notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Want a good monitor light? See my photosAll times are UTC
Ukraine
This referral link gives you 10% off a Fastmail.com account and gives me a discount on my Fastmail account.

Get notified when packages are built

A new feature has been added. FreshPorts already tracks package built by the FreeBSD project. This information is displayed on each port page. You can now get an email when FreshPorts notices a new package is available for something on one of your watch lists. However, you must opt into that. Click on Report Subscriptions on the right, and New Package Notification box, and click on Update.

Finally, under Watch Lists, click on ABI Package Subscriptions to select your ABI (e.g. FreeBSD:14:amd64) & package set (latest/quarterly) combination for a given watch list. This is what FreshPorts will look for.

Port details
py-pupynere NetCDF file reader and writer
1.0.15_9 science on this many watch lists=0 search for ports that depend on this port Find issues related to this port Report an issue related to this port View this port on Repology. pkg-fallout 1.0.15_9Version of this port present on the latest quarterly branch.
Maintainer: sunpoet@FreeBSD.org search for ports maintained by this maintainer
Port Added: 2013-09-02 11:27:57
Last Update: 2023-06-27 19:34:34
Commit Hash: 3d9a815
Also Listed In: python
License: MIT
WWW:
https://bitbucket.org/robertodealmeida/pupynere
Description:
Pupynere is a Python module for reading and writing NetCDF files, using the same API as Scientific.IO.NetCDF and pynetcdf. It depends only on Numpy, so you don't need to have the NetCDF library installed. See also: https://pypi.org/project/pupynere/
Homepage    cgit ¦ Codeberg ¦ GitHub ¦ GitLab ¦ SVNWeb

Manual pages:
FreshPorts has no man page information for this port.
pkg-plist: as obtained via: make generate-plist
There is no configure plist information for this port.
Dependency lines:
  • ${PYTHON_PKGNAMEPREFIX}pupynere>0:science/py-pupynere@${PY_FLAVOR}
To install the port:
cd /usr/ports/science/py-pupynere/ && make install clean
To add the package, run one of these commands:
  • pkg install science/py-pupynere
  • pkg install py39-pupynere
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-pupynere listed in the above command, you can pick from the names under the Packages section.
PKGNAME: py39-pupynere
Package flavors (<flavor>: <package>)
  • py39: py39-pupynere
distinfo:
SHA256 (pupynere-1.0.15.tar.gz) = b759b501406c950b576de1880f1dc080e05536ae42299267093e2379dac9086d SIZE (pupynere-1.0.15.tar.gz) = 8566

Packages (timestamps in pop-ups are UTC):
py39-pupynere
ABIaarch64amd64armv6armv7i386powerpcpowerpc64powerpc64le
FreeBSD:13:latest1.0.15_91.0.15_9-1.0.15_91.0.15_9---
FreeBSD:13:quarterly1.0.15_91.0.15_9--1.0.15_9-1.0.15_9-
FreeBSD:14:latest1.0.15_91.0.15_9-1.0.15_91.0.15_9---
FreeBSD:14:quarterly1.0.15_91.0.15_9--1.0.15_9-1.0.15_9-
FreeBSD:15:latest1.0.15_91.0.15_9n/a1.0.15_9n/a-1.0.15_91.0.15_9
FreeBSD:15:quarterly--n/a-n/a---
Dependencies
NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
Build dependencies:
  1. py39-setuptools>=63.1.0 : devel/py-setuptools@py39
  2. python3.9 : lang/python39
Test dependencies:
  1. python3.9 : lang/python39
Runtime dependencies:
  1. py39-numpy>=0,1 : math/py-numpy@py39
  2. py39-setuptools>=63.1.0 : devel/py-setuptools@py39
  3. python3.9 : lang/python39
There are no ports dependent upon this port

Configuration Options:
No options to configure
Options name:
science_py-pupynere
USES:
python
FreshPorts was unable to extract/find any pkg message
Master Sites:
Expand this list (2 items)
Collapse this list.
  1. https://files.pythonhosted.org/packages/source/p/pupynere/
  2. https://pypi.org/packages/source/p/pupynere/
Collapse this list.

Number of commits found: 28

Commit History - (may be incomplete: for full details, see links to repositories near top of page)
CommitCreditsLog message
1.0.15_9
27 Jun 2023 19:34:34
commit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacbcommit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacbcommit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacbcommit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacb files touched by this commit
Rene Ladan (rene) search for other commits by this committer
all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>
1.0.15_9
23 Apr 2023 09:09:58
commit hash: 8d3e020ed032a8db00208994d0db646de7dc6f5bcommit hash: 8d3e020ed032a8db00208994d0db646de7dc6f5bcommit hash: 8d3e020ed032a8db00208994d0db646de7dc6f5bcommit hash: 8d3e020ed032a8db00208994d0db646de7dc6f5b files touched by this commit
Gerald Pfeifer (gerald) search for other commits by this committer
*: Bump PORTREVISIONs for math/mpc update to 1.3.1
1.0.15_8
11 Jan 2023 15:58:34
commit hash: 77d68471aded6907dbbcb5ef50d557e4c69db656commit hash: 77d68471aded6907dbbcb5ef50d557e4c69db656commit hash: 77d68471aded6907dbbcb5ef50d557e4c69db656commit hash: 77d68471aded6907dbbcb5ef50d557e4c69db656 files touched by this commit
Dmitry Marakasov (amdmi3) search for other commits by this committer
*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt
07 Sep 2022 21:58:51
commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4 files touched by this commit
Stefan Eßer (se) search for other commits by this committer
Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)
1.0.15_8
07 Sep 2022 21:10:59
commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52 files touched by this commit
Stefan Eßer (se) search for other commits by this committer
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
1.0.15_8
20 Jul 2022 14:22:51
commit hash: 46196047a4df0f85aaee442799209fdaacf03361commit hash: 46196047a4df0f85aaee442799209fdaacf03361commit hash: 46196047a4df0f85aaee442799209fdaacf03361commit hash: 46196047a4df0f85aaee442799209fdaacf03361 files touched by this commit
Tobias C. Berner (tcberner) search for other commits by this committer
science: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Andreas Fehlner <fehlner@gmx.de>
  *  Brad Huntting <huntting@glarp.com>
  *  Chao Shin <quakelee@cn.FreeBSD.org>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Chia-Hsing Yu <me@davidyu.org>
  *  Chris Rees <utisoft@gmail.com>
  *  David Naylor <dbn@FreeBSD.org>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Ed Schouten <ed@FreeBSD.org>
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Erik B Knudsen
(Only the first 15 lines of the commit message are shown above View all of this commit message)
1.0.15_8
05 Nov 2021 19:14:24
commit hash: 0d3a1b3c65084559979601cbc9bf6519da456751commit hash: 0d3a1b3c65084559979601cbc9bf6519da456751commit hash: 0d3a1b3c65084559979601cbc9bf6519da456751commit hash: 0d3a1b3c65084559979601cbc9bf6519da456751 files touched by this commit
Po-Chuan Hsieh (sunpoet) search for other commits by this committer
science/py-pupynere: Update USES=python

math/py-numpy requires Python 3.7+
1.0.15_8
18 Apr 2021 05:44:05
commit hash: b798dd98f6391719d193b7561986aa7115bd71edcommit hash: b798dd98f6391719d193b7561986aa7115bd71edcommit hash: b798dd98f6391719d193b7561986aa7115bd71edcommit hash: b798dd98f6391719d193b7561986aa7115bd71ed files touched by this commit
Po-Chuan Hsieh (sunpoet) search for other commits by this committer
science/py-pupynere: Remove PYNUMPY
1.0.15_8
06 Apr 2021 14:31:07
commit hash: 305f148f482daf30dcf728039d03d019f88344ebcommit hash: 305f148f482daf30dcf728039d03d019f88344ebcommit hash: 305f148f482daf30dcf728039d03d019f88344ebcommit hash: 305f148f482daf30dcf728039d03d019f88344eb files touched by this commit
Mathieu Arnold (mat) search for other commits by this committer
Remove # $FreeBSD$ from Makefiles.
1.0.15_8
28 Dec 2020 23:02:15
Revision:559531Original commit files touched by this commit
antoine search for other commits by this committer
Drop python 2.7 support from a few ports

With hat:	portmgr
1.0.15_8
26 Jul 2019 20:46:57
Revision:507372Original commit files touched by this commit
gerald search for other commits by this committer
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330
1.0.15_7
12 Dec 2018 01:35:36
Revision:487272Original commit files touched by this commit
gerald search for other commits by this committer
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590
1.0.15_6
25 Apr 2018 16:42:38
Revision:468282Original commit files touched by this commit
amdmi3 search for other commits by this committer
Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.

Approved by:	portmgr blanket, mat
1.0.15_6
10 Mar 2018 17:46:06
Revision:464084Original commit files touched by this commit
gerald search for other commits by this committer
Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).
1.0.15_5
25 Feb 2018 05:34:13
Revision:462930Original commit files touched by this commit
sunpoet search for other commits by this committer
Relax USES=python

- Update COMMENT
- Remove BUILD_DEPENDS
- Add NO_ARCH
- Allow concurrent installation (USE_PYTHON=concurrent)
- Add PyPI as primary WWW
- Update WWW
- Take maintainership
1.0.15_5
24 Feb 2018 08:52:27
Revision:462775Original commit files touched by this commit
tcberner search for other commits by this committer
Give xmj@'s ports back to the pool

PR:		226157
Submitted by:	xmj
1.0.15_5
19 Feb 2018 11:10:43
Revision:462307Original commit files touched by this commit
antoine search for other commits by this committer
Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA
1.0.15_4
23 Jun 2016 09:48:53
Revision:417356Original commit files touched by this commit
tz search for other commits by this committer
Change all occurrences of xmj@chaot.net to johannes@perceivon.net as the owner
requested.

This only affects "Created by" lines with one exception: devel/uclcmd. There the
maintainer is changed. This was overlooked in r416918.

Approved by: junovitch (mentor)
1.0.15_4
15 Jun 2016 09:04:29
Revision:416918Original commit files touched by this commit
tz search for other commits by this committer
Change MAINTAINER from xmj@FreeBSD.org to johannes@perceivon.net

PR:           210265
Submitted by: Johannes Jost Meixner (johannes@perceivon.net)
Approved by:  pi (mentor)
1.0.15_4
25 May 2016 16:54:31
Revision:415848Original commit files touched by this commit
pi search for other commits by this committer
Several ports: Change MAINTAINER from xmj@chaot.net to xmj@FreeBSD.org

PR:		209746
Submitted by:	xmj
1.0.15_4
24 Oct 2014 16:50:43
Revision:371453Original commit files touched by this commit
mva search for other commits by this committer
- Convert ports of science/ and security to new USES=python

Approved by:	portmgr (implicit)
1.0.15_4
10 Sep 2014 20:50:37
Revision:367888Original commit files touched by this commit
gerald search for other commits by this committer
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)
1.0.15_3
10 Mar 2014 20:55:22
Revision:347809Original commit files touched by this commit
gerald search for other commits by this committer
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)
1.0.15_2
03 Feb 2014 11:35:54
Revision:342428Original commit files touched by this commit
koobs search for other commits by this committer
science/py-pupynere: Modernise: Enable STAGE, AUTOPLIST and more

- Stagify
- Use PYDISTUTILS_AUTOPLIST, remove pkg-plist
- Kill easy_install with fire!
- Remove patch to setup.py

PR:		ports/186366
Submitted by:	Johannes Jost Meixner <xmj@chaot.net>
1.0.15_1
13 Jan 2014 21:00:04
Revision:339634Original commit files touched by this commit
rene search for other commits by this committer
Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)
1.0.15_1
26 Oct 2013 00:52:36
Revision:331644Original commit files touched by this commit
gerald search for other commits by this committer
Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
(Only the first 15 lines of the commit message are shown above View all of this commit message)
1.0.15
20 Sep 2013 22:48:31
Revision:327767Original commit files touched by this commit
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
science)
1.0.15
02 Sep 2013 11:27:42
Revision:325976Original commit files touched by this commit
koobs search for other commits by this committer
science/py-pupynere: Module for reading and writing NetCDF files [NEW PORT]

Pupynere is a Python module for reading and writing NetCDF files, using the same
API as Scientific.IO.NetCDF and pynetcdf. It depends only on Numpy, so you don't
need to have the NetCDF library installed.

WWW: https://pypi.python.org/pypi/pupynere/

PR:		ports/179744
Submitted by:	Johannes Jost Meixner <xmj@chaot.net>

Number of commits found: 28