non port: x11-fonts/libFS/Makefile |
Number of commits found: 25 |
Friday, 1 Sep 2023
|
11:47 Gleb Popov (arrowd)
x11/xtrans: Don't unlink X11 Unix sockets.
Without this change calling `Xorg -displayfd ..` would always make X to use
:0 as the DISPLAY. This was a showstopper for running parallel desktop sessions.
The leftover UDS' are cleaned up during system's boot by the /etc/rc.d/cleartmp
service.
Based on work of jbeich and Olivier Certner <olivier.freebsd@free.fr>.
PR: 253277
Approved by: manu
Sponsored by: Serenity Cybersecurity, LLC
Differential Revision: https://reviews.freebsd.org/D30557
3312d02 |
Wednesday, 7 Sep 2022
|
21:10 Stefan Eßer (se)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.
There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.
The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.
Approved by: portmgr (tcberner)
b7f0544 |
Wednesday, 7 Apr 2021
|
08:09 Mathieu Arnold (mat)
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
cf118cc |
Tuesday, 6 Apr 2021
|
14:31 Mathieu Arnold (mat)
Remove # $FreeBSD$ from Makefiles.
305f148 |
Sunday, 3 Nov 2019
|
21:56 zeising
Switch all ports to use USES=xorg-cat
Change all ports to use USES=xorg-cat instead of the old XORG_CAT
Add USES=xorg and USES=gl as needed to x11@ ports
|
Sunday, 16 Jun 2019
|
20:28 zeising
x11-fonts/libFS: Update to 1.0.8
Update x11-fonts/libFS to 1.0.8
This release contains a fixes for a bunch of sign comparision warnings,
and changes to the build system
add LICENSE and LICENSE_FILE
pet portlint a bit, move USES= earlier
use INSTALL_TARGET=install-strip to strip binaries and files
Changelog:
https://lists.x.org/archives/xorg-announce/2019-March/002970.html
Sponsored by: B3 Init
|
Tuesday, 11 Sep 2018
|
18:34 zeising
Change x11/xorgproto to become a build dep
Change x11/xorgproto to become a build time dependency when added to
USE_XORG. Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.
PR: 230909
Reviewed by: eadler
Approved by: portmgr (antoine)
Obtained
from: https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run: antoine
Differential Revision: https://reviews.freebsd.org/D16906
|
Tuesday, 31 Jul 2018
|
18:41 zeising
Switch to xorgproto instead of individual packages
Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto. This update
tracks that change.
* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
instead depend on xorgproto. Bump portrevision.
* Delete the old *proto packages, update MOVED.
PR: 230023
Submitted by: zeising
Approved by: portmgr (antoine)
exp-run by: antoine
|
Tuesday, 20 Oct 2015
|
13:59 kwm
Update libFS to 1.0.7.
Obtained from: Xorg devel repo
|
Saturday, 18 Apr 2015
|
15:34 kwm
Misc X.org port updates:
Update gccmakedep to 1.0.3.
Update imake to 1.0.7.
Update libpciaccess to 0.13.3.
Update libdrm to 2.4.60.
Update bitmap to 1.0.8.
Update fstobdf to 1.0.6.
Update iceauth to 1.0.7.
Update libXdmcp to 1.1.2.
Update libXp to 1.0.3.
Update libXvMC to 1.0.9.
Update libXxf86vm to 1.1.4.
Update libxshmfence to 1.2.
Update randrproto to 1.4.1.
Update rgb to 1.0.6.
Update sessreg to 1.1.0.
Update xcb-util-cursor to 0.1.2.
Update xedit to 1.2.2.
Update xkbcomp to 1.3.0.
Update xkeyboard-config to 2.14.
Update xproto to 7.0.27.
Update xf86-input-mouse to 1.9.1.
Update xf86-input-synaptics to 1.8.2.
Update xf86-video-i710 to 1.3.5.
Update xf86-video-mga to 1.6.4.
Update xf86-video-tdfx to 1.4.6.
Update xf86-video-vmware to 13.1.0.
Update bdftopcf to 1.0.5.
Update font-util to 1.3.1.
Update fslsfonts to 1.0.5.
Update mkfontscale to 1.1.2.
Update showfont to 1.0.5.
Update xfs to 1.1.4.
Update xfsinfo to 1.0.5.
Remove :keepla from USES=libtool for X libraries in bsd.xorg.mk, and bump
all affected ports.
PR: 199400
Obtained from: Xorg-devel repo
|
Sunday, 22 Mar 2015
|
11:11 robak
x11-fonts/libFS: add CPE information
- Maintainer's timeout (x11@FreeBSD.org)
PR: 197718
Submitted by: Shun <shun.fbsd.pr@dropcut.net>
|
Wednesday, 23 Apr 2014
|
13:25 tijl
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries. Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field. In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.
PR: ports/188759
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
|
Wednesday, 16 Apr 2014
|
18:28 zeising
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.
Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.
Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.
Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.
Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics
Thanks to: all testers, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/187602 [1]
Approved by: portmgr (bdrewery), core (jhb)
|
Tuesday, 24 Sep 2013
|
06:24 bapt
Remove NO_STAGE to ports natively stage ready shown by a FORCE_STAGE exp-run
Exp-run by: bdrewery
|
Friday, 20 Sep 2013
|
23:51 bapt
Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-fonts)
|
Tuesday, 4 Jun 2013
|
19:31 zeising
Fix security issues in xorg client libraries.
Most libraries were updated to newer versions, in some cases patches
were backported instead.
Most notably, x11/libX11 was updated to 1.6.0
Security: CVE-2013-1981
CVE-2013-1982
CVE-2013-1983
CVE-2013-1984
CVE-2013-1985
CVE-2013-1986
CVE-2013-1987
CVE-2013-1988
CVE-2013-1989
CVE-2013-1990
CVE-2013-1991
CVE-2013-1992
CVE-2013-1993
CVE-2013-1994
CVE-2013-1995
CVE-2013-1996
CVE-2013-1997
CVE-2013-1998
CVE-2013-1999
CVE-2013-2000
CVE-2013-2001
CVE-2013-2002
CVE-2013-2003
CVE-2013-2004
CVE-2013-2005
CVE-2013-2062
CVE-2013-2063
CVE-2013-2064
CVE-2013-2066
|
Saturday, 25 May 2013
|
14:37 zeising
The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:
Xorg 7.7
Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities
Additional notes:
Change pkgconf to be a build dependency.
Add a new USE_XORG, xcb, to depend on libxcb and update all ports to use
this.
Trim makefile headers.
Take maintanership of x11/xcb-proto, ok'd by ashish.
If you are running WITH_NEW_XORG=, you need to rebuild all installed
drivers, see UPDATING for more information.
Various fixes to make ports compile.
PR: ports/177942
Exp-run by: miwi
Approved by: portmgr (miwi)
Thanks to all who helped testing!
|
Friday, 25 Feb 2011
|
16:52 miwi
- Please welcome Xorg 7.5.1
The X-Server has been patched to the latest 1.7.X series, drivers
and fonts have been updated to the latest versions. This update includes
some components from Xorg 7.6 with a lot of improvements, and it seems
that the performance is much better than the old version. Also this
Update fix build issues with clang and binutils 2.17.50 in current,
remove 6.X gruft and de-author pkg-descr.
I would like to thank:
Beat Gaetzi
Dima Panov
Koop Mast
Eitan Adler
and all Testers.
PR: ports/147646
ports/148035
ports/148744
ports/150223
ports/152889
ports/154457
|
Saturday, 4 Dec 2010
|
07:34 ade
Sync to new bsd.autotools.mk
|
Saturday, 1 May 2010
|
11:41 miwi
- Update to Xorg 7.5
The Intel drivers was patched to work with
the new server. The drivers for Vesa, NV,NVIDIA and
ATI have been tested thoroughfully and seem to work fine.
A complete changelog of Xorg 7.5 can you read here:
http://www.x.org/releases/X11R7.5/
A note to FreeBSD 6.X users: We strongly recommend you
to update your system to 7.x or above.
For updating try
portupgrade -af \*
or:
portmaster -af
Please report any problems and issus to x11 (at) FreeBSD.org.
Thanks to beat@, rnoland@, fluffy@, stas@ and all testers for their help
and Feeback.
Tested by: Community and 2x exp-runs
|
Sunday, 2 Aug 2009
|
19:36 mezz
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
Friday, 23 Jan 2009
|
16:28 flz
- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).
|
Thursday, 21 Aug 2008
|
06:18 rafan
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk
- Remove CONFIGURE_TARGET hack in various bsd.*.mk
- USE_GNOME=gnometarget is now an no-op
Changes to individual ports, other than removing the CONFIGURE_TARGET hack:
= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
- comms/gnuradio
- science/abinit
- science/elmer-fem
- science/elmer-matc
- science/elmer-meshgen2d
- science/elmerfront
- science/elmerpost
= use x86_64 as ARCH
- devel/g-wrap
= other changes
- print/magicfilter
GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf
Total # of ports modified: 1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)
PR: 126524 (obsoletes 52917)
Submitted by: rafan
Tested on: two pointyhat 7-amd64 exp runs (by pav)
Approved by: portmgr (pav)
|
Thursday, 13 Mar 2008
|
10:33 flz
- Mark xtrans as a BUILD_DEPENDS only (unless specified otherwise with :both)
- Bump PORTREVISION on ports having xtrans in USE_XORG.
- Add some missing dependencies in various xorg libraries.
|
Saturday, 19 May 2007
|
20:32 flz
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
Number of commits found: 25 |