x11-toolkits/p5-Tk-TableMatrix: Update to 1.29

- Add LICENSE

Changes:	https://metacpan.org/dist/Tk-TableMatrix/changes

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

x11-toolkits: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  1wardd@airmail.net
  *  Alexander Kabaev <ak03@gte.com>
  *  Alexander Novitsky <alecn2002@yandex.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Brian Buchanan <brian@CSUA.Berkeley.EDU>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>

Remove # $FreeBSD$ from Makefiles.

Update to 1.26

- Use USES=dos2unix to convert CRLF to LF
- Strip shared library
- Do not silence installation message

Changes:	https://metacpan.org/changes/distribution/Tk-TableMatrix

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.

Approved by:	portmgr (adamw)

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

- Mark MAKE_JOBS_UNSAFE, fails sporadically with parallel build:

chmod: libpTk.a: No such file or directory

or

ERROR: Cannot copy 'version.h' to '../blib/arch/Tk/pTk/version.h': Permission
denied

Approved by:	portmgr blanket

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

Remove SITE_ARCH/auto/Tk/pTk/extralibs.ld, it's empty, and conflicts.

Sponsored by:	Absolight

Remove all the bootstrap files (.bs) from the plists.

Starting with perl 5.20, they're not installed any more if empty,
and on FreeBSD, they're (always ?) empty.

PR:		190681
Submitted by:	mat
Exp-Run by:	antoine
Sponsored by:	Absolight

- support STAGEDIR

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

- Convert to new perl framework
- Trim Makefile header
- Remove MAKE_JOBS_SAFE=yes, it's the default.

- Remove SITE_PERL from *_DEPENDS

- update png to 1.5.10

At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.

Explicit duplication > := > = and this just moves ports one step to the left

Approved by:    portmgr

- Change PERL_CONFIGURE to "yes" for all values less than or equal to 5.8.0+

With hat:       perl

- Cleaning MD5 in perl@'s ports

Approved by:    erwin@ (portmgr)

- %%SITE_PERL%%/auto and %%SITE_PERL%%/%%PERL_ARCH%%/auto
  are part of lang/perl5* pkg-plist
- Bump PORTREVISIONs

With Hat:   perl@

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- pass p5-Tk ports@ ports to perl

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.

PR:             ports/122674
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by:    araujo (myself)
Approved by:    portmgr (pav)

Welcome bsd.perl.mk.  Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.

Work done by:   gabor
Sponsored by:   Google Summer of Code 2007
Hat:            portmgr

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Update to 1.23

- Respect X11BASE

Reported by:    pointyhat

- Update to 1.22 [1]
- Require perl from ports

PR:             98557 [1]
Submitted by:   Rong-En Fan <rafan@infor.org>

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

- Add SHA256

- Update to 1.2

Drop maintainership

Remove BROKEN: update to version 1.1

PR:             62521 [1]
Reminded by:    Neil Hoggarth <neil@hoggarth.me.uk> [1]

BROKEN on 5.x: does not compile

USE_SIZEify

utilize SITE_PERL

PR:             58166
Submitted by:   Cheng-Lung Sung <clsung@dragon2.net>

De-pkg-comment

o New port p5-Tk-TableMatrix version 0.9: Table/matrix extension
  to perl/tk for displaying table formatted data
o First port to use PORTCOMMENT variable (let the races begin)