www/npm: Update to 9.4.1

Changes:	https://github.com/npm/cli/releases

www/npm: Update to 9.1.2

Changes:	https://github.com/npm/cli/releases

Framework: Rewrite nodejs.mk and reorganize www/{node,npm,yarn}

The current USES=nodejs has the following issues:
- www/node is not the default version while www/node16 is.
- It also means inconsistent naming of node ports.
- www/npm duplicates with www/npm-node16.
- www/yarn duplicates with www/yarn-node16.

The notable changes are introduced to fix the above issues:
- Rewrite Mk/Uses/nodejs.mk.
- Add new LTS version of nodejs (www/noe18).
- Add new current version of nodejs (www/node19).
- Change default nodejs version from 16 to 18 (latest LTS).
- Use consistent naming for all supported node versions.
- Convert www/node, www/npm and www/yarn to meta ports.

After this commit:
- All supported node versions are named as node{14,16,18,19}
- www/node is a meta port which depends on the default version (e.g. www/node18)
- www/npm is a meta port which depends on the default version (e.g.
www/npm-node18)
- www/yarn is a meta port which depends on the default version (e.g.
www/yarn-node18)
- Bump PORTREVISION of dependent ports for dependency change (from www/node16 to
www/node18)

Discussed with:	jrm, otis, pizzamig

www/npm: Fix npm ability to run commands

PR:		268098
Approved by:	portmg (fixit blanket)

www/npm: Update to 9.1.2

- Simplify CONFLICTS_INSTALL

Changes:	https://github.com/npm/cli/releases

www/npm: Fix LICENSE

- Update WWW and clean up pkg-descr

www/npm: Update to 8.19.2

Changes:	https://github.com/npm/cli/releases

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

www/npm: Update to 8.19.1

Changes:	https://github.com/npm/cli/releases

www/npm: Fix 'npm run' by removing extra '--'

PR:		266159

www/npm: Update to 8.18.0

Changes:	https://github.com/npm/cli/releases

www/npm: Update to 8.15.1

Changes:	https://github.com/npm/cli/releases

www: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *
  *  <hvo.pm@xs4all.nl>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron LI <aly@aaronly.me>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Abel Chow <achow@transoft.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Adrian Steinmann <ast@marabu.ch>
  *  Akinori MUSHA aka knu <knu@idaemons.org>

www/npm: Update to 8.14.0

Changes:	https://github.com/npm/cli/releases

www/npm: Update to 8.13.2

Changes:	https://github.com/npm/cli/releases

www/npm: Update to 8.13.1

Changes:	https://github.com/npm/cli/releases

www/npm: Update to 8.13.0

Changes:	https://github.com/npm/cli/releases

www/npm: Update to 8.12.2

Changes:	https://github.com/npm/cli/releases

www/npm: Update to 8.12.1

Changes:	https://github.com/npm/cli/releases

www/*-node17: Rename for update of www/node to version 18

PR:		263590
Sponsored by:	The FreeBSD Foundation

www/npm: Update to 8.10.0

Changes:	https://github.com/npm/cli/releases

www/npm: Update to 8.8.0

Changes:	https://github.com/npm/cli/releases

www/npm: Update to 8.7.0

Changes:	https://github.com/npm/cli/releases

www/npm: Update to 8.6.0

Changes:	https://github.com/npm/cli/releases

www/npm: Update to 8.5.2

Changes:	https://github.com/npm/cli/releases

www/npm: Update to 8.4.0

Changes:	https://github.com/npm/cli/releases

www/npm: Fix PLIST for Python 3.7

PR:		261484
Reported by:	ler

www/npm: Update to 8.3.2

Changes:	https://github.com/npm/cli/releases

www/npm: Update to 8.2.0

Changes:	https://github.com/npm/cli/releases

*/*: use new nodejs USES flag

Simply define which nodejs version is required using the nodejs USES flag.

PR:                     259783
Differential Revision:	https://reviews.freebsd.org/D32790

www/npm: Add NODE16 option

- Update CONFLICTS_INSTALL

www/npm: Fix CPE information

Approved by:	portmgr (blanket)

www/npm: Simplify *_DESC by removing node versions

cleanup: remove more optional Node 10/12 usages

cleanup: unregister expired Node 12

Remove # $FreeBSD$ from Makefiles.

Mark ports recursively depending on Python 2.7 for expiration on June 23.

For ports optionally dependending on Python 2.7, just mark those options
as expired. Remove konquerer from the x11/kde-baseapps metaport and bump
its PORTREVISION.

Submitted by:	rene
Reviewed by:	portmgr, adridg, ehaupt, lme, madpilot, pizzamig, se, sunpoet, yuri
Approved by:	portmgr
Differential Revision:	https://reviews.freebsd.org/D28665

Add npm-node14 and NODE14 option

- Update CONFLICTS_INSTALL

PR:		250729
Submitted by:	Eric Camachat <eric@camachat.org>

Clean up Makefile

There is no flavor in this port, therefore USE_PYTHON=noflavors is no-op.

Update to 6.14.8

- Update CONFLICTS_INSTALL

Changes:	https://github.com/npm/cli/releases

Relax USES=python

- Bump PORTREVISION for dependency change

PR:		245500
Submitted by:	mfechner

www/npm remove EOL Node 8 as an option.

Add NODE12 option

Update to 6.12.1

Changes:	https://github.com/npm/cli/releases

Update to 6.11.3

Changes:	https://github.com/npm/cli/releases

Update to 6.11.2

Changes:	https://github.com/npm/cli/releases

Update to 6.11.1

Changes:	https://github.com/npm/cli/releases

Update to 6.10.3

Changes:	https://github.com/npm/cli/releases

Update to 6.10.2

Changes:	https://github.com/npm/cli/releases

Update to 6.10.1

Changes:	https://github.com/npm/cli/releases

Cosmetic change

Update to 6.10.0

Changes:	https://github.com/npm/cli/releases

Compile and install .pyc files for node-gyp

- Bump PORTREVISION for package change

PR:		238243
Submitted by:	Hiroki Tagato <tagattie@yandex.com>

www/npm: Fix the python executable name

PR:		238204
Reported by:	run failure
Approved by:	portmgr (blanket: ports/framework (python) compliance)

Remove NODE6 option

node6 expired on Apr 30, 2019.

Update NODE_DESC after r499831

Update to 6.9.0

Changes:	https://github.com/npm/cli/releases

Update to 6.8.0

Changes:	https://github.com/npm/cli/releases

Update to 6.7.0

Changes:	https://github.com/npm/cli/releases

Fix DEPENDS

Add NODE10 option

- Clean up CONFLICTS_INSTALL
- Bump PORTREVISION for dependency change

Update to 6.4.1

Changes:	https://github.com/npm/cli/releases

Update extra-patch-bug-178881

Update to 6.4.0

Changes:	https://github.com/npm/cli/releases

Update to 6.3.0

- Update WWW

Changes:	https://github.com/npm/cli/releases

Remove NODE4 option

www/node4 expired on 2018-04-30.

Update patch to fix build on i386

Update to 5.10.0

Changes:	https://github.com/npm/npm/releases

Update NODE_DESC

Update to 5.8.0

Changes:	https://github.com/npm/npm/releases

Update to 5.7.1

Changes:	https://github.com/npm/npm/releases

Fix permission of node-gyp

- Bump PORTREVISION for package change

PR:		225562
Submitted by:	bhughes
MFH:		2018Q1

Fix LICENSE

- Add LICENSE_FILE

Update to 5.6.0

Changes:	https://github.com/npm/npm/releases
		https://github.com/npm/npm/blob/v5.6.0/CHANGELOG.md

Update CONFLICTS_INSTALL

- Allow slave ports to overwrite CONFLICTS_INSTALL

Update to 5.6.0

Changes:	https://github.com/npm/npm/releases
		https://github.com/npm/npm/blob/v5.6.0/CHANGELOG.md

Fix npx permission

- Bump PORTREVISION for package change

PR:		223782
Reported by:	Lapo Luchini <lapo@lapo.it>

Change from USES=python:2 to USES=python:2.7

- Bump PORTREVISION for dependency change

Add Node.js 9.x support manually

- Bump PORTREVISION for package change

Update options for Node.js 8.x and 9.x

- Bump PORTREVISION for dependency change

Update to 5.4.2

- Revert unintended CONFLICTS_INSTALL change in previous commit

Changes:	https://github.com/npm/npm/releases
		https://github.com/npm/npm/blob/v5.4.2/CHANGELOG.md

Add NODE4, NODE6 and NODE8 options

Fix shebang

- Bump PORTREVISION for package change

Update to 5.3.0

Changes:	https://github.com/npm/npm/releases
		https://github.com/npm/npm/blob/v5.3.0/CHANGELOG.md

Update to 5.2.0

Changes:	https://github.com/npm/npm/releases
		https://github.com/npm/npm/blob/v5.2.0/CHANGELOG.md

Update to 5.0.4

Changes:	https://github.com/npm/npm/releases
		https://github.com/npm/npm/blob/v5.0.4/CHANGELOG.md

Update to 5.0.3

- Update CONFLICTS_INSTALL

Changes:	https://github.com/npm/npm/releases
		https://github.com/npm/npm/blob/v5.0.3/CHANGELOG.md

Update to 4.6.1

Changes:	https://github.com/npm/npm/releases
		https://github.com/npm/npm/blob/v4.6.1/CHANGELOG.md

Fix CONFLICTS_INSTALL

PR:		219388
Submitted by:	pawel

Update to 4.5.0

Changes:	https://github.com/npm/npm/releases
		https://github.com/npm/npm/blob/v4.5.0/CHANGELOG.md

Use USES=python:2 instead of USES=python:2.7

- Bump PORTREVISION for dependency change

PR:		217984
Reported by:	Bradley T. Hughes <bradleythughes@fastmail.fm>

Update to 4.4.4

Changes:	https://github.com/npm/npm/releases
		https://github.com/npm/npm/blob/v4.4.4/CHANGELOG.md

Silence patch message

Set executable bit on lib/node_modules/npm/bin/npm-cli.js
This fixes runtime

Update to 4.3.0

- Change npm installation [1]

Starting with this update, npm will be built, installed and archived on my own
box to speed up the installation. The installation on target machines will be
simply extraction and copy.

Changes:	https://github.com/npm/npm/releases
		https://github.com/npm/npm/blob/v4.3.0/CHANGELOG.md
Suggested by:	adamw [1]

- Update to 4.1.2

Changes:	https://github.com/npm/npm/releases
		https://github.com/npm/npm/blob/v4.1.2/CHANGELOG.md

- Update to 4.1.1

Changes:	https://github.com/npm/npm/releases
		https://github.com/npm/npm/blob/v4.1.1/CHANGELOG.md

Update maintainer section: use FETCH_CMD

Note that 'A' flag has been remove from FETCH_ARGS in r338507 (3 years ago).

- Update to 4.0.5

Changes:	https://github.com/npm/npm/releases
		https://github.com/npm/npm/blob/v4.0.5/CHANGELOG.md