Add VIDEO knob to OPTIONS_DEFINE for choose original or third-party
MP4 module.

OptionsNGfy.
Most name of variables are shortened, s/_MODULE_//g.

Thanks to:      bapt

Update third-party module naxsi from 0.45 to 0.46-1.

Do not bump PORTREVISION because this module is disabled by default.

Add third-party RTMP module, v.0.1.5,
https://github.com/arut/nginx-rtmp-module.

Note! The RTMP module does not share data between workers and only
works in one-worker mode.

Do not bump PORTREVISION because this module is disabled by default.

Spotted by:     Patrick Ernst aka patrick dot ernst at maxxbone dot com

Update third-party modules (openresty 1.0.15.5):

o) lua     - from 0.5.0rc27 to 0.5.0rc28;
o) rds_scv - from 0.05rc1 to 0.05rc2.

Remove needless patch.

Do not bump PORTREVISIONs because these modules are disabled by default.

Update from 1.2.0 to 1.3.0.

<ChangeLog>

*) Feature: the "debug_connection" directive now supports IPv6 addresses
   and the "unix:" parameter.

*) Feature: the "set_real_ip_from" directive and the "proxy" parameter
   of the "geo" directive now support IPv6 addresses.

*) Feature: the "real_ip_recursive", "geoip_proxy", and
   "geoip_proxy_recursive" directives.

*) Feature: the "proxy_recursive" parameter of the "geo" directive.

Update third-party modules (openresty 1.0.15.3):

o) lua      - from 0.5.0rc24 to 0.5.0rc27;
o) set_misc - from 0.22rc5 to 0.22rc7;
o) srcache  - from 0.13rc6 to 0.13rc8;

Do not bump PORTREVISIONs because these modules are disabled by default.

Add two new third-party modules:

1) let, 0.0.4;
2) upstream_sticky, 1.0;

Do not bump PORTREVISIONs because these modules are disabled by default.

Spotted by:     Serguei Okladnikov <oklaspec@mail.ru> (1)
PR:             167494                                (2)

Update third-party modules (openresty 1.0.11.28):

o) echo    - from 0.38rc1 to 0.38rc2;
o) lua     - from 0.4.1 to 0.5.0rc24;
o) rds-csv - from 0.04 to 0.05rc1;
o) redis2  - from 0.08rc2 to 0.08rc4;
o) srcache - from 0.13rc3 to 0.13.rc6;
o) xss     - from 0.03rc8 to 0.03rc9;
o) iconv   - from 0.10rc5 to 0.10rc7;

Do not bump PORTREVISIONs because these modules are disabled by default.

Add one more WWW site to pkg-descr file.
Remove -DNGX_DEBUG_MALLOC flag.         (*)
Bump PORTREVISION.

Requested by:   Maxim Dounin aka mdounin at mdounin dot ru (*)

Update to latest stable version 1.2.0.

<ChangeLog>

*) Bugfix: a segmentation fault might occur in a worker process if the
   "try_files" directive was used; the bug had appeared in 1.1.19.

*) Bugfix: response might be truncated if there were more than IOV_MAX
   buffers used.

*) Bugfix: in the "crop" parameter of the "image_filter" directive.
   Thanks to Maxim Bublis.

</ChangeLog>

Update pkg-descr to modern variant.
Bump PORTREVISIONs.

PR:     ports/167089

Update third-party naxsi module rom 0.43 to 0.45.

Do not bump PORTREVISIONs because this module disabled by default.

PR:     ports/167166, ports/167167

Update from 3.0.11 to 3.0.12:

o) www/rubygem-passenger;
o) third-party passenger module for www/nginx and www/nginx-devel.

Security update from 1.1.18 to 1.1.19.

<ChangeLog>

*) Security: specially crafted mp4 file might allow to overwrite memory
   locations in a worker process if the ngx_http_mp4_module was used,
   potentially resulting in arbitrary code execution (CVE-2012-2089).
   Thanks to Matthew Daley.

*) Bugfix: nginx/Windows might be terminated abnormally.
   Thanks to Vincent Lee.

*) Bugfix: nginx hogged CPU if all servers in an upstream were marked as
   "backup".

Update third-party ngx_http_redis from 0.3.5 to 0.3.6.
Add USERS/GROUPS for www/nginx.

Do not bump PORTREVISIONs because this module disabled by default.

Feature safe:   yes

<ChangeLog>

*) Feature: redis_gzip_flag.  Usefull if you are prefer to
   store data compressed in redis.  Works with ngx_http_gunzip_filter
   module.
   Thanks to Maxim Dounin.

*) Bugfix: ngx_http_redis_module might issue the error message
   "redis sent invalid trailer".
   Thanks to agentzh.

</ChangeLog>

Update from 1.1.17 to 1.1.18.
Add USERS/GROUPS.

Feature safe:   yes

<ChangeLog>

*) Change: keepalive connections are no longer disabled for Safari by
   default.

*) Feature: the $connection_requests variable.

*) Feature: $tcpinfo_rtt, $tcpinfo_rttvar, $tcpinfo_snd_cwnd and
   $tcpinfo_rcv_space variables.

Security update from 1.1.16 to 1.1.17.

Security:      
http://www.vuxml.org/freebsd/29194cb8-6e9f-11e1-8376-f0def16c5c1b.html
Feature safe:   yes

<ChangeLog>

*) Security: content of previously freed memory might be sent to a
   client if backend returned specially crafted response.
   Thanks to Matthew Daley.

*) Bugfix: in the embedded perl module if used from SSI.
   Thanks to Matthew Daley.

*) Bugfix: in the ngx_http_uwsgi_module.

</ChangeLog>

Fix fetch notice third-party module.

Fix fetch zip and naxsi third-party modules.

Update from 1.1.15 to 1.1.16.

<ChangeLog>

*) Change: the simultaneous subrequest limit has been raised to 200.

*) Feature: the "from" parameter of the "disable_symlinks" directive.

*) Feature: the "return" and "error_page" directives can be used to
   return 307 redirections.

*) Bugfix: a segmentation fault might occur in a worker process if the
   "resolver" directive was used and there was no "error_log" directive
   specified at global level.
   Thanks to Roman Arutyunyan.

Update third-party naxsi module from 0.42 to 0.43.
Fix libraries dependences if WITH_LUA_MODULE knob defined. [1]

Do not bump PORTREVISIONs because this module disabled by default.

Submitted by:   Alexandre Biancalana <ale@biancalanas.net> [1]

Update slowfs_cache third-party module from 1.7 to 1.8.

Do not bump PORTREVISIONs because this module disabled by default.

<ChangeLog>

2012-02-28    VERSION 1.8
  * Fix setting of slowfs process title.
    In case when local path was over 277 characters long, slowfs
    process would crash, which would result in file not being
    copied to the cache.
    Bug had appeared in version 1.7.
</ChangeLog>

Update slowfs_cache third-party module from 1.6 to 1.7.

Do not bump PORTREVISION because this module disabled by default.

<ChangeLog>

2012-02-28    VERSION 1.7
  * Fix on-disk cache size calculation.
    Since the initial release, recorded on-disk cache size was
    decreased twice for purged content (once during cache purge
    and once during subsequent cache update).
    This resulted in recorded on-disk cache size being much
    smaller than in reality, which could lead to on-disk cache
    outgrowing defined "max_size" parameter.
    Patch from Pyry Hakulinen (via ngx_cache_purge, months ago).

  * Append path of the file being cached to the slowfs process
    title.

</ChangeLog>

Move upward extra_commands string for compatible with rc.conf.d
feature.

Do not bump PORTREVISIONs.
PR:     165454

Add two third-party modules:

o) web_dav_extension, for support missing PROPFIND and OPTIONS commands;
o) http_auth_digest, providing support for RFC 2617 Digest Authentication.

PR:     165276, 165333

Update from 1.1.14 to 1.1.15.

<ChangeLog>

*) Feature: the "disable_symlinks" directive.

*) Feature: the "proxy_cookie_domain" and "proxy_cookie_path"
   directives.

*) Bugfix: nginx might log incorrect error "upstream prematurely closed
   connection" instead of correct "upstream sent too big header" one.
   Thanks to Feibo Li.

*) Bugfix: nginx could not be built with the ngx_http_perl_module if the
   --with-openssl option was used.

Bump pcre library dependency due to 8.30 update

Use ${LOCALBASE} instead of ${PREFIX} for search headers and libraries
for third-party modules.

Do not bump PORTREVISIONs.

Update third-party modules:

o) echo from 0.37 to 0.38rc1;
o) headers_more from 0.16 to 0.17rc1;
o) drizzle from 0.1.2rc4 to 0.1.2rc6;
o) set_misc from 0.22rc4 to 0.22rc5.

Update third-party lua module from 0.4.0 to bugfix release 0.4.1.

Update from 1.1.13 to 1.1.14.

<ChangeLog>

*) Feature: multiple "limit_req" limits may be used simultaneously.

*) Bugfix: in error handling while connecting to a backend.
   Thanks to Piotr Sikora.

*) Bugfix: in AIO error handling on FreeBSD.

*) Bugfix: in the OpenSSL library initialization.

*) Bugfix: the "proxy_redirect" directives might not be correctly
   inherited.

*) Bugfix: memory leak during reconfiguration if the "pcre_jit"
   directive was used.

</ChangeLog>

Move luajit from devel to lang directory.

Notice from:    linimon

Update third-party modules:

o) memc from 0.12 to 0.13rc3;
o) redis2 from 0.07 to 0.08rc2;
o) set_misc from 0.22rc3 to 0.22rc4;
o) srcache from 0.12 to 0.13rc3;
o) xss from 0.03rc3 to 0.03rc8.

Update third-party encrypted_session module from 0.01 to 0.02.

Update from 1.1.12 to 1.1.13.

<ChangeLog>

*) Feature: the "TLSv1.1" and "TLSv1.2" parameters of the
   "ssl_protocols" directive.

*) Bugfix: the "limit_req" directive parameters were not inherited
   correctly; the bug had appeared in 1.1.12.

*) Bugfix: the "proxy_redirect" directive incorrectly processed
   "Refresh" header if regular expression were used.

*) Bugfix: the "proxy_cache_use_stale" directive with "error" parameter
   did not return answer from cache if there were no live upstreams.

*) Bugfix: the "worker_cpu_affinity" directive might not work.

*) Bugfix: nginx could not be built on Solaris; the bug had appeared in
   1.1.12.

*) Bugfix: in the ngx_http_mp4_module.

</ChangeLog>

Update third-party headers_more module from 0.15 to 0.16.

<ChangeLog>

* bugfix: the on-demand handler/filter registration mechanism did
  not work fully for config reload via the HUP signal.

* bugfix: when setting a multi-value response header to a single
  value, the single value might be repeated on each old value.

* feature: added some debugging outputs that can be enabled by
  the --with-debug option when building nginx or ngx_openresty.

* bugfix: we should set header hash using ngx_hash_key_lc, not
  simply to 1.

In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

Update third-party echo module from 0.36 to 0.37.

Add 4 third-party modules:

o) arrayvar, add support for array variables to nginx config files;
o) encrypted-session, for encrypt and decrypt nginx variable values;
o) form-input, reads HTTP POST and PUT request body encoded in
   "application/x-www-form-urlencoded", and parse the arguments in
   request body into nginx variables;
o) iconv, to convert characters of different encoding (by libiconv).

Update third-party lua module from 0.3 to latest stable version 0.4.
Also, switched from default lua interpreter to luajit - a Lua Just-In-Time
compiler
for speed-up lua module based applications (nginx's configurations).
Fix issue with %%PREFIX%% substitution for lua module.

Add three new third-party modules:

o) drizzle -  an upstream module that talks to mysql and drizzle by libdrizzle;
o) rds_csv -  an output filter module to convert Resty-DBD-Streams (RDS) to
   Comma-Separated Values (CSV);
o) rds_json - an output filter that formats Resty DBD Streams generated by
   ngx_drizzle and others to JSON.

Do not bump PORTREVISION because these modules disabled by default.

Update third-party http_subs_filter module from 0.5.2.r45 to 0.5.2.r53.
Remove needless extra patch.

Update third-party upload_progress module from 0.8.2 to 0.8.3.
Change the download page to github.com.

Do not bump PORTREVISION because these modules disabled by default.

Update third-party ngx_postgres module from 0.8 to 0.9.
Also remove needless patch.

Do not bump PORTREVISION because these modules disabled by default.

<ChangeLog>

* Improve debug logging.
  From Yichun Zhang (agentzh).

* Fix compatibility with poll, select and /dev/poll event models.
  Reported by Yichun Zhang (agentzh).

* Fix compatibility with PostgreSQL 9.x.
  Reported by Yichun Zhang (agentzh).

Add naxsi third-party module, version 0.42.
Move down checksums for devel_kit third-party module.
Do not bump PORTREVISION because these modules disabled by default.

PR:     162783

Update from 1.1.11 to 1.1.12.

<ChangeLog>

*) Change: a "proxy_pass" directive without URI part now uses changed
   URI after redirection with the "error_page" directive;
   Thanks to Lanshun Zhou.

*) Feature: the "proxy/fastcgi/scgi/uwsgi_cache_lock",
   "proxy/fastcgi/scgi/uwsgi_cache_lock_timeout" directives.

*) Feature: the "pcre_jit" directive.

*) Feature: the "if" SSI command supports captures in regular
   expressions.

Update third-party cache_purge module from 1.4 to 1.5.

<ChangeLog>

  * Fix on-disk cache size calculation.
    Since the initial release, recorded on-disk cache size was
    decreased twice for purged content (once during cache purge
    and once during subsequent cache update).
    This resulted in recorded on-disk cache size being much
    smaller than in reality, which could lead to on-disk cache
    outgrowing defined "max_size" parameter.
    Patch from Pyry Hakulinen.

</ChangeLog>

Update from 1.1.9 to 1.1.11.

The only one third-party subs filter module using
ngx_regex_capture_count(), add as extra patch.

<ChangeLog>

Changes with nginx 1.1.11                                        12 Dec 2011

*) Feature: the "so_keepalive" parameter of the "listen" directive.
   Thanks to Vsevolod Stakhov.

*) Feature: the "if_not_empty" parameter of the
   "fastcgi/scgi/uwsgi_param" directives.

Add set-misc-nginx third-party module.

Remove DEVEL_KIT_MODULE from OPTIONS, because the devel_kit module
is used as a toolkit for other modules.

Add internal USE_NGINX_DEVEL_KIT variable.

Cleanup whitespaces.

Do not bump PORTREVISION because these modules disabled by default.

Feature safe:   yes

PR:             163148 (mostly)

Merge latest changes for third-party udplog module from upstream
at https://raw.github.com/vkholodkov/nginx-udplog-module/.

Do not bump PORTREVISION because this module disabled by default.

Feature safe:   yes

PR:             163023

Update from 1.1.8 to 1.1.9.
Feature safe:   yes.

<ChangeLog>

*) Change: now double quotes are encoded in an "echo" SSI-command
   output.
   Thanks to Zaur Abasmirzoev.

*) Feature: the "valid" parameter of the "resolver" directive. By
   default TTL returned by a DNS server is used.
   Thanks to Kirill A. Korinskiy.

*) Bugfix: nginx might hang after a worker process abnormal termination.

Update from 3.0.9 to 3.0.11:
o) www/rubygem-passenger;       [*]
o) third-party passenger module for www/nginx and www/nginx-devel.

Feature safe:   yes

Approved by:    maintainer      [*]

Fix build on fresh -CURRENT.
Do not bump PORTREVISIONs.

Feature safe:   yes
Patch from:     Igor Sysoev (author)
PR:             162446

Fix installation path for perl module.
Bump PORTREVISION.

Feature safe:   yes

Problem found by:       Maxim Dounin <mdounin@mdounin.ru>

Update from 1.1.7 to 1.1.8.
Feature safe:   yes.

<ChangeLog>

*) Change: the ngx_http_limit_zone_module was renamed to the
   ngx_http_limit_conn_module.

*) Change: the "limit_zone" directive was superseded by the
   "limit_conn_zone" directive with a new syntax.

*) Feature: support for multiple "limit_conn" limits on the same level.

*) Feature: the "image_filter_sharpen" directive.

Add nginx-x-rid-header third-party module.

PR:             ports/162252
Submitted by:   mm

Update from 1.1.6 to 1.1.7.
Update syslog patch.

<ChangeLog>

*) Feature: support of several resolvers in the "resolver" directive.
   Thanks to Kirill A. Korinskiy.

*) Bugfix: a segmentation fault occurred on start or while
   reconfiguration if the "ssl" directive was used at http level and
   there was no "ssl_certificate" defined.

*) Bugfix: reduced memory consumption while proxying of big files if
   they were buffered to disk.

*) Bugfix: a segmentation fault might occur in a worker process if
   "proxy_http_version 1.1" directive was used.

*) Bugfix: in the "expires @time" directive.

</ChangeLog>

Update from 1.1.5 to 1.1.6.
Update WWW.

<ChangeLog>

*) Change in internal API: now module context data are cleared while
   internal redirect to named location.
   Requested by Yichun Zhang.

*) Change: if a server in an upstream failed, only one request will be
   sent to it after fail_timeout; the server will be considered alive if
   it will successfully respond to the request.

*) Change: now the 0x7F-0x1F characters are escaped as \xXX in an
   access_log.

Update third-party cache_purge module from 1.3 to 1.4.

Do not bump PORTREVISION.

<ChangeLog>

* Add AIO support.
  Requested by Emin Hasanov.

</ChangeLog>

Update from 1.1.4 to 1.1.5.

<ChangeLog>

*) Feature: the "uwsgi_buffering" and "scgi_buffering" directives.
   Thanks to Peter Smit.

*) Bugfix: non-cacheable responses might be cached if
   "proxy_cache_bypass" directive was used.
   Thanks to John Ferlito.

*) Bugfix: in HTTP/1.1 support in the ngx_http_proxy_module.

*) Bugfix: cached responses with an empty body were returned
   incorrectly; the bug had appeared in 0.8.31.

*) Bugfix: 201 responses of the ngx_http_dav_module were incorrect; the
   bug had appeared in 0.8.32.

*) Bugfix: in the "return" directive.

*) Bugfix: the "ssl_session_cache builtin" directive caused segmentation
   fault; the bug had appeared in 1.1.1.

</ChangeLog>

Update from 1.1.3 to 1.1.4.
Remove third-party upstream_keepalive module, in the base now.
Update third-party http_redis module from 0.3.4 to 0.3.5.
Update third-party http_gunzip_filter module from 0.3 to 0.4.
Add patch for ngx_postgres module.

Note: nginx-1.1.4 release introduces several API changes which may
affect 3rd party modules.

<ChangeLog>

Changes with nginx 1.1.4

*) Feature: the ngx_http_upstream_keepalive module.

Fix typo for http_mp4 module.

Do not bump PORTREVISION because http_mp4 module disabled by default.

Found by:       Jim Ohlstein aka jim dot ohlstein at gmail dot com [1]

Update from 1.1.2 to 1.1.3.

Original http_mp4 and third-party http_mp4_h268 modules are
incompatible, add note about.

Change state from BROKEN to IGNORE for building third-party lua
module with devel_kit module.

<ChangeLog>

*) Feature: the module ngx_http_mp4_module.

*) Bugfix: in Linux AIO combined with open_file_cache.

*) Bugfix: open_file_cache did not update file info on retest if file
   was not atomically changed.

*) Bugfix: nginx could not be built on MacOSX 10.7.

</ChangeLog>

- Chase devel/google-perftools shlib bump
- security/tor*: add -L${LOCALBASE}/lib to LDFLAGS (fixes linking)

Approved by:    miwi, wen (mentors implicit)

Update from 1.1.1 to 1.1.2.

<ChangeLog>

*) Change: now if total size of all ranges is greater than source
   response size, then nginx disables ranges and returns just the source
   response.

*) Feature: the "max_ranges" directive.

*) Bugfix: the "ssl_verify_client", "ssl_verify_depth", and
   "ssl_prefer_server_ciphers" directives might work incorrectly if SNI
   was used.

*) Bugfix: in the "proxy/fastcgi/scgi/uwsgi_ignore_client_abort"
   directives.

</ChangeLog>

Update from 3.0.8 to 3.0.9:

o) www/rubygem-passenger; [1]
o) passenger support for www/nginx and www/nginx-devel;

Remove needless patch.

Do not bump PORTREVISION because passenger third-party module
disabled by default.

Approved by:    maintainer [1]

Update third-party lua module from 0.2 to 0.3.

Bump PORTREVISION is unnecessary, because the module is
disabled by default.

Update third-party module ngx_http_redis from 0.3.3 to 0.3.4.

<ChangeLog>

*) Change: better error messages diagnostics in select phase.

*) Add more comments in source code.

*) Bugfix: fix interaction with redis if redis_db was unused.
   Found by Sergey Makarov.
   Thanks to Igor Sysoev.

*) Feature: add test suite for redis backend.
   Thanks to Maxim Dounin.

</ChangeLog>

Do not bump PORTREVISION.

Update from 1.1.0 to 1.1.1.

<ChangeLog>

*) Change: now cache loader processes either as many files as specified
   by "loader_files" parameter or works no more than time specified by
   "loader_threshold" parameter during each iteration.

*) Change: now SIGWINCH signal works only in daemon mode.

*) Feature: now shared zones and caches use POSIX semaphores on
   Solaris.
   Thanks to Den Ivanov.

*) Feature: accept filters are now supported on NetBSD.

Update from 3.0.7 to 3.0.8:

1) www/rubygem-passenger;

2) passenger support for www/nginx and www/nginx-devel;

Also add patch for fix NULL pointer crash that occurs when
HTTP 1.0 Host header isn't given, obtained from passenger's
upstream.

Approved by:    maintainer [1]

Update from 1.0.5 to 1.1.0.

<ChangeLog>

*) Feature: cache loader run time decrease.

*) Feature: "loader_files", "loader_sleep", and "loader_threshold"
   options of the "proxy/fastcgi/scgi/uwsgi_cache_path" directives.

*) Feature: loading time decrease of configuration with large number of
   HTTPS sites.

*) Feature: now nginx supports ECDHE key exchange ciphers.
   Thanks to Adrian Kotelba.

Add one more third-party module nginx-gridfs 0.8 - module to serve content
directly from MongoDB's GridFS.

Update nginx_redis2 module from 0.7rc5 to 0.7.

Fix compile mod_zip module.

Move down CHUNKIN_MODULE in OPTIONS.

Bump PORTREVISION is unnecessary, because these modules are
disabled by default.

Update from 1.0.4 to 1.0.5.

Fix third-party accept_language fetch by moving to github.

<ChangeLog>

*) Change: now default SSL ciphers are "HIGH:!aNULL:!MD5".
   Thanks to Rob Stradling.

*) Feature: the "referer_hash_max_size" and "referer_hash_bucket_size"
   directives.
   Thanks to Witold Filipczyk.

*) Feature: $uid_reset variable.

Add two more third-party modules:

o) chunkin-nginx-module - HTTP 1.1 chunked-encoding request body support;
o) xss-nginx-module - native cross-site scripting support in nginx.

Update nginx_eval_module to the latest version 1.0.3, move MASTER_SITES
to github.

Bump PORTREVISION is unnecessary, because these modules are
disabled by default.

Add one more third-party module:

o) ngx_postgres-0.8 - upstream module that allows nginx to
   communicate directly with PostgreSQL database.

Bump PORTREVISION is unnecessary, because these modules are
disabled by default.

Add 3 third-party modules:

o) ngx_devel_kit - module that is designed to extend the core
   functionality of nginx;
o) ngx_lua - embed the power of lua into nginx;
o) ngx_redis2 - upstream module for the Redis database 2.0 protocol.

Bump PORTREVISION is unnecessary, because these modules are
disabled by default.

Add third-party module srcache-0.12.

Use more or less canonical name for github.com MASTER_SITES.
Fix fetch for third-party module memc.

Bump PORTREVISION is unnecessary, because these modules are
disabled by default.

Update third-party modules:

o) echo from 0.34 to 0.36;
o) headers_more from 0.14 to 0.15;
o) memc from 0.11 to 0.12.

Change default MASTER_SITES for these modules from MASTER_SITE_LOCAL
to http://download.github.com/.

Fix whitespaces.

Bump PORTREVISION is unnecessary, because these modules are
disabled by default.

Update third party nginx_substitutions_filter from 0.5.2 revision 44 to
0.5.2 revision 45.

Do not bump PORTREVISION.

Update third party ngx_http_redis module from 0.3.2 to 0.3.3.

Do not bump PORTREVISION.

<ChangeLog>

*) Bugfix: fix interaction with redis if redis_db was used.
   Also, compile with -Werror now is possible.

</ChangeLog>

Update from 1.0.3 to 1.0.4.

<ChangeLog>

*) Change: now regular expressions case sensitivity in the "map"
   directive is given by prefixes "~" or "~*".

*) Feature: now shared zones and caches use POSIX semaphores on Linux.
   Thanks to Denis F. Latypoff.

*) Bugfix: "stalled" cache updating" alert.

*) Bugfix: nginx could not be built --without-http_auth_basic_module;
   the bug had appeared in 1.0.3.

</ChangeLog>

Add vendor patch for fix build with

% configure ...  --without-http_auth_basic_module ...

Bump PORTREVISION is unnecessary, because http_auth_basic module is
enabled by default.

Update from 1.0.2 to 1.0.3.

<ChangeLog>

*) Feature: the "auth_basic_user_file" directive supports "$apr1",
   "{PLAIN}", and "{SSHA}" password encryption methods.
   Thanks to Maxim Dounin.

*) Feature: the "geoip_org" directive and $geoip_org variable.
   Thanks to Alexander Uskov, Arnaud Granal, and Denis F. Latypoff.

*) Feature: ngx_http_geo_module and ngx_http_geoip_module support IPv4
   addresses mapped to IPv6 addresses.

*) Bugfix: a segmentation fault occurred in a worker process during
   testing IPv4 address mapped to IPv6 address, if access or deny rules
   were defined only for IPv6; the bug had appeared in 0.8.22.

*) Bugfix: a cached reponse may be broken if proxy/fastcgi/scgi/
   uwsgi_cache_bypass and proxy/fastcgi/scgi/uwsgi_no_cache directive
   values were different; the bug had appeared in 0.8.46.

</ChangeLog>

Update from 1.0.1 to 1.0.2.

<ChangeLog>

*) Feature: now shared zones and caches use POSIX semaphores.

*) Bugfix: in the "rotate" parameter of the "image_filter" directive.
   Thanks to Adam Bocim.

*) Bugfix: nginx could not be built on Solaris; the bug had appeared in
   1.0.1.

</ChangeLog>

Update from 1.0.0 to 1.0.1.
Update CONFLICTS.

Also update third party modules:
o) ngx_cache_purge from 1.2 to 1.3;
o) ngx_slowfs_cache from 1.5 to 1.6.

<ChangeLog>

*) Change: now the "split_clients" directive uses MurmurHash2 algorithm
   because of better distribution.
   Thanks to Oleg Mamontov.

*) Change: now long strings starting with zero are not considered as
   false values.

Update third party upstream keepalive module from 0.3 to 0.4.

Do not bump PORTREVISION.

<ChangeLog>

*) Bugfix: the "[alert] ... open socket ... left in connection ..."
   messages were logged on nginx worker process gracefull exit for
   each cached connection; the bug had appeared in 0.3.

</ChangeLog>

Update from 3.0.6 to 3.0.7:

1) www/rubygem-passenger;

2) passenger support for www/nginx and www/nginx-devel;
   update passenger's version for patches.

3) for speed-up rails applications build passenger without
   debugging information by default.  Otherwise WITH_DEBUG
   required.

Approved by:    maintainer [1,3]

Update to latest stable version 1.0.0.

For speed-up rails applications don't build debugging information for
passenger module by default.  Otherwise WITH_DEBUG required.

Remove needless nginx.8 for www/nginx, now its in the distro.

<ChangeLog>

*) Bugfix: a cache manager might hog CPU after reload.
   Thanks to Maxim Dounin.

*) Bugfix: an "image_filter crop" directive worked incorrectly coupled
   with an "image_filter rotate 180" directive.

*) Bugfix: a "satisfy any" directive disabled custom 401 error page.

</ChangeLog>

Add third-party http_subs_filter module.
Do not bump PORTREVISION.

PR:     156163

Update from 0.9.6 to 0.9.7.

<ChangeLog>

*) Feature: now keepalive connections may be closed premature, if there
   are no free worker connections.
   Thanks to Maxim Dounin.

*) Feature: the "rotate" parameter of the "image_filter" directive.
   Thanks to Adam Bocim.

*) Bugfix: a case when a backend in "fastcgi_pass", "scgi_pass", or
   "uwsgi_pass" directives is given by expression and refers to a
   defined upstream.

</ChangeLog>

Update third-party fancyindex module from 0.3 to 0.3.1.

Do not bump PORTREVISIONs.

Update from 3.0.5 to 3.0.6:

o) www/rubygem-passenger; [*]
o) passenger support for www/nginx and www/nginx-devel.

More accurate for detect dependence of nginx ports. [*]

Approved by:    maintainer [*]

Update from 0.9.5 to 0.9.6.

<ChangeLog>

*) Feature: the "map" directive supports regular expressions as value
   of the first parameter.

*) Feature: $time_iso8601 access_log variable.
   Thanks to Michael Lustfield.

</ChangeLog>

Switch IPv6 support on by default.

Bump PORTREVISIONs.

Spotted by:     tom

Update from 3.0.4 to 3.0.5:

o) www/rubygem-passenger; (1)
o) passenger support for www/nginx and www/nginx-devel. (2)

Adopt passenger's version update for extra patches.

Update preferred nginx version (1).
Do not bump PORTREVISIONs. (2)

Approved by:    Jacob Atzen <jatzen@gmail.com> (maintainer) (1)

Update from 3.0.3 to 3.0.4:

o) www/rubygem-passenger; (1)
o) passenger support for www/nginx and www/nginx-devel. (2)

Adopt passenger's version update for extra patches.

Do not bump PORTREVISIONs. (2)

Approved by:    Jacob Atzen <jatzen@gmail.com> (maintainer) (1)

- Chase devel/google-perftools shlib bump

Update from 3.0.2 to 3.0.3:

o) www/rubygem-passenger; (1)
o) passenger support for www/nginx and www/nginx-devel. (2)

Adopt passenger's version update for extra patches.

Do not bump PORTREVISIONs. (2)

Approved by:    Jacob Atzen <jatzen@gmail.com> (maintainer) (1)

Update from 0.9.4 to 0.9.5.

<ChangeLog>

*) Change: now nginx uses a default listen backlog value -1 on
   Linux.
   Thanks to Andrei Nigmatulin.

*) Feature: the "utf8" parameter of "geoip_country" and "geoip_city"
   directives.
   Thanks to Denis F. Latypoff.

*) Bugfix: in a default "proxy_redirect" directive if "proxy_pass"
   directive has no URI part.
   Thanks to Maxim Dounin.

*) Bugfix: an "error_page" directive did not work with nonstandard
   error codes; the bug had appeared in 0.8.53.
   Thanks to Maxim Dounin.

</ChangeLog>

Update third-party headers_more module from 0.13 to 0.14.

Do not bump PORTREVISIONs.

Feature safe:   yes