2012-10-20 x11-toolkits/paragui: No more upstream, no ports depending on it

Feature safe:	yes

Deprecate a bunch of abandonned and not depend on toolkits

- update png to 1.5.10

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Kick MD5 support

Sync to new bsd.autotools.mk

- Update graphics/sdl_ttf to version 2.0.10
- Bump portrevisions for all ports depending on graphics/sdl_ttf
- Update Mk/bsd.sdl.mk for the new shared library version.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Update devel/sdl12 to version 1.2.14.
- Update audio/sdl_mixer to version 1.2.11.
- Update graphics/sdl_gfx to version 2.0.20.
- Update graphics/sdl_image to version 1.2.10.
- Bump portrevisions for all ports depending on audio/sdl_mixer and
  graphics/sdl_image.
- Update Mk/bsd.sdl.mk accordingly for the new shared lib versions.

PR:             ports/142147 ports/142248 ports/142249
Approved by:    miwi (mentor implicit)

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Remove references to my mirror, which will be decommissioned shortly;
fall back to FreeBSD mirrors in case the port has no others.

update devel/physfs to 2.0.0
bump PORTREVISION on the affected ports

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

- Chase devel/sdl12 shlib version bump

Fix build on 64 bit platforms

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Return to ports@.
- Add PORTSCOUT variable.

 - Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
   structure (i.e. include/SDL for includes and sdl-config for configuration
   binary)
 - Update graphics/sdl_ttf to version 2.0.8
 - Update graphics/sdl_image to version 1.2.5
 - Update audio/sdl_mixer to version 1.2.7
 - Update net/sdl_net to version 1.2.6
 - Update Mk/bsd.sdl.mk accordingly
 - Fix dependent ports to fit the new directory structure and avoid several
   API breakages
 - Bump up portrevisions for all dependent ports to allow them to be upgraded
   by portupgrade/portmaster etc tools

Approved by:    kris (portmgr), sem (mentor)

Register CONFLICTS with paragui-devel

- Fix build on !i386 [1]
- Use DATADIR macro in pkg-plist

PR:             ports/99233
Submitted by:   alepulver [1]
Approved by:    ahze (mentor)

Switch to my @FreeBSD.org address.

Approved by:    ahze (mentor)

- Fix MASTER_SITES -> make fetchable
- portlint(1)
- Take maintainership

PR:             ports/97017
Submitted by:   Shaun Amott

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Chase shlib bump of libexpat.

- Add SHA256

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

update physfs to 1.0.1
adjust LIB_DEPENDS from all affected ports and bump PORTREVISION there

change the libtool version to use from 1.3 to 1.5

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

BROKEN on amd64: Does not compile

SIZEify.

Chase library bump of libSDL-1.1 for all ports which were depending
on sdl12-1.2.5

o Bump $LIB_DEPENDS line to chase expat's shlib version.
o Bump $PORTREVISION.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Update physfs to 1.0.0

Let ports use the USE_SDL macro.

Update website name.

Chase up new MASTER_SITE_SAVANNAH.

PR:             ports/56970
Submitted by:   Jean-Yves Lefort <jylefort@brutele.be>

Mark paragui broken for everything but i386 and amd64
portlint
Update pkg-descr

PR:             57332
Submitted by:   Mark Linimon <linimon@lonesome.com>

USE_SDL while I am here

physfslibrary got updated from .8 to .9 - sync DEPENDS

Add PREFIX as include and lib path during configure

update paragui to 1.0.4

De-pkg-comment.

Update version number of SDL shared library.

Bump PORTREVISION and expat shlib.

Bump portrevision (textproc/expat2 shlib bump).

Add USE_REINPLACE where appropriate.

Update to 1.0.2

PR:             ports/39485
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Chase increase of libSDL version number.

Update to 1.0.1

PR:             36896
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update to 1.0.0    

portlint:   - begin with a capital   - don't end with '.'   - remove port name  
- don't exceed 70 characters    

upgrade to 0.7.2   drop maintainership    

USE_LIBTOOL implies GNU_CONFIGURE, so remove the latter where appropriate.    

Update version number of sdl_ttf shared library.    

upgrade to 0.7.0   - remove docs and man pages   - api change    

Move:   devel/sdl --> devel/sdl10   devel/sdl-devel --> devel/sdl12    

add paragui   ParaGUI is a cross-platform high-level application framework and
GUI library