a somewhat more complete list of changes see:
http://www.pekwm.org/projects/pekwm/wikis/Release-0_1_7

PR:             126318
Submitted by:   Martin Tournoij <carpetsmoker@xs4all.nl> (maintainer)

- Update to 0.1.6.
- Make fetchable again.
- Update pkg-desc.

PR:             ports/123126, ports/117900
Submitted by:   Martin Tournoij <carpetsmoker@xs4all.nl>, Henrik Friedrichsen
<henrik@cheat-project.com>
Approved by:    gabor (mentor), Martin Tournoij <carpetsmoker@xs4all.nl>
(maintainer)

Reset maintainer:
<xcas@cox.net>: host mx.west.cox.net[68.6.19.3] said: 550 5.1.1 <xcas@cox.net>
    recipient rejected (in reply to RCPT TO command)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 0.1.5 (20060417)

PR:             ports/96073
Submitted by:   Greg J. <xcas@cox.net> (maintainer)

Update to 0.1.4 final (20060222).

PR:             93734
Submitted by:   Greg J. (maintainer)

- Update to 20060216 snapshot
- Remove imlib2 & pcre dependencies
- Add jpeg, png & xpm dependencies
- Use autotools for this version

PR:             93463
Submitted by:   Greg J. <xcas@cox.net> (maintainer)

SHA256ify

Approved by: krion@

- Update to 20050515.

PR:             ports/81345
Submitted by:   maintainer

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Bump PORTREVISION after latest commit.

Noticed by:     Adam McDougall <mcdouga9@egr.msu.edu>

- Fix ${FILESDIR}/patch-aa which made theme selection impossible.

PR:             ports/78798
Submitted by:   Greg J. <xcas@cox.net> (maintainer)
Noticed by:     Adam McDougall <mcdouga9@egr.msu.edu>

- Fix Imlib2 dependency.

PR:             ports/78584
Submitted by:   Greg J. <xcas@cox.net> (maintainer)
Approved by:    pav (mentor)

- Update to 20050227 snapshot.
- Add site to MASTER_SITES.

PR:             ports/78328
Submitted by:   Greg J. <xcas@cox.net> (maintainer)
Approved by:    pav (mentor)

- Update to 20050209-5

PR:             ports/78092
Submitted by:   Greg J. <xcas@cox.net> (maintainer)

- Update to 20040828 CVS snapshot
- Assign maintainership to submitter

PR:             ports/71557
Submitted by:   "Greg J."

- Update MASTER_SITES and WWW: line

PR:             ports/65540
Submitted by:   Ports Fury

- Reset maintainer to ports@FreeBSD.org, thank you Anders for
  your work!

PR:             ports/64665
Submitted by:   Anders Andersson <anders@andersa.net>

Add size data, approved by maintainers.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

Make portlint(1) happy by changing strip to ${STRIP_CMD}

Submitted by:   Oleg Karachevtsev <ok@etrust.ru>
PR:             56998

Maintain-update of x11-wm/pekwm

PR:             53509
Submitted by:   Anders Andersson <anders@andersa.net> (maintainer)

x11-wm/pekwm to latest version: 0.1.2 --> 0.1.3

PR:             53452
Submitted by:   herbert@bugat.at
Reviewed by:    Anders Andersson <anders@andersa.net> <anders@andersa.net>
(maintainer)

Chase new website in MASTER_SITES and WWW.

PR:             50192
Submitted by:   Anders Andersson <anders@andersa.net> (maintainer)

Use pre-everything:: instead of pre-everything: to avoid conflict with
targets in bsd.port.mk

- use COMMENT
- change MAINTAINER's email address

PR:             48469
Submitted by:   Anders Andersson <anders@hack.org> <anders@andersa.net>

Coalesce two pre-everything targets into one.

Update to 0.1.2(change new config file format).

PR:             ports/45539
Submitted by:   Anders Andersson <anders@hack.org> (maintainer)

Add pekwm, it's a windowmanager based on aewm++.

PR:             ports/44815
Submitted by:   Anders Andersson <anders@hack.org>