www/py-django-auth-ldap: Switch to PEP517

* Bump PORTREVISION as the package no longer contains byte-code.

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

www: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *
  *  <hvo.pm@xs4all.nl>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron LI <aly@aaronly.me>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Abel Chow <achow@transoft.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Adrian Steinmann <ast@marabu.ch>
  *  Akinori MUSHA aka knu <knu@idaemons.org>

www/py-django-auth-ldap: Update to 4.1.0

Changelog:

https://github.com/django-auth-ldap/django-auth-ldap/releases/tag/4.1.0

net-mgmt/netbox: Create Django 4.0 consumers

* Django 3.2 is currently the "default" version in the ports tree due
  its long term support until April 2024.  Thus ports that are assigned
  to that version will exist until then.

  The following ports are required to make the upgrade of
  net-mgmt/netbox to the 3.2 release possible because it requires Django
  4.0.

  All of the ports listed below were created on the basis of their
  respective original ports:

  - devel/py-dj40-django-rq
  - devel/py-dj40-graphene-django

www/py-django32: Switch consumers over to Django 3.2

Django 2.2 became End-of-Life on 11th April 2022 and Django 3.2 is the
new LTS (= Long Term Support) release which will be supported until
April 2024.

* Switch the most ports that use www/py-django22 to www/py-django32

* Switch www/seahub over to www/py-djangorestframework

* Ports that are not yet ready for Django 3.2 (only three so far) or
  those that have already been set with an expiration date were not
  taken into account.

* Bump PORTREVISION due dependency change where necessary.

PR:		261313
Reviewed by:	bofh, dvl, koobs, ultima
Approved by:	bofh, dvl, koobs, ultima, sunpoet, Kevin Golding, Ivan Rozhuk,
		Alexander Sieg (maintainers)
		maintainer timeout (remaining maintainers)
Differential Revision:	https://reviews.freebsd.org/D34859

www/py-django-auth-ldap: Update to 4.0.0

* Python 3.6 is now gone from the Ports so remove the cruft that was
  required for it.

* Add a workaround to make the port still buildable with Python's
  distutils by using the "setup.py" from the previous release.

Changelog:

https://github.com/django-auth-ldap/django-auth-ldap/releases/tag/4.0.0

MFH:		2022Q1

www/py-django-auth-ldap: Update to 3.0.0

Changelog:

https://github.com/django-auth-ldap/django-auth-ldap/blob/3.0.0/CHANGES

MFH:		No (contains backwards incompatible changes)

*: Create Django 3.2 ports for net-mgmt/netbox

* Django 2.2 is currently the "default" version in the ports tree due
  its long term support until April 2022.  Thus ports that are assigned
  to that version will exist until then.

  The following ports are required to make the upgrade of
  net-mgmt/netbox to the 2.11 release possible because it requires
  Django 3.2.  All of the ports listed below were created on the basis
  of their respective original ports:

  - devel/py-dj32-django-rq
  - www/py-dj32-django-auth-ldap
  - www/py-dj32-django-cacheops (updated to a newer release)
  - www/py-dj32-django-cors-headers

Mk: switch PYTHON_REL to 5 digits to support python 3.10.x

PR:		255013
Differential Revision:	https://reviews.freebsd.org/D29418
Exp-run by:	antoine
Approved by:	wen@, no objection from python@ or portmgr@

www/py-django-auth-ldap: Update to 2.4.0

Changelog:

https://github.com/django-auth-ldap/django-auth-ldap/blob/2.4.0/CHANGES

Remove # $FreeBSD$ from Makefiles.

www/py-django-auth-ldap: Update to 2.3.0

Changelog:

https://github.com/django-auth-ldap/django-auth-ldap/blob/2.3.0/CHANGES

Remove PY_SPHINX from ports using Python 3

Approved by:	 portmgr blanket
Differential Revision:	https://reviews.freebsd.org/D28093

Create some ports that are assigned to Django 3.1 instead Django 2.2

* Django 2.2 is currently the "default" version in the ports tree due its
  long term support until April 2022.  Thus ports that are assigned to that
  version will exist until then.

  The following ports are required to make the upgrade of net-mgmt/netbox to
  the 2.9 release possible because it requires Django 3.1 and provides no
  backwards compatibility for previous versions of Django.

  - www/py-dj31-django-rq
      (copied from r539662 to use the 2.3.2 release for now)
  - www/py-dj31-django-auth-ldap
  - www/py-dj31-django-cacheops
  - www/py-dj31-django-cors-headers

www/py-django-auth-ldap: Update to 2.2.0

* Make the port concurrent safe as it also installs documentation files
  outside of Python's sitelib directory.

Changelog:

https://github.com/django-auth-ldap/django-auth-ldap/blob/2.2.0/CHANGES

Update Sphinx

- Repocopy textproc/py-sphinx to textproc/py-sphinx18

  Update it to 1.8.5 (latest version from 1.8.X).
  This version supports Python 2 and 3.
  Add test target.

- textproc/py-sphinx: Update to 3.0.2

  Python 3 only (3.5+).
  Add test target.

- Mk/Uses/python.mk: Add PY_SPHINX

Assign some ports I maintain from Django 1.11 to Django 2.2

Django 1.11 is End-of-Life since April 2020 thus switch the following ports
to Django 2.2 (which has LTS support until April 2022):

* www/py-django-auth-ldap
* www/py-django-cacheops
* www/py-django-filter
* www/py-django-prometheus

Adjust the required Python version as Django 2.2 needs at least Python 3.5+
and bump the PORTREVISION for package change.

Mark the related py-dj22-* port variants as DEPRECATED because they're
obsolete now.  Don't set an expiration date yet as they're still used by
some consumers and a few more Django 1.11 ports need to be assigned to
Django 2.2 first.

www/py-django-auth-ldap: Update to 2.1.1

Changelog:

* Removed deprecated "providing_args" from "Signal" instances.

https://github.com/django-auth-ldap/django-auth-ldap/blob/2.1.1/CHANGES

www/py-django-auth-ldap: Update to 2.1.0

Changelog:

* Reject authentication requests without a username
* Added support for Django 3.0 and Python 3.8
* Removed support for Django 2.1 which is End-of-Life

https://github.com/django-auth-ldap/django-auth-ldap/blob/2.1.0/CHANGES

www/py-django-auth-ldap: Update to 2.0.0

* Take maintainership due three consecutive maintainer timeouts
* Limit to Python 3.5 and later as upstream has dropped the support for
  Python 2 and 3.4

Changelog:

https://github.com/django-auth-ldap/django-auth-ldap/blob/2.0.0/CHANGES

PR:		238359
Approved by:	maintainer timeout

New port: www/py-dj22-django-auth-ldap

Repo-copy www/py-django-auth-ldap and assign it to Django 2.2 to enable LDAP
authentication with net-mgmt/netbox that has been switched to Django 2.2 in
r502550 .

Also limit the port to Python 3.5+ as Django 2.2 requires it as minimum
dependency and update all related CONFLICTS_INSTALL entries.

New port: www/py-dj21-django-auth-ldap

Repo-copy www/py-django-auth-ldap and assign it to Django 2.1 to enable LDAP
authentication with net-mgmt/netbox that has been switched to Django 2.1
recently.

Also limit the port to Python 3.5+ as Django 2.1 requires it as minimum
dependency and to save some overhead in the building infrastructure.

Reported by:	Thomas Kurschel (via private email)
Approved by:	miwi (mentor)
Differential Revision:	https://reviews.freebsd.org/D19576

www/py-django-auth-ldap: Update to 1.7.0

While I'm here:
* Pet portlint

Notable changes since 1.5.0:

* Add support for Python 3.7 and Django 2.1
* Fix group membership queries with DNs containing non-ascii characters
  on Python 2.7

https://github.com/django-auth-ldap/django-auth-ldap/blob/1.7.0/CHANGES

PR:		236051
Approved by:	miwi (mentor), maintainer timeout
Differential Revision:	https://reviews.freebsd.org/D19436

- Update to 1.5.0
- Switch to django111
- Added NO_ARCH
- Added DOC Options
- Update WWW

PR:	228262
Submitted by:	freebsd_ports@k-worx.org
Approved by:	maintainer timeout
Sponsored by:	iXsystems Inc.

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

www/py-django-auth-ldap: update to 1.2.7

- update to 1.2.7: this release adds support for python3 via pyldap.
- add LICENSE_FILE and NO_ARCH

PR:		206605
Approved by:	maintainer timeout (16 days)

- Switch forgotten ports over to py-django18
- Fix PYTHON_PKGNAMEPREFIX

Reported by:    antoinebot

- Switch all ports to www/py-django18
- Bump PORTREVISION

net/py-ldap2: rename to py-ldap

To better match upstream name

www/py-django-auth-ldap: convert to USES=python

- convert to USES=python
- limit python version to 2.x, because it's dependency, py-ldap2, doesn't
  support python3 yet

Approved by:	portmgr (blanket)

This is a Django authentication backend that authenticates against an LDAP
service. Configuration can be as simple as a single distinguished name template,
but there are many rich configuration options for working with users, groups,
and permissions.

WWW: http://pythonhosted.org/django-auth-ldap/

PR:		185959
Submitted by:	Alexander Kriventsov <avk@vl.ru>