Chase editors/emacs update

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths
- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D44492

*/*: Chase editors/emacs update

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths

- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D43615

editors/emacs: Update to 29.1

* Update Canna patch to the one for Emacs 29.
* Add new options PGTK, SQLITE3, TREESITTER and WEBP. SQLITE3 and
  TREESITTER are ON by default. PGTK and WEBP options are excluded
  from nox flavor.
* CARGO option doesn't imply XFT but prevents it. It is caused as a
  result of adding pure GTK support (PGTK option).
* OTK options doesn't imply XTF any more. It is also caused as a
  result of adding pure GTK support.
* Update NATIVECOMP option so it specifies ahead-of-time compilation
  via the configure argument.
* Remove "experimental" from NATIVECOMP_DESC.
* Add print/freetype2 and x11-fonts/fontconfig to CAIRO_LIB_DEPENDS
  and GTK3_LIB_DEPENDS. Necessary to link emacs binary with shared

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

editors/emacs-devel: Update to 2022-11-28 snapshot

Bump PORTREVISION of consumers as EMACS_VER is changed to 30.0.50.

Changes:	https://github.com/emacs-mirror/emacs/compare/51589f81...7939184f

editors/emacs: Update to 28.2

* Remove FCITXPATCH option as extra-patch-src_xfns.c can't be applied
  since 28.1.
* Tidy up Makefile with portfmt.
* Bump PORTREVISION of consumers.

ChangeLog:	https://www.gnu.org/software/emacs/news/NEWS.28.2

PR:		266454
Exp-run by:	antoine
Reviewed by:	ashish, jrm
Differential Revision:	https://reviews.freebsd.org/D36613

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

textproc: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  -
  *  <glewis@FreeBSD.org>
  *  <koshy@india.hp.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron Straup Cope
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Ache
  *  Adam Herzog <adam@herzogdesigns.com>
  *  Adam Weinberger <adamw@FreeBSD.org>

Emacs ports: Bump PORTREVISION after Emacs 28.1

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D34781

USES=emacs: Chase package name changes

PR:		259259
Differential Revision:	https://reviews.freebsd.org/D32613

*: Chase new major version (29) of editors/emacs-devel

Differential Revision:	https://reviews.freebsd.org/D32258

Remove # $FreeBSD$ from Makefiles.

editors/emacs: Update to 27.2

This is a bug-fix release with no new features.

https://www.gnu.org/software/emacs/news/NEWS.27.2

Reviewed by:	ashish
Differential Revision:	https://reviews.freebsd.org/D27700

editors/emacs: Update to version 27.1

Please refer to the 20200811 UPDATING entry when upgrading
dependent (*-emacs26-*) ports.

Port changes:

- depend on math/gmp
- match upstream by turning CAIRO, HARFBUZZ, and JSON options and on and
  turning MAGICK off by default
- remove OPENMP check for graphics/ImageMagick as the openmp is now
  included in base
- update EMACS_VER in Mk/Uses/emacs.mk
- bump USES=emacs ports or remove BROKEN for net-im/jabber.el and
  deskutils/howm, which now build

Submitted by:	HIROSE Yuuji <yuuji@gentei.org> (canna patch)
Reviewed by:	ashish
Differential Revision:	https://reviews.freebsd.org/D23966

Sanitize COMMENT per Section 5.6 of the FreeBSD Porter's Handbook (part 4).

editors/emacs-devel: Update to latest master branch commit, 4f2b415

This update includes an Emacs major version change from 27.0.50 to 28.0.50.
Ports that may depend on editors/emacs-devel must chase this update
with a PORTREVISION bump.

Submitted by:	ashish (maintainer)
Differential Revision:	https://reviews.freebsd.org/D23012

Bump PORTREVISION for more ports using EMACS_VERSION_SITE_LISPDIR

This is required after editors/emacs was updated to version 26.3 in
r510281.  Some of these ports were missed in r510696.

USES=emacs ports: Bump PORTREVISION for editors/emacs 26.1 upgrade

Or, mark ports that fail to build as BROKEN.
https://lists.freebsd.org/pipermail/freebsd-ports/2018-May/113518.html

Flavorize and modernize Emacs ports

- Convert USE_EMACS to USES=emacs
- Remove editors/emacs-nox11 (refer to nox flavors of editors/emacs and
  editors/emacs-devel)
- Permit default Emacs flavor to be specified in make.conf
- Rename japanese/migemo-emacs23 to japanese/migemo-emacs
- Update and simplify audio/emms and fix build on FreeBSD 10 [1]
- Update databases/bbdd and fix build on FreeBSD 10 [1]
- Update editors/emacs-devel
- Ensure Makefile shell commands that change directory are executed in a
  subshell
- Silence some portlint warnings

[1] By not depending on base texinfo

PR:		225404
Reviewed by:	antoine
Approved by:	portmgr (mat) ashish (maintainer)
Differential Revision:	https://reviews.freebsd.org/D13506

Chase Emacs update

Chase editors/emacs update to version 25.2

Reported by:	des
Approved by:	ashish (emacs maintainer), swills (mentor, implicit)
Differential Revision:	https://reviews.freebsd.org/D10534

Update WWW: SF redirects to https://sourceforge.net/projects/<PROJECT_NAME>/

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

- Switch to options helpers
- Add some NO_ARCHes
- Fix and unsilence some installation commands
- Other minor fixes

Approved by:	portmgr blanket

- Chase GNU Emacs updates

PR:		199553

cleanup plist

- Chase GNU Emacs updates

PR:		194624

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

textproc/dictem: fix textproc/dictem-xemacs21-mule slave port build

- Fix textproc/dictem-xemacs21-mule slave port build
- Add LICENSE (GPLv2)
- Allow staging

PR:		ports/184125
Submitted by:	maintainer

Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)

- Update to 1.0.4
- Trim Makefile headers
- Update maintainer's email
- Convert to optionsNG

PR:		181424
Submitted by:	"Max N. Boyarov" <m.boyarov@gmail.com> (maintainer)

GNU Emacs updates

editors/emacs:
 - Update to 24.3
 - Update CANNA patchset[1]
 - Unbreak ARM support by using the patch from emacs-devel port
 - Add missing INSTALLS_ICONS[2]
 - Remove a patch which is already integrated upstream
 - Fix Makefile header

editors/emacs-devel:
 - Update to bzr revision 112178
 - Fix Makefile header
 - Add missing INSTALLS_ICONS[2]

Chase Emacs updates

- Bump PORTREVISION to chase Emacs port updates
- Unbreak INDEX caused by databases/lsdb, editors/flim, and editors/semi

- update png to 1.5.10

- Chase Emacs updates

PR:             ports/165082

- Chase editors/emacs update

Chase editors/emacs update

Chase editors/emacs update.

PR:             ports/160196

-remove MD5

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Changes to editors/emacs and Mk/bsd.emacs.mk were taken from
PR/137956 by Ashish SHUKLA (thanks!).  [1]

Those ports which define EMACS_PORT_NAME to be "emacs21" were
not touched (this time). They may be converted to the new
world order by removing the above mentioned assignment.

Four ports were marked as BROKEN with EMACS_PORT_NAME=emacs23
(they do not compile):
. lang/bigloo;
. mail/wanderlust;
. mail/wanderlust-devel;
. www/emacs-w3m.

Three ports were marked as IGNORE with EMACS_PORT_NAME=emacs23:

- Update to 1.0.2
- Change maintainer's email address

PR:             139987
Submitted by:   Max N. Boyarov <m.boyarov@gmail.com> (maintainer)

- Switch SourceForge ports to the new File Release System: categories starting
with T,U,V

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update to 1.0.0

Submitted by:   maintainer via email

Fix patched Makefile

[maintainer update] textproc/dictem: Upgrade to use system default Emacs

        Remove EMACS_PORT_NAME to use system default emacs version
        Note: to avoid conflicts please remove dictem-emacs22 port first.

PR:             ports/117580
Submitted by:   Max N. Boyarov <m.boyarov@bsd.by>

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Fix WRKSRC.

Submitted by:   maintainer

- Update to version 0.81
- Update project WWW

PR:             ports/101368
Submitted by:   Max N. Boyarov (maintainer)

- Update to 0.8

Submitted by:   Max N. Boyarov (maintainer)

Change maintainer email address to <m.boyarov@bsd.by>

Submitted by:   Max N. Boyarov (maintainer)

Add new mastersite.

Submitted by:   Max N. Boyarov - maintainer(via PM)

Add dictem: DictEm is a dict client for [X]Emacs.

Submitted by:   Max N. Boyarov <m.boyarov@gmail.com>