www/py-django-haystack: Remove PY_SETUPTOOLS

py-setuptools should be used rather than PY_SETUPTOOLS

devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}

Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.

With hat: python
PR: 270510, 270358

www/py-django-haystack: Convert to USE_PYTHON=pep517

- Bump PORTREVISION for package change

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

www/py-django-haystack: Update WWW and clean up pkg-descr

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

www: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *
  *  <hvo.pm@xs4all.nl>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron LI <aly@aaronly.me>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Abel Chow <achow@transoft.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Adrian Steinmann <ast@marabu.ch>
  *  Akinori MUSHA aka knu <knu@idaemons.org>

www/py-django-haystack: Update to 3.2.1

- Update WWW
- Take maintainership

Changes:	https://github.com/django-haystack/django-haystack/releases
		https://github.com/django-haystack/django-haystack/commits/master

www/py-django32: Switch consumers over to Django 3.2

Django 2.2 became End-of-Life on 11th April 2022 and Django 3.2 is the
new LTS (= Long Term Support) release which will be supported until
April 2024.

* Switch the most ports that use www/py-django22 to www/py-django32

* Switch www/seahub over to www/py-djangorestframework

* Ports that are not yet ready for Django 3.2 (only three so far) or
  those that have already been set with an expiration date were not
  taken into account.

* Bump PORTREVISION due dependency change where necessary.

PR:		261313
Reviewed by:	bofh, dvl, koobs, ultima
Approved by:	bofh, dvl, koobs, ultima, sunpoet, Kevin Golding, Ivan Rozhuk,
		Alexander Sieg (maintainers)
		maintainer timeout (remaining maintainers)
Differential Revision:	https://reviews.freebsd.org/D34859

www/py-django-haystack: Maintainer reset

There have been multiple consecutive maintainer timeouts of this port
maintained by Kristaps Kulis <kristaps.kulis@gmail.com>.  We thank
Kristaps for all his efforts and hope to welcome him back in the future.

PR:		261318
MFH:		2022Q1

www/py-django-haystack: Update to 3.1.1

Changelog since 2.8.1:

https://github.com/django-haystack/django-haystack/compare/v2.8.1...v3.1.1

PR:		261318
Approved by:	maintainer timeout (3+ weeks)

Remove # $FreeBSD$ from Makefiles.

Remove PY_SPHINX from ports using Python 3

Approved by:	 portmgr blanket
Differential Revision:	https://reviews.freebsd.org/D28093

www/py-django-haystack: Change RUN_DEPENDS

* Switch to Django 2.2 (current LTS release) because Django 1.11 is
  End-of-Life since April.

* Make USES block separate from non-relevant variables while I'm here.

* Bump PORTREVISION due changed dependencies.

PR:		246715
Approved by:	maintainer timeout (14 days)

Update Sphinx

- Repocopy textproc/py-sphinx to textproc/py-sphinx18

  Update it to 1.8.5 (latest version from 1.8.X).
  This version supports Python 2 and 3.
  Add test target.

- textproc/py-sphinx: Update to 3.0.2

  Python 3 only (3.5+).
  Add test target.

- Mk/Uses/python.mk: Add PY_SPHINX

- Update to 2.8.1
- Changed RUN_DEPENDS to Django v1.11
- Added DOCS option with the appropriate dependencies

PR:	228129
Submitted by:	freebsd_ports@k-worx.org
Approved by:	maintainer timeout
Sponsored by:	iXsystems Inc.

Simplify some USES=python

With hat:	portmgr

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

www/py-django-haystack: update to 2.5.0

- update to 2.5.0
- switch to django 1.8, because 1.6 is unsupported
- package does not installs arch-dependend files, so set NO_ARCH

PR:		212688
Requested by:	SBB <samorders@gmail.com>
Approved by:	maintainer timeout (2 weeks)

Convert tab after WWW: in pkg-descrs to single space as per PHB

Approved by:	portmgr blanket

- Fix trailing whitespace in pkg-descrs, categories [p-x]*

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

Upgrade to 2.4.1, required by latest version of reviewboard.

Approved by:	maintainer (timeout > 10d)

- Convert USE_PYTHON to new USES in www/

With hat:	python@

Update "BSD" license in www category

- Convert to PYDISTUTILS_AUTOPLIST=	yes
- Stage support
- Bump PORTREVISION

Add NO_STAGE all over the place in preparation for the staging support (cat:
www)

- Update to 1.2.7
- Tweak RUN_DEPENDS
- Fix pkg-desc WWW (needs django>=1.3)

PR:		ports/168864
Submitted by:	koobs <koobs.freebsd@gmail.com>
Approved by:	maintainer (timeout, 60 days)

- Update to 1.2.4
- Make portlint happy

PR:             ports/158318
Submitted by:   Jin-Sih Lin <linpct@gmail.com>
Approved by:    maintainer timeout, bapt (mentor, implicit)

Haystack is modular search for Django

Search doesn't have to be hard. Haystack lets you write your search code once
and choose the search engine you want it to run on.
With a familiar API that should make any Djangonaut feel right at home and an
architecture that allows you to swap things in and out as you need to, it's how
search ought to be. Haystack is BSD licensed, plays nicely with third-party app
without needing to modify the source and supports Solr, Whoosh and Xapian.

WWW: http://south.aeracode.org/

PR:             ports/155660
Submitted by:   Kristaps Kulis <kristaps.kulis at gmail.com>