| Port details on branch 2022Q2 |
- u-boot-wandboard Cross-build das u-boot for model wandboard
- 2024.01 sysutils
 =1      2022.04_1Version of this port present on the latest quarterly branch. - Maintainer: uboot@FreeBSD.org
- Port Added: 2014-12-09 20:09:09
- Last Update: 2022-09-10 17:41:16
- Commit Hash: e79fe1a
- People watching this port, also watch:: python, unoconv, py39-pycparser, sysinfo
- License: GPLv2
- WWW:
- https://www.denx.de/wiki/U-Boot
- Description:
- U-Boot loader for Wandboard Solo, Dual, and Quad.
Install the u-boot.imx file onto the boot disk using:
dd if=u-boot.imx of=/dev/whatever bs=1k oseek=1 conv=sync
The U-Boot built by this port expects the first 1MB of the boot media to
be reserved for the U-Boot executable and saved environment. The u-boot.imx
file begins at an offset of 1K from the start of the boot disk. The U-Boot
environment area begins at an offset of 512K.
This version is patched so that:
* ELF and API features are enabled to support ubldr.
* A single U-Boot image supports Solo, Dual[lite], and Quad processors.
* When the selected board has multiple SD or MMC devices available, the
mmc0 device in U-Boot (and thus the disk0 device in loader(8)) will be
whichever device U-Boot was loaded from by the ROM bootloader routines.
The sources for this port were originally obtained from commit 87f595d1ee
at https://github.com/TechNexion/U-Boot-edm/ which appears to be a slightly
modified fork of the stock U-Boot 2013.10 release. As of this writing,
the changes in this fork have not been rolled back into upstream U-Boot.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- u-boot-wandboard>0:sysutils/u-boot-wandboard
- To install the port:
- cd /usr/ports/sysutils/u-boot-wandboard/ && make install clean
- To add the package, run one of these commands:
- pkg install sysutils/u-boot-wandboard
- pkg install u-boot-wandboard
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: u-boot-wandboard
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1704888643
SHA256 (u-boot/u-boot-2024.01.tar.bz2) = b99611f1ed237bf3541bdc8434b68c96a6e05967061f992443cb30aabebef5b3
SIZE (u-boot/u-boot-2024.01.tar.bz2) = 19926911
Packages (timestamps in pop-ups are UTC):
- Master port: sysutils/u-boot-master
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- gsed : textproc/gsed
- swig : devel/swig
- dtc>=1.4.1 : sysutils/dtc
- mkimage : sysutils/u-boot-tools
- py39-setuptools-pkg>=0 : devel/py-setuptools-pkg@py39
- arm-none-eabi-gcc : devel/arm-none-eabi-gcc
- e2fsprogs-libuuid>=0 : misc/e2fsprogs-libuuid
- gnutls>=0 : security/gnutls
- bison : devel/bison
- gmake>=4.3 : devel/gmake
- python3.9 : lang/python39
- pkgconf>=1.3.0_1 : devel/pkgconf
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- sysutils_u-boot-wandboard
- USES:
- bison gmake python:build pkgconfig shebangfix tar:bz2
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
As an Amazon Associate I earn from qualifying purchases.