15:22 Po-Chuan Hsieh (sunpoet) 

textproc/py-normality: Convert to USE_PYTHON=pytest

Approved by:	portmgr (blanket)
With hat:	python

    d4aa185

07:18 Charlie Li (vishwin) 

devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

    5d4139f

10:25 Kai Knoblich (kai) 

textproc/py-normality: Update to 2.5.0

Changelog:

https://github.com/pudo/normality/compare/2.4.0...2.5.0

    a7bc709

00:53 Charlie Li (vishwin) 

devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}

Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.

With hat: python
PR: 270510, 270358

    9a80a6e

19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

18:29 Antoine Brodin (antoine) 

USE_PYTHON=pep517: bump PORTREVISION

    1730e97

12:23 Kai Knoblich (kai) 

textproc/py-normality: Update to 2.4.0

* Switch back to PyPI as the sdist now contains the test suite.

* Remove no longer required patch.

* Switch to PEP517 build framework.

Changelog since 2.3.3:

https://github.com/pudo/normality/compare/2.3.3...2.4.0

MFH:		No (PEP517 support not present in 2023Q1)

    6b90f13

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

17:54 Kai Knoblich (kai)  Author: Dmitry Marakasov

textproc/py-normality: Update to 2.3.3

* Switch to new USES=pytest framework which fixes tests for py-normality
  and also py-fingerprints

* Rebase existing patch with additional reference to existing PR.

Changelog since 2.1.1:

https://github.com/pudo/normality/compare/2.1.1...2.3.3

PR:		263581

    20a79f0

01:17 Yasuhiro Kimura (yasu) 

*/*: Cleanup after the removal of lang/python36

* Remove codes that aren't necessary after the removal of lang/python36
* Mark ports that aren't necessary with Python 3.7 or later as
  DEPRECATED and set EXPIRATION_DATE.

PR:		261046
Approved by:	lwhsu (python)

    461373b

13:55 Dmitry Marakasov (amdmi3) 

Mk: switch PYTHON_REL to 5 digits to support python 3.10.x

PR:		255013
Differential Revision:	https://reviews.freebsd.org/D29418
Exp-run by:	antoine
Approved by:	wen@, no objection from python@ or portmgr@

    0729af4

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

12:12 kai 

textproc/py-normality: Update to 2.1.1

* Switch to GitHub for a while to make use of the test suite.

* Add default option ICU to reflect the requirements given in setup.py.

* Also add a workaround to avoid configure/build errors with Python < 3.7.

Changelog since 1.0.0:

https://github.com/pudo/normality/compare/1.0.0...2.1.1

 

09:49 kai 

devel/py-banal: Update to 1.0.1

* The support for Python < 3.5 was dropped with the 1.0.0 release, adapt
  accordingly and update the pkg-descr.

* Do the same for textproc/py-{fingerprints,normality} to avoid breakage of
  bulk -a .  Both consumers will soon be updated to a newer release which
  also no longer have any support for Python < 3.5.

Changelog since 0.4.2:

https://github.com/pudo/banal/compare/528c339b...1.0.1

 

15:38 kai 

textproc/py-normality: Update to 1.0.0

Changelog:

* Drop support for unidecode

Approved by:	mentors (implicit)

 

18:55 kai 

Change my maintainer email address to my new one at the FreeBSD project.

Reviewed by:	miwi (mentor)
Approved by:	miwi (mentor)
Differential Revision: https://reviews.freebsd.org/D19050

 

12:22 miwi 

Normality is a Python micro-package that contains a small set of text
normalization functions for easier re-use. These functions accept a snippet of
unicode or utf-8 encoded text and remove various classes of characters, such as
diacritics, punctuation etc. This is useful as a preparation to further text
analysis.

WWW: https://github.com/pudo/normality

PR:		229527
Submitted by:	freebsd_ports@k-worx.org
Sponsored by:	iXsystems Inc.