Mark some ports failing on power64.  In cases where the error message
was a stub, provide a real one.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)
Reported by:	swills

Split off the harfbuzz icu support into it's own port.

PR:		207779
Submitted by:	Vladimir Kondratyev <vladimir@kondratyev.su>
Exp-run by:	antoine@

- Fix shebangs

Chase update of graphics/poppler (and slaves ports) in revision r430777

devel/icu: update to 58.1

Changes:	http://site.icu-project.org/download/58
PR:		214384
Exp-run by:	antoine
Approved by:	office (bapt)

- Update devel/icu to 57.1.
- Clean up the Makefile.
- Follow some upstream recommendations (--with-data-packaging=archive,
  --disable-renaming, -DICU_NO_USER_DATA_OVERRIDE).
- Patch makefiles to install static libraries with INSTALL_DATA so they
  aren't stripped.
- Patch config/mh-bsd-gcc to sync with config/mh-linux-gcc.
- Fix endianness detection in ICU.  The code wanted to use BYTE_ORDER
  defined in machine/endian.h, but this isn't visible because ICU is
  compiled with _XOPEN_SOURCE.  Patch the code to use _BYTE_ORDER instead.
- Compile ICU with C++11 compiler to enable move constructors.
- Patch ICU to fix a problem with atomics in the case of a C++11 compiler
  without C++11 header <atomic> (like Clang on FreeBSD 9).
- Bump all ports that depend on it due to library version change.
- Add USES=compiler:c++0x to some ports that pick up -std=c++0x from ICU
  pkgconfig files.
- Add USES=compiler:c++11-lib to graphics/libcdr01 because it also needs
  a C++11 runtime library now.  Add this to all ports that depend on it
  so their executables load the right libstdc++.so on FreeBSD 9.

PR:		205120
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Chase update of Poppler after revision r421386

- update libgd to 2.2.2
- new MASTER_SITES
- add security patch
PR:		210913
Submitted by:	Piotr Kubaj
MFH:		2016Q3
Security: CVE-2015-8874
Security: CVE-2016-3074
Security: http://www.openwall.com/lists/oss-security/2016/07/12/4

Bump PORTREVISION for the icu revert.

This time not bumping lang/php70, but devel/php70-intl which is the one
really depending on icu.

PR:		205120
With hat:	portmgr
Sponsored by:	Absolight

devel/icu: bump PORTREVISION on dependent ports

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Update poppler to 0.40.0. [1]

Add patches to py-poppler [2] and rubygem-poppler [3] to fix the build
of these ports with poppler 0.39+.

PR:		206293 [1]
Submitted by:	olivierd@ [1]
Obtained from:	ubuntu [2], rubygem-poppler upstream [3]

Add preliminary support of tlmgr.

 - TLPDB and tlmgr.log are located in /var/db/tlpkg.

 - "tlmgr conf texmf" modifies /var/db/tlpkg/texmf.cnf.
   libkpathsea looks up it first if it exists and ignore the standard ones
   in PREFIX/share/texmf-dist/web2c/texmf.cnf or
   PREFIX/share/texmf-local/web2c/texmf.cnf.

 - "tlmgr update" can still break consistency of the installed texmf-*
   hierarchy by FreeBSD Ports Collection if it runs by root.

- Split xpdfopen package from texlive-base.  This is because it is the only
  package depending on X11 library in it.

- Remove unnecessary libttf.so dependency [*].

PR:	202910 [*]

Fix dependency accidentally removed in the previous commits.

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be

Update poppler to 0.34.0. [1]

Chase all users of shlib version change of libpoppler.so.

PR:		201477 [1]
Submitted by:	olivierd@ [1]

- Fix dependency due to change in r392909.
- Remove unnecessary gmake dependency.

PR:	201890

Fix a missing dependency.

PR:	201857

- Use CTAN mirrors in MASTER_SITES.
- Simplify exclude list.

Fix dependency.

PR:	201706

Update TeXLive to TL2015.

- print/texlive-infra was renamed with print/texlive-tlmgr.
  Note that currently tlmgr(1) does not work because of
  lack of TLPDB.  This will be fixed.

- Lua libraries used in LuaTeX are separated into
  devel/tex-libtexlua and devel/texlibtexluajit.
  USE_TEX supports them via keywords "texlua" and "texluajit".

- libsynctex is currently installed by devel/tex-web2c.
  This will be separated into a single port.

- Add graphics/libpotrace and use installed libpotrace
  and libharfbuzz.

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

Update icu to 55.1

Update poppler to 0.30.0 [1].

Make sure we use openjpeg1 in poppler, while openjpeg2 support
was added there still bugs in openjpeg2 that need to be fixed.
Add patches to inkscape for API changes in poppler 0.29.0 [2].

PR:		196599 [1]
Submitted by:	olivierd@ [1]
Exp-run by:	antoine@
Obtained from:	upstream [2]

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

- Move kpse* scripts from texlive-base to tex-kpathsea.
- Use install-strip target.

Bump PORTREVISION after graphics/poppler update to 0.26.3

Cleanup plist

print/freetype:
- Remove old libtool patch
- Remove :oldver from USES=libtool and bump dependent ports

- Add capability to specify package dependency in USE_TEX.
- Make print/texlive-full always depend on the latest packages; currently
  texmf>=20140525_2 and base>=20140525_1.

Update TeXLive to 2014.

- Note that full support of configuration tools such as tlmgr and texconfig
  is not ready yet.

- Most of dviware now supports libpaper to choose the default papersize.
  Use paperconfig(8) utility or print/papersize-default-* packages.

- Some quite old macros of the age of latex209 have been removed, and
  there are user-visible/invisible incompatibilities.  Please send a report
  to freebsd-tex@FreeBSD.org or file a PR if you have trouble.

- Drop .la files for print/tex-ptexenc
- Bump dependent ports as .so version has changed
- Also fix upgrade of dependent ports, as portrevision was not bumped after
previous change

Approved by:	portmgr blanket

Support stage for texlive, given it is impossible to rebuild the fmt files into
the stage then they are now rebuild in post-installation, like it is done in
other package system

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Adjust plist after t1utils were unbundled

With hat:	portmgr

Support stage
Unbundle poppler

Chase boost and icu bump
While here convert some LIB_DEPENDS

Fix properties on pkg-plist

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

Fix build with libc++

Add an explicit dependency on pkgconfig

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- update libdg to 2.1.0

Remove bin/biber.  This is a prebuilt binary in the distfile for a specific
platform.

Pointed out by:	Nikola Lecic

Fix pkg-plist.

Reported by:	miwi

- Fix duplicated pkg-plist entries.
- Split off documentation to print/texlive-docs from print/texlive-texmf.
  The document part was 1.3GB (30k files).  Now the size of texlive-texmf
  package is 557MB (this was 1.5GB before the split).
- do-texhash, do-fmtutil, do-updmap targets now run after post-install.

Add USE_TEX=texhash-bootstrap to fix initial ls-R file catalog generation.

Fix fmtutil.cnf issue (missing %D).

Mark USE_TEX=texlive in TeXLive-specific ports.

Rectify USE_TEX to support both of teTeX and TeXLive.

TEX_DEFAULT:
	A knob to choose teTeX or TeXLive.  One can specify in /etc/make.conf.

USE_TEX:
	A knob for port developers.  Valid keywords are listed in
	bsd.tex.mk.

Split off print/tex-dvipsk from print/texlive-base.  libpaper support
will be added later.

- Separate print/tex-dvipdfmx from print/texlive-base and add libpaper
  support.  dvipdfmx's default paper size can be set by
  ${LOCALBASE}/etc/papersize and/or PAPERSIZE environment variable as
  other programs like print/psutils do.

- Use absolute pathname in {fmtutil,texconfig,updmap}-sys programs because
  manually-installed and/or old TeXLive files can prevent them from
  working. [1]

- Fix pkg-plist in print/texlive-texmf.

- Remove DIST_SUBDIR from Mk/bsd.tex.mk.

Reported by:	bsam, Stephen Montgomery-Smith [1]

TeXLive mega commit.  The following ports have been added:

  * Meta port
   - print/texlive-full: meta port to install all of the TeXLive components

  * Libraries
   - devel/tex-kpathsea: kpathsea library
   - devel/tex-web2c: WEB2C toolchain and TeX engines
   - print/tex-ptexenc: character code conversion library for pTeX

  * Base part of the TeXLive
   - print/texlive-base: binary programs in TeXLive
   - print/texlive-texmf: macro and font data in TeXLive
   - print/texlive-infra: tlmgr dependency (Perl modules)