22:05 sunpoet 

Update science/hdf5 to 1.10.2

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://portal.hdfgroup.org/display/support/HDF5%201.10.2#releasenotes
		https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.10/hdf5-1.10.2/src/hdf5-1.10.2-RELEASE.txt
PR:		231009
Exp-run by:	antoine

 

17:46 gerald 

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

 

20:55 thierry 

Chase metis-edf's upgrade.

 

02:56 sunpoet 

Update science/hdf5 to 1.10.1

- Bump PORTREVISION for shlib change

Changes:	https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.10/hdf5-1.10.1/src/hdf5-1.10.1-RELEASE.txt

 

15:43 mat 

Remove useless WRKSRC definitions.

While there, correct DEV_WARNINGS when they occur.

Sponsored by:	Absolight

 

20:42 sunpoet 

- Update to 1.10.0
- Add LICENSE_FILE
- Remove outdated PORTSCOUT
- Re-enable SZIP option by default: it was changed unintentionally in r398300

Changes:	https://www.hdfgroup.org/ftp/HDF5/releases/hdf5-1.10/hdf5-1.10.0/src/hdf5-1.10.0-RELEASE.txt
		https://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

 

14:25 mat 

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

 

08:10 sunpoet 

- Update to 1.8.15
- Bump PORTREVISION for science/hdf5 shlib change

Changes:	http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.15-RELEASE.txt
		http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

 

17:31 thierry 

Upgrade ncs to 2.0.8 with its dependencies.

 

22:07 thierry 

Fix with on FreeBSD-8.x and 9.x: stdint.h is needed with scotch.

 

22:17 marino 

3 ports categories: Remove $PTHREAD_LIBS

Categories: print, science, emulators

approved by:	PTHREAD blanket

 

10:39 sunpoet 

- Update to 1.8.14
- Update MASTER_SITES
- Use INSTALL_TARGET=install-strip instead of
MAKE_ENV=INSTALL_STRIP_FLAG=${STRIP}
- Bump PORTREVISION for science/hdf5 shlib change

Changes:	http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.14-RELEASE.txt
		http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

 

14:42 thierry 

Upgrade to version 2.0.3.

PR:		ports/193296
Submitted by:	pfg

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

21:57 bapt 

Fix build with texlive

 

00:55 sunpoet 

- Update to 1.8.12 (from science/hdf5-18)
- Add LICENSE
- Convert to new LIB_DEPENDS format
- Convert to new options helper
- Use NOT_FOR_ARCHS
- Strip shared library
- Remove deprecated PTHREAD_*
- Use MAKE_CMD
- Bump PORTREVISION for science/hdf5 shlib change [1]

Changes:	http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.12-RELEASE.txt
		http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
Approved by:	portmgr (bapt) [1]

 

20:31 thierry 

- Upgrade cgnslib to 3.2.1
  Changelog at <https://sourceforge.net/projects/cgns/files/cgnslib_3.2/>

- Bump PORTREVISION of consumers ports.

 

23:29 thierry 

- Unbreak Code_Saturne;

- Adapt to the new infrastructure.

Note: these ports should be upgraded - this is on my todo list.

 

20:55 gerald 

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

 

17:01 bapt 

Convert s* to USES=zip

 

13:39 ehaupt 

Remove trailing whitespaces from category science

 

13:54 ehaupt 

According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.

This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.

Approved by:    portmgr (bapt)

 

00:52 gerald 

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

 

22:48 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
science)

 

14:40 bapt 

WITHOUT_NLS -> PORT_OPTIONS:MNLS
NOPORTDOCS -> PORT_OPTIONS:MDOCS
NOPORTEXAMPLES -> PORT_OPTIONS:MEXAMPLES

 

17:58 hrs 

Rectify USE_TEX to support both of teTeX and TeXLive.

TEX_DEFAULT:
	A knob to choose teTeX or TeXLive.  One can specify in /etc/make.conf.

USE_TEX:
	A knob for port developers.  Valid keywords are listed in
	bsd.tex.mk.

 

02:00 hrs 

Remove *_DEPENDS from ports which depend on teTeX and add USE_TEX=tetex
instead to make migration to TeXLive easier.

 

18:25 mva 

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig and
  USE_GETTEXT=yes to USES=gettext while here

 

18:10 ak 

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

 

20:35 thierry 

Chase french/med upgrade.

 

11:11 bf 

add math/metis4 to math/Makefile; update math/metis to 5.0.2; add appropriate
CONFLICTS, LATEST_LINK, and PORTSCOUT; adjust dependent ports; explicitly
note the restrictive license of the metis ports (while here, append the MPI port
to
*DEPENDS in math/parmetis, rather than using an assignment)

PR:             169578

15:15 thierry 

Upgrade Code_Saturne to 2.0.

05:26 dinoex 

- update png to 1.5.10

07:00 sunpoet 

- Bump PORTREVISION for science/hdf5-18 shlib change

10:23 thierry 

Chase the upgrade of science/cgnslib to 2.5-5; this implies to
switch some dependencies from science/hdf5 to science/hdf5-18.

As a side note: I think that all ports depending on science/hdf5
could be switched to science/hdf5-18, by defining H5_USE_16_API
when necessary, and then science/hdf5 could be deprecated.

PR:             ports/154736

02:01 ade 

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

17:52 thierry 

Upgrade to 1.3.3.

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

13:59 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

22:14 thierry 

Upgrade Code_Saturne to 1.3.2.

Code_Saturne 1.3.2 contains important corrections in the extended
neighbourhood (used for gradient calculation with options IMRGRA=2 and 3
and for the LES dynamic model), in the steady-state algorithm and for
rotation periodicity. Therefore it is strongly advised to upgrade to
version 1.3.2.  Earlier releases of version 1.3 (especially versions 1.3.f
and 1.3.1) are considered obsolete and have been removed from the website.

Note: the pdf handbooks don't build at the moment, but they are
available from the Code_Saturne's main site.

16:45 thierry 

Upgrade ECS to 1.3.1.

21:04 thierry 

Code_Saturne is EDF's general purpose computational fluid dynamics
software. Developed since 1997 at EDF R&D, it is based on a co-located
Finite Volume approach that accepts meshes with any type of
cell (tetrahedral, hexahedral, prismatic, pyramidal, polyhedral, ...)
and any type of grid structure (unstructured, blockstructured, hybrid,
conforming or with hanging nodes, ...).
Its basic capabilities enable the handling of either incompressible or
expandable flows with or without heat transfer and turbulence (mixing
length, 2-equation models, v2f, Reynolds stress models, Large Eddy
Simulations, ...).

<http://rd.edf.com/code_saturne/>