| Port details |
- py-pollyreports Band-oriented PDF report generation from database query
- 1.8 print
 =0      1.8Version of this port present on the latest quarterly branch. - Maintainer: jjachuf@gmail.com
- Port Added: 2012-10-17 08:56:08
- Last Update: 2023-01-11 15:58:34
- Commit Hash: 77d6847
- Also Listed In: python
- License: BSD2CLAUSE
- Description:
- PollyReports.py provides a set of classes for database report writing.
It assumes that you are using Reportlab to do PDF generation, but can
work with any "canvas-like" object as desired.
  ¦  ¦  ¦  ¦  - pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}PollyReports>0:print/py-pollyreports@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/print/py-pollyreports/ && make install clean
- To add the package, run one of these commands:
- pkg install print/py-pollyreports
- pkg install py39-PollyReports
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-PollyReports listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-PollyReports
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1606596360
SHA256 (PollyReports-1.8.tar.gz) = a5d90ce9adce901c794d40b7aa011ed59ebb82b3e6c2831e3cddaa9ac86f5bfa
SIZE (PollyReports-1.8.tar.gz) = 21909
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:- ===> The following configuration options are available for py39-PollyReports-1.8:
REPORTLAB=off: Install Reportlab
===> Use 'make config' to modify these settings
- Options name:
- print_py-pollyreports
- USES:
- python:3.6+
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
1.8
11 Jan 2023 15:58:34
 |
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
1.8
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
1.8
20 Jul 2022 14:22:48
|
Tobias C. Berner (tcberner) |
print: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alexander Vereeken <Alexander88207@protonmail.com>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alonso Cardenas Marquez <acm@FreeBSD.org>
* Andreas Klemm <andreas@FreeBSD.org>
* Andreas Klemm <andreas@klemm.gtn.com>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Anish Mistry <amistry@am-productions.biz> (Only the first 15 lines of the commit message are shown above ) |
1.8
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
1.8
28 Dec 2020 23:02:15
 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
1.8
28 Nov 2020 20:49:33
|
yuri |
print/py-pollyreports: Update 1.7.7 -> 1.8
PR: 248183
Approved by: jjachuf@gmail.com (maintainer's timeout 130 days) |
1.7.7
20 Jun 2018 17:05:44
|
mat |
Use PY_FLAVOR for dependencies.
FLAVOR is the current port's flavor, it should not be used outside of
this scope.
Sponsored by: Absolight |
1.7.7
30 Nov 2017 15:50:34
 |
mat |
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above ) |
1.7.7
01 Apr 2016 14:16:20
|
mat |
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight |
1.7.7
12 Feb 2016 20:45:01
|
rm |
print/py-pollyreports: update to 1.7.7
- update to 1.7.7
while here:
- add NO_ARCH and sort USE_PYTHON
- drop python version limit, because it builds fine both with 2.x and 3.x
PR: 206871
Submitted by: jjachuf@gmail.com (maintainer) |
1.7.6
17 Aug 2015 14:20:41
|
mat |
Remove UNIQUENAME and LATEST_LINK.
UNIQUENAME was never unique, it was only used by USE_LDCONFIG and now,
we won't have conflicts there.
Use PKGBASE instead of LATEST_LINK in PKGLATESTFILE, the *only* consumer
is pkg-devel, and it works just fine without LATEST_LINK as pkg-devel
has the correct PKGNAME anyway.
Now that UNIQUENAME is gone, OPTIONSFILE is too. (it's been called
OPTIONS_FILE now.)
Reviewed by: antoine, bapt
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D3336 |
1.7.6
24 Oct 2014 16:43:00
|
mva |
- Convert ports of news/ and print/ to new USES=python
Approved by: portmgr (implicit) |
1.7.6
26 Jun 2014 14:09:06
|
wg |
print/py-pollyreports: support stage
- Use options helper
- Adjust LICENSE
- Use auto plist
Approved by: portmgr (stage blanket) |
1.7.6
13 Jan 2014 21:00:04
|
rene |
Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by: python (mva, rm)
Approved by: portmgr-lurkers (mat) |
1.7.6
04 Dec 2013 15:31:07
|
culot |
- Update to 1.7.6
PR: ports/184494
Submitted by: Jose Jachuf <jjachuf@gmail.com> (maintainer) |
1.7.2
20 Sep 2013 22:44:00
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
print) |
1.7.2
17 Jan 2013 15:18:10
|
culot |
- Update to 1.7.2
PR: ports/175352
Submitted by: Jose Jachuf <jjachuf@gmail.com> (maintainer) |
1.6.7
23 Oct 2012 18:50:35
|
culot |
- Update to 1.6.7
PR: ports/172986
Submitted by: Jose Jachuf <jjachuf@gmail.com> (maintainer)
Feature safe: yes |
1.6.6
17 Oct 2012 08:55:50
|
rm |
PollyReports.py provides a set of classes for database report writing.
It assumes that you are using Reportlab to do PDF generation, but can
work with any "canvas-like" object as desired.
WWW: http://newcenturycomputers.net/projects/pollyreports.html
PR: 172537
Submitted by: Jose Jachuf <jjachuf at gmail dot com>
Feature safe: yes |
As an Amazon Associate I earn from qualifying purchases.