| Port details |
- py-trans Module for performing transliteration
- 2.1.0 textproc
 =0      2.1.0Version of this port present on the latest quarterly branch. - Maintainer: sunpoet@FreeBSD.org
- Port Added: 2012-09-15 07:49:06
- Last Update: 2023-06-27 19:34:34
- Commit Hash: 3d9a815
- Also Listed In: python
- License: BSDunclear
- WWW:
- https://github.com/zzzsochi/trans
- Description:
- This module translates national characters into similar sounding latin
characters (transliteration). At the moment, Czech, Greek, Latvian, Polish,
Turkish, Russian, Ukrainian alphabets are supported (it covers 99% of needs).
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}trans>0:textproc/py-trans@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/textproc/py-trans/ && make install clean
- To add the package, run one of these commands:
- pkg install textproc/py-trans
- pkg install py39-trans
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-trans listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-trans
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1532997024
SHA256 (trans-2.1.0.tar.bz2) = 417d8f7862a4a01470bdf0ab2a96b60983e459d202c1b12e8df3fa563146b71f
SIZE (trans-2.1.0.tar.bz2) = 6864
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- textproc_py-trans
- USES:
- python tar:bzip2
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
2.1.0
27 Jun 2023 19:34:34
 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
2.1.0
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
2.1.0
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
2.1.0
07 Apr 2021 08:09:01
|
Mathieu Arnold (mat) |
One more small cleanup, forgotten yesterday.
Reported by: lwhsu |
2.1.0
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
2.1.0
28 Dec 2020 23:02:15
 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
2.1.0
17 Jun 2020 18:01:23
|
sunpoet |
Update WWW
- Take maintainership |
2.1.0
09 Jun 2019 15:27:18
|
kai |
textproc/py-trans: Update to 2.1.0
* Relax the Python version requirements because support for Python 3 was
introduced with the 2.0 release.
Also while I'm here:
* Mark the port as architecture neutral by adding NO_ARCH
* Reset the maintainer due a period of very long absence
PR: 230217
Submitted by: Nathan <ndowens@yahoo.com> (based on)
Reviewed by: tobik
Approved by: maintainer (timeout, more than 11 months) |
2.0.1_1
25 Apr 2018 16:42:38
|
amdmi3 |
Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.
Approved by: portmgr blanket, mat |
2.0.1_1
11 Mar 2018 19:46:41
|
sunpoet |
Expand _LICENSE_PERMS_DEFAULT
Approved by: portmgr (blanket) |
2.0.1_1
24 Feb 2018 14:35:10
|
riggs |
Explain unclear license situation (see Makefile); bump PORTREVISION
PR: 222577
Submitted by: yasu@utahime.org
Reviewed by: riggs |
2.0.1
30 Nov 2017 15:50:34
 |
mat |
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above ) |
2.0.1
25 Nov 2015 02:28:59
|
wen |
- Update to 2.0.1
PR: 203978
Submitted by: ports@toco-domains.de
Approved by: maintainer(timeout, >30 days) |
2.0
07 Dec 2014 10:01:37
|
mva |
- Convert textproc/ to USES=python
With hat: python@ |
2.0
29 Jul 2014 21:43:18
|
adamw |
Convert some more USE_BZIP2 to USES=tar:bzip2
Approved by: portmgr (not really, but touches unstaged ports) |
2.0
10 Feb 2014 08:18:31
|
culot |
- Update to 2.0
- Support stagedir
Changes: https://pypi.python.org/pypi/trans#changelog
PR: ports/185961
Submitted by: Eero Hanninen <fax@nohik.ee>
Approved by: d.pryadko@rambler-co.ru (maintainer timeout, >14 days) |
1.5.1
13 Jan 2014 21:00:04
|
rene |
Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by: python (mva, rm)
Approved by: portmgr-lurkers (mat) |
1.5.1
20 Nov 2013 20:51:25
|
sunpoet |
- Update WWW:
- http://cheeseshop.python.org/ -> https://pypi.python.org/
- http://pypi.python.org/ -> https://pypi.python.org/
With hat: python
Approved by: bapt (portmgr) |
1.5.1
20 Sep 2013 23:17:32
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc) |
1.5.1
20 Sep 2012 08:53:46
|
rm |
- update to 1.5.1
- remove local patch
The only change in this release that it adds missing files to fix build.
PR: 171806
Submitted by: rm (myself)
Approved by: Dmitry Pryadko <d.pryadko at rambler-co dot ru> (maintainer) |
1.5
16 Sep 2012 11:57:36
|
rm |
- fix build
Reported by: portmgr (linimon)
Pointyhat to: rm (myself) |
1.5
15 Sep 2012 07:47:58
|
rm |
This module translates national characters into similar sounding latin
characters (transliteration). At the moment, Czech, Greek, Latvian, Polish,
Turkish, Russian, Ukrainian alphabets are supported (it covers 99% of needs).
WWW: http://pypi.python.org/pypi/trans
PR: 171322
Submitted by: Dmitry Pryadko <d.pryadko at rambler-co dot ru> |
As an Amazon Associate I earn from qualifying purchases.