| non port: x11-toolkits/SoXt/Makefile |
|
SVNWeb
|
Number of commits found: 48 |
|
Sat, 19 Aug 2023
|
[ 02:52 Muhammad Moinur Rahman (bofh)  ]    9740b32
x11-toolkits/SoXt: Mark BROKEN on 14
Fails to build with:
error: couldn't compile and link with Motif
Sponsored by: The FreeBSD Foundation
|
|
Tue, 25 Apr 2023
|
[ 15:17 Christian Weisgerber (naddy) ] feb1fa3 (Only the first 10 of 1613 ports in this commit are shown above.  )
audio/opus: bump consumers after update to 1.4
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:23 Tobias C. Berner (tcberner) ] 71b6a9f (Only the first 10 of 134 ports in this commit are shown above. )
x11-toolkits: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* 1wardd@airmail.net
* Alexander Kabaev <ak03@gte.com>
* Alexander Novitsky <alecn2002@yandex.ru>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Andreas Kohn <andreas@syndrom23.de>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Anton Berezin <tobez@FreeBSD.org>
* Brian Buchanan <brian@CSUA.Berkeley.EDU>
* Cezary Morga <cm@therek.net>
* Cheng-Lung Sung <clsung@FreeBSD.org>
* Danilo Egea Gondolfo <danilo@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 22 Jun 2021
|
[ 18:53 Kevin Bowling (kbowling) ] da3162c (Only the first 10 of 914 ports in this commit are shown above. )
graphics/mesa-libs: Bump reverse deps for libglvnd
Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.
PR: 246767
Reviewed by: manu, bapt
Approved by: x11
Differential Revision: https://reviews.freebsd.org/D30824
|
|
Tue, 13 Apr 2021
|
[ 16:18 Dmitry Marakasov (amdmi3) ] 1d859a4
x11-toolkits/SoXt: Add LICENSE, clarify USE_GL
Approved by: portgmr blanket
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Thu, 7 Nov 2019
|
[ 18:36 zeising ]   (Only the first 10 of 432 ports in this commit are shown above. )
Add USES=xorg USES=gl, ports categories x
Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
|
|
Tue, 23 May 2017
|
[ 05:03 rezny ] (Only the first 10 of 711 ports in this commit are shown above. )
Revision bump of all ports with USE_GL after consolidation of mesa-libs
Approved by: swills (mentor)
Differential Revision: https://reviews.freebsd.org/D10845
|
|
Fri, 1 Apr 2016
|
[ 14:33 mat ] (Only the first 10 of 2136 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 24 Dec 2014
|
[ 00:14 bofh ] (Only the first 10 of 432 ports in this commit are shown above. )
Change my non-FreeBSD MAINTAINER mail to bofh@
Approved by: bapt
|
|
Sat, 29 Nov 2014
|
[ 12:58 antoine ]
Allow building without /usr/bin/perl symlink
PR: ports/195494
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Wed, 6 Aug 2014
|
[ 21:44 marino ]
Update WWW and MASTER_SITES for four coin3d ports
* graphics/Coin
* graphics/simage
* x11-toolkits/soqt
* x11-toolkits/soXt
PR: 192442
Submitted by: Shane Ambler
Approved by: general blanket (1/4 ports maintained)
|
|
Mon, 23 Jun 2014
|
[ 00:57 amdmi3 ]
- Switch to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed
Approved by: portmgr blanket
|
[ 00:56 amdmi3 ]
- Drop .la files, no dependees require them
Approved by: portmgr blanket
|
|
Tue, 3 Jun 2014
|
[ 21:36 tijl ]
- Remove s/aout/elf/ patch. It is handled by USES=libtool.
- Remove reference to PTHREAD_LIBS.
|
|
Wed, 23 Apr 2014
|
[ 13:25 tijl ] (Only the first 10 of 462 ports in this commit are shown above. )
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 22 Apr 2014
|
[ 12:43 bapt ]
Support stage
Modernize
|
|
Fri, 20 Sep 2013
|
[ 23:57 bapt ] (Only the first 10 of 288 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)
|
|
Thu, 12 Sep 2013
|
[ 15:23 az ] (Only the first 10 of 19 ports in this commit are shown above. )
- convert to the new perl5 framework
- convert USE_GMAKE to Uses
Approved by: portmgr (bapt@, blanket)
|
|
Wed, 10 Jul 2013
|
[ 07:00 bapt ] (Only the first 10 of 31 ports in this commit are shown above. )
Convert from USE_MOTIF to USES=motif
While here:
- Trim headers
- Convert USE_GMAKE to USES=gmake
- Remove indefinite article from comment
|
|
Tue, 19 Mar 2013
|
[ 13:04 eadler ] (Only the first 10 of 218 ports in this commit are shown above. )
This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.
If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.
PR: ports/177081
Reviewed by: bapt
Approved by: portmgr (miwi)
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Fri, 2 Mar 2012
|
[ 12:29 makc ]
Update to 1.3.0
Pass maintainership to submitter
PR: ports/165531
Submitted by: Muhammad Moinur Rahman <5u623l20 at gmail.com>
|
|
Tue, 2 Aug 2011
|
[ 19:35 bapt ]
Fix master_site
|
|
Fri, 17 Jun 2011
|
[ 15:37 bapt ] (Only the first 10 of 24 ports in this commit are shown above. )
Mark broken some ports with unfetchable distfiles
|
|
Mon, 2 May 2011
|
[ 12:44 makc ] (Only the first 10 of 195 ports in this commit are shown above. )
Bump PORTREVISION after open-mofit update
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Sat, 7 Nov 2009
|
[ 19:01 sylvio ]
- BUMP PORTREVISION due of update of graphics/Coin
Approved by: itetcu (mentor)
|
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
|
Thu, 29 Jan 2009
|
[ 20:13 pav ]
- Fix build, needs Xi
Reported by: pointyhat
|
|
Fri, 23 Jan 2009
|
[ 09:58 beech ]
- Chase graphics/Coin shlib bump
- Bump portrevision
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
|
Fri, 28 Dec 2007
|
[ 19:44 lwhsu ]
bump PORTVERSION for shared library version changed of graphics/Coin
Reported by: erwin via pointyhat
|
|
Mon, 20 Aug 2007
|
[ 19:47 arved ]
Build requires perl.
Reported by: pointyhat
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Sat, 17 Mar 2007
|
[ 18:25 arved ]
Fix build after objformat removal
|
|
Tue, 15 Aug 2006
|
[ 01:13 clsung ] (Only the first 10 of 44 ports in this commit are shown above. )
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- x11-toolkits/ of ports@
PR: ports/101916
Submitted by: Gea-Suan Lin <gslin_AT_gslin dot org>
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Mon, 17 Oct 2005
|
[ 10:34 vs ]
Update to 1.2.2
|
|
Fri, 3 Jun 2005
|
[ 20:18 oliver ] (Only the first 10 of 67 ports in this commit are shown above. )
change the libtool version to use from 1.3 to 1.5
|
|
Mon, 25 Oct 2004
|
[ 13:39 edwin ] (Only the first 10 of 28 ports in this commit are shown above. )
Clean up time for email addresses MIA!
If you know new email addresses for the people involved, please send-pr it!
<mcsi@agava.com>: host relay.agava.net.ru[195.161.118.3] said: 550
<mcsi@agava.com>: User unknown in local recipient table (in reply to RCPT
TO command)
<woju@bbsmail.ntu.edu.tw> (expanded from <woju@bbsmail>): Host or domain name
not found. Name service error for name=bbsmail.ntu.edu.tw type=A: Host not
found
<esoha@attbi.com>: host gateway.attbi.com[204.127.198.6] said: 551 not our
customer (in reply to RCPT TO command)
<crow@nektor.hu>: host mail.kapu.hu[195.70.32.236] said: 550 unknown user (in(Only the first 15 lines of the commit message are shown above )
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Sun, 3 Aug 2003
|
[ 07:26 maho ]
an open source implementation of the SGI InventorXt library, which
Xis a GUI binding for using Open Inventor with Xt/Motif.
PR: 51351
Submitted by: Roland Jesse <roland.jesse@gmx.net>
|
Number of commits found: 48 |
As an Amazon Associate I earn from qualifying purchases.