| non port: textproc/liblrdf/Makefile |
|
SVNWeb
|
Number of commits found: 55 |
|
Wed, 19 Oct 2022
|
[ 21:21 Daniel Engberg (diizzy)  ]    7bef32d
textproc/liblrdf: Update WWW and download from official repo
Point port to repo hosted on GitHub
Reference: https://sourceforge.net/projects/lrdf/
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:23 Tobias C. Berner (tcberner) ] 5cf7e35 (Only the first 10 of 1452 ports in this commit are shown above. )
textproc: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Choe, Cheng-Dae" whitekid
* -
* <glewis@FreeBSD.org>
* <koshy@india.hp.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron Straup Cope
* Aaron Straup Cope <ascope@cpan.org>
* Ache
* Adam Herzog <adam@herzogdesigns.com>
* Adam Weinberger <adamw@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 5 Oct 2018
|
[ 16:22 fernape ]  
textproc/liblrdf: update to 0.6.1
While here:
* Reorder some variables.
* Remove post-patch section
* Regenerate patch with makepatch
Accumulated change log:
* Remove a bogus symlink, and release some merged changes that resolve licence
issues.
* Removed more stale auto* files
Reported by: portscout
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D17422
|
|
Fri, 11 Nov 2016
|
[ 11:59 jbeich ]
textproc/liblrdf: drop unused dependencies
PR: 214384
Reported by: readelf(1)
|
|
Fri, 21 Oct 2016
|
[ 15:21 mat ] (Only the first 10 of 354 ports in this commit are shown above. )
Use USES=pathfix where applicable.
PR: 213195
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D8093
|
|
Sat, 24 Sep 2016
|
[ 11:06 tijl ] (Only the first 10 of 110 ports in this commit are shown above. )
- Update devel/icu to 57.1.
- Clean up the Makefile.
- Follow some upstream recommendations (--with-data-packaging=archive,
--disable-renaming, -DICU_NO_USER_DATA_OVERRIDE).
- Patch makefiles to install static libraries with INSTALL_DATA so they
aren't stripped.
- Patch config/mh-bsd-gcc to sync with config/mh-linux-gcc.
- Fix endianness detection in ICU. The code wanted to use BYTE_ORDER
defined in machine/endian.h, but this isn't visible because ICU is
compiled with _XOPEN_SOURCE. Patch the code to use _BYTE_ORDER instead.
- Compile ICU with C++11 compiler to enable move constructors.
- Patch ICU to fix a problem with atomics in the case of a C++11 compiler
without C++11 header <atomic> (like Clang on FreeBSD 9).
- Bump all ports that depend on it due to library version change.
- Add USES=compiler:c++0x to some ports that pick up -std=c++0x from ICU
pkgconfig files.
- Add USES=compiler:c++11-lib to graphics/libcdr01 because it also needs
a C++11 runtime library now. Add this to all ports that depend on it
so their executables load the right libstdc++.so on FreeBSD 9.
PR: 205120
Exp-run by: antoine
Approved by: portmgr (antoine)
|
|
Wed, 6 Jul 2016
|
[ 22:10 mat ] (Only the first 10 of 74 ports in this commit are shown above. )
Bump PORTREVISION for the icu revert.
This time not bumping lang/php70, but devel/php70-intl which is the one
really depending on icu.
PR: 205120
With hat: portmgr
Sponsored by: Absolight
|
[ 07:34 gahr ] (Only the first 10 of 64 ports in this commit are shown above. )
devel/icu: bump PORTREVISION on dependent ports
|
|
Fri, 1 Apr 2016
|
[ 14:25 mat ] (Only the first 10 of 2099 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 14 May 2015
|
[ 10:15 mat ] (Only the first 10 of 1814 ports in this commit are shown above. )
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
|
|
Mon, 11 May 2015
|
[ 03:39 amdmi3 ]
- Add LICENSE
- Strip library
|
|
Thu, 23 Apr 2015
|
[ 21:26 bapt ] (Only the first 10 of 57 ports in this commit are shown above. )
Update icu to 55.1
|
|
Sun, 19 Apr 2015
|
[ 08:42 tijl ]
The distfile contains symlinks to non-existent system files. Remove them
so autoreconf works.
Reported by: antoine
|
|
Sat, 18 Apr 2015
|
[ 12:58 tijl ] (Only the first 10 of 22 ports in this commit are shown above. )
Convert to USES=autoreconf
|
|
Thu, 3 Jul 2014
|
[ 09:55 tijl ]
- Add USE_AUTOTOOLS=autoheader and USES=libtool
- Remove PTHREAD_CFLAGS and PTHREAD_LIBS
|
|
Wed, 16 Apr 2014
|
[ 18:28 zeising ] (Only the first 10 of 1008 ports in this commit are shown above. )
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 14 Feb 2014
|
[ 14:59 miwi ]
- Stage support
|
|
Fri, 7 Feb 2014
|
[ 11:44 bapt ] (Only the first 10 of 229 ports in this commit are shown above. )
Chase boost and icu bump
While here convert some LIB_DEPENDS
|
|
Fri, 20 Sep 2013
|
[ 23:17 bapt ] (Only the first 10 of 1559 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)
|
|
Tue, 16 Jul 2013
|
[ 05:42 ade ] (Only the first 10 of 51 ports in this commit are shown above. )
- Update devel/automake to 1.14
- Update devel/gettext to 0.18.3
- Fix known-broken (from exp-runs) ports
- Clean up a lot of cruft in the devel/gettext port itself,
based on work from tijl@
PR: 178883
Submitted by: ade
Sponsored by: Wadsworth 6X
|
|
Thu, 11 Jul 2013
|
[ 16:26 sunpoet ] (Only the first 10 of 252 ports in this commit are shown above. )
- Update to 7.31.0
- Bump PORTREVISION for ftp/curl shlib change
- Add TEST_DEPENDS
- Convert to new options framework
- Adjust options:
- Add COOKIES
- Add CYASSL, NSS, POLARSSL, THREADED_RESOLVER, TLS_SRP [1]
- Add GSSAPI and SPNEGO [2]
- Remove KERBEROS4
- Rename LIBIDN to IDN
- Remove TRACKMEMORY [1]
- Sort option handler
- Add SLAVEDIRS: ftp/curl-hiphop
- Cosmetic change
- Cleanup Makefile header
- While I'm here, fix typo (PORTREVSION) in x11-wm/ede/Makefile
Changes: http://curl.haxx.se/changes.html
PR: ports/172325 (-exp run), ports/177369 (based on) [1]
Submitted by: Hirohisa Yamaguchi <umq@ueo.co.jp> [1], hrs (via email) [2]
Exp run by: miwi
|
|
Sat, 27 Apr 2013
|
[ 18:25 mva ] (Only the first 10 of 181 ports in this commit are shown above. )
- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig and
USE_GETTEXT=yes to USES=gettext while here
|
|
Tue, 23 Apr 2013
|
[ 14:20 bapt ] (Only the first 10 of 407 ports in this commit are shown above. )
Finish converting the whole ports tree to USES=pkgconfig
|
|
Fri, 29 Mar 2013
|
[ 21:57 eadler ]
Fix build
Reported by: bdrewery
|
|
Thu, 28 Mar 2013
|
[ 03:28 eadler ] (Only the first 10 of 149 ports in this commit are shown above. )
Mechanically convert unmaintained ports which use "gnomehack" to use "pathfix"
instead.
|
|
Thu, 20 Dec 2012
|
[ 20:02 pawel ]
- Bump after devel/icu update
- Add missing deps, pkg-config is required during build
- Fix typo in pkg-descr
|
|
Wed, 22 Aug 2012
|
[ 21:55 rakuco ]
Make the port build if textproc/raptor is installed.
Both textproc/raptor and textproc/raptor2 provide a raptor.h header; the
former puts it in ${LOCALBASE}/include, whereas the latter puts it into
${LOCALBASE}/include/raptor2.
The way CPPFLAGS and LDFLAGS were changed so far, -I${LOCALBASE}/include was
passed to the compiler before -I${LOCALBASE}/include/raptor2, so the raptor1
headers were picked up and the build failed.
The fix is consists of several separate adjustments:
- The port only depends on raptor2 (and obtains the required compiler and
linker flags via pkg-config) and optionally on OpenSSL from ports in
case one has installed it.
We thus need USE_OPENSSL and OPENSSLINC/OPENSSLLIB.
- Due to the other the CFLAGS are defined in the port's configure.ac, we
need to make raptor2's CFLAGS be passed before the rest, so
-I${LOCALBASE}/include/raptor2 is passed to the compiler before other
paths such as the infamous ${LOCALBASE}/include.
- We need to change CFLAGS instead of CPPFLAGS, otherwise the OpenSSL
CFLAGS still come before the actual CFLAGS and the problem persists.
|
|
Mon, 20 Aug 2012
|
[ 08:47 danfe ]
- Update to latest github snapshot (tagged 0.5.0; fetch distfile from Gentoo)
and switch to textproc/raptor2 (required for upcoming audio/ardour update)
- Do some small Makefile cleanups and touch port description while I am here
- Teach configure script of audio/aqualung to use `pkg-config --cflags lrdf`,
so it can always find correct headers
Submitted by: nox@ (a while ago)
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Thu, 11 Aug 2011
|
[ 19:20 kwm ] (Only the first 10 of 543 ports in this commit are shown above. )
Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.
PR: ports/159624
Submitted by: Ruslan Mahmatkhanov <cvs-src@yandex.ru>
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Tue, 11 May 2010
|
[ 12:23 fluffy ] (Only the first 10 of 21 ports in this commit are shown above. )
- Split redland to rasqal and redland itself libraries
- Update raptor to 1.4.21
- Update rasqal to 0.9.19
- Update redland to 1.0.10
- Update redland-bindings to 1.0.10.1
- Bump portrevision on depended ports
With hat on: kde@
|
|
Sat, 22 Aug 2009
|
[ 00:37 amdmi3 ] (Only the first 10 of 140 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with T,U,V
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Sun, 28 Jan 2007
|
[ 09:07 kris ] (Only the first 10 of 103 ports in this commit are shown above. )
Use libtool port instead of included one to avoid objformat a.out botch
|
|
Tue, 15 Aug 2006
|
[ 01:04 clsung ] (Only the first 10 of 49 ports in this commit are shown above. )
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include security/ sysutils/ textproc/ maintained by ports@
PR: ports/101916
Submitted by: Gea-Suan Lin <gslin_AT_gslin dot org>
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Tue, 3 May 2005
|
[ 09:07 krion ]
Update to version 0.4.0
PR: ports/80545
Submitted by: Ports Fury
|
|
Thu, 15 Jul 2004
|
[ 16:46 krion ]
- Update to version 0.3.7
PR: ports/69116
Submitted by: Ports Fury
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Mon, 5 Apr 2004
|
[ 03:31 marcus ] (Only the first 10 of 575 ports in this commit are shown above. )
Chase the glib20 update, and bump all affected ports' PORTREVISIONs.
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Sat, 28 Feb 2004
|
[ 16:07 arved ]
Rearrange USE_GNOME
Don't install .la file
PR: 63499
Submitted by: KATO Tsuguru
|
[ 10:15 arved ]
Update to 0.3.5
Drop Maintainership
|
|
Wed, 4 Feb 2004
|
[ 05:10 marcus ] (Only the first 10 of 1422 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
|
|
Sat, 3 Jan 2004
|
[ 00:06 pav ]
- Chase raptor shlib version raise.
|
|
Fri, 31 Oct 2003
|
[ 10:01 arved ]
Update to 0.3.2
|
|
Mon, 20 Oct 2003
|
[ 19:50 arved ]
Chase shlib version of raptor
Forgotten by: krion
|
|
Sun, 27 Jul 2003
|
[ 23:24 arved ]
Update to 0.3.1
|
|
Sun, 4 May 2003
|
[ 17:45 arved ]
Add build dependency on LADSPA
Submitted by: bento
|
|
Fri, 2 May 2003
|
[ 10:18 arved ]
Add ${PTHREAD_LIBS}
Submitted by: ydg <ydg@cox.net>
|
|
Sun, 27 Apr 2003
|
[ 14:27 arved ]
Add liblrdf, a library for manipulating RDF files describing LADSPA plugins.
|
Number of commits found: 55 |
As an Amazon Associate I earn from qualifying purchases.