print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>

print/lilypond:  update to 2.22.2

ChangeLog:
http://lilypond.org/news.html#LilyPond-2_002e22_002e2-released_0021-February-22_002c-2022

PR:	264466
Reported by:	m.ne@gmx.net (maintainer)

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port

framework: Add new USES 'magick' for graphics/ImageMagick*

A new USES has been added to depend on ImageMagick.

	USES=magick

adds a LIB_DEPENDS on graphics/ImageMagick${IMAGEMAGICK_DEFAULT}.

If a specific version is required, use for example

	USES=magick:6        resp.     USES=magick:7

If only a build, run or test is required, use for example

	USES=magick:build    resp.     USES=magick:6,build,test

print/lilypond: Add CPE information

Approved by:    portmgr (blanket)

print/{lilypond,lilypond-devel}: fix DEPENDS

print/lilypond: Update to 2.22.1

https://lilypond.org/news.html#LilyPond-2_002e22_002e1-released-April-25_002c-2021

PR:		255482
Submitted by:	m.ne@gmx.net (maintainer)

Remove # $FreeBSD$ from Makefiles.

print/lilypond: Add build option to use Guile2

PR:	254572
Submitted by:	m.ne@gmx.net (maintainer)

print/lilypond:  update to 2.22.0

ChangeLog: https://lilypond.org/doc/v2.22/Documentation/changes

PR:	253030
Submitted by:	m.ne@gmx.net (maintainer)

print/lilypond:  update to 2.21.82

Remove deprecated dependency on Python 2.7

ChangeLog:
http://lilypond.org/news.html#LilyPond-2_002e21_005e82-released-December-15_002c-2020

PR:	252215
Submitted by:	m.ne@gmx.net (maintainer)

print/lilypond: update 2.18.2 -> 2.20.0

- submitter becomes maintainer
- WWW points to new site
- updated manuals

PR:		245754
Submitted by:	Martin Neubauer <m.ne@gmx.net>

print/lilypond: Fix configure

Fix configure script issues detecting fontforge after fontforge update.

Based on the idea in PR 240407

Mark BROKEN

ERROR: Please install required programs:  /usr/local/bin/fontforge >= 20110222
(installed: 127.0.0.1)

Reported by:	pkg-fallout

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

print/lilypond*: Drop nop GNU_MAKEFILE

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Update ImageMagick to 6.9.10.14 [1]

* Add PKGNAMESUFFIX and rename the directory. This was done to show
  that IM6 is not the "main" version. But still fully supported by upstream.
* Convert a number of options to optionhelpers.
* Add option for ISO/IEC 23008-12:2017 HEIF suport
* Add comment to pkg-descr explaining IM6's "legacy" tag.
* Add comment to the patch-config_policy.xml file why it still needed.

Please note that IM7 is not a drop in replacement due to library API and
command arguments changes. And as a result ports need to decide for themself
which version to use.

Chase these changes in all the ports that using IM6.

PR:		225102 (based on, only the version update) [1]
Submitted by:	Pascal Christen <pascal.christen@hostpoint.ch>

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Fix build with GCC-based architectures.

PR:		232098
Submitted by:	Piotr Kubaj

- Fix LICENSE
- Add LICENSE_FILE
- Pet portlint
- Switch to options helpers
- Switch to new test framework

Approved by:	portmgr blanket

print/lilypond: Unbreak

Port changes:
* Add patch removing fc-cache that caused the fs violation problem
* Fix COMMENT
* Add LIB_DEPENDS

Fix USES=python syntax

In several dozen ports, use single space for WWW: line in pkg-descr, and
reformat port description text in cases when it was notoriously broken.

Replace dirty creative mechanism to check pkg-config version with a proper one
that is native and does not fail to figure out 1 > 0.9

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

- Strip binaries

Make fonts repecting XDG

Xorg is now looking in ${LOCALBASE}/share/fonts by default
Xorg now accepts symlinks in etc/X11/fontpath.d (as decribed in Xserver(1))
Large cleanup on lots of font ports
All fonts are now properly dynamically generating fonts.dir and fonts.scale
instead of sometime overwriting existing ones)
All fonts are generating fontconfig's cache
Improve consistency in fonts ports

- Reset maintainership of my ports

Cleanup plist

- Convert ports of news/ and print/ to new USES=python

Approved by: portmgr (implicit)

lang/guile:
- Add USES=libtool and bump dependent ports
- Replace Makefile.* patches with USES=pathfix
- Replace config.h.in patch with USE_AUTOTOOLS=autoheader
- Avoid automake by touching Makefile.in

Approved by:	portmgr (implicit, bump unstaged port)

Fix typo

Fix build on head

Correct all instances where OPTIONS_DEFINE was being overwritten
by multiple definitions.

Convert GMAKE to MAKE_CMD
Please note that lots of invocation of MAKE_CMD here are wrong as they do not
properly respect MAKE_ENV and friends

With hat:	portmgr

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

- Update to 2.18.2

Remove trailing whitespaces from category print

- Update to 2.18.1

  We have released updated manuals for LilyPond's stable version, 2.18. The
  manuals are now for 2.18.1 and have a number of updates and improvements over
  2.18.0. There will be a further release of 2.18 in the future (2.18.2), and
  this will include the updates to the manuals as well as some minor
  enhancements to the LilyPond core functionality.

  To summarise the current situation: stable LilyPond application: 2.18.0;
  stable LilyPond manuals: 2.18.1; development for both: 2.19.2.

- Provide a NLS option

According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.

This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.

Approved by:    portmgr (bapt)

- Update to 2.18.0

  Changes: http://lilypond.org/doc/v2.18/Documentation/changes/

Update freetype to 2.5.2.

Remove patch to add -I/usr/local/include in freetype-config --cflags. If
ports need extra headers they should look for them, and not get them via
a side-effect.

Freetype had a header resuffle in 2.5.1, patch ports to use the new header
style.

Thanks go to bdrewery for the two exp-runs and rakuco for helping me with
some troublesome cmake ports.

PR:		ports/184587

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

Add an explicit dependency on pkgconf

Rectify USE_TEX to support both of teTeX and TeXLive.

TEX_DEFAULT:
	A knob to choose teTeX or TeXLive.  One can specify in /etc/make.conf.

USE_TEX:
	A knob for port developers.  Valid keywords are listed in
	bsd.tex.mk.

Remove *_DEPENDS from ports which depend on teTeX and add USE_TEX=tetex
instead to make migration to TeXLive easier.

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

- Fix texinfo arguments that cause problem during the build
- Bison is build-dependency only

- Convert to OPTIONSng

Convert USE_BISON to USES= bison

It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build

it brings bison as a run dependency in case it is set the following way:
USES= bison:run

it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both

While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix

- Update to 2.16.1
  http://lists.gnu.org/archive/html/info-lilypond/2012-11/msg00002.html
- Trim Makefile header

Feature safe:	yes

- Update to 2.16.0

  Release notes: http://lilypond.org/doc/v2.16/Documentation/changes/index.html

- fix non-privileged install

PR:		169870
Submitted by:	Jan Beich <jbeich@tormail.org>

- update png to 1.5.10

- Mark MAKE_JOBS_UNSAFE since this failed with MAKE_JOBS for me

PR:             ports/165307
Submitted by:   swills (myself)
Approved by:    maintainer (gahr)

- Fix PLIST when building WITHOUT_NLS
- Bump PORTREVISION

Reported by:   Jim Long <james@umpquanet.com>

- Update to 2.14.2

  We are happy to announce the release of LilyPond 2.14.2. This fixes a few
  minor bugs in the stable version, and should cause no problems. We recommend
  that everybody upgrade to this version.

- Chase guile shared lib bump
- Add an entry to UPDATING

- Update to 2.14.1
  This is a new stable release. From now on, I won't be tracking the development
  release any more.
  Release notes: http://lilypond.org/doc/v2.14/Documentation/changes/index.html

- Update to 2.13.63
  This is the seventh release candidate of the upcoming 2.14 stable release.
  All users are invited to experiment with this version. New features since
  2.12.3 are listed in the Changes manual on the website section about
  Development: http://lilypond.org/development.html.

- Update to 2.13.62
- Correct typo in NO_CCACHE variable name

Bump PORTREVISION after open-mofit update

- Update to 2.13.61

- Explicitely use base flex and yacc: the port breaks when bison
  from ports is used in emutaled yacc mode.

PR:             156488
Submitted by:   Christoph Moench-Tegeder <cmt@burggraben.net>

- Update to 2.13.60

- Update to 2.13.58
  This is the sixthrelease candidate of the upcoming 2.14 stable release.
  All users are invited to experiment with this version. New features since
  2.12.3 are listed in the "Changes" manual on the website section about
  Development.

- Update to 2.13.57
  This is the fourth release candidate of the upcoming 2.14 stable release.
  All users are invited to experiment with this version. New features since
  2.12.3 are listed in the "Changes" manual on the website section about
  Development.

- Update to 2.13.56
  this is the fourth release candidate of the upcoming 2.14 stable release.
  All users are invited to experiment with this version. New features since
  2.12.3 are listed in the "Changes" manual on the website section about
  Development.
- Restore USE_AUTOTOOLS

- Update to 2.13.55
- Partly refactor the port

- Update to 2.13.54
  This is this is the third release candidate of the upcoming 2.14 stable
  release. All users are invited to experiment with this version.
  New features since 2.12.3 are listed in the Changes manual on the website
  section about Development (http://lilypond.org/development.html).

- Update to 2.13.53

- Update to 2.13.51

- Update to 2.13.50

- Update to 2.13.49

- Update to 2.13.48

Feature safe:   yes

- Update to 2.13.47

Feature safe:   yes

- Update to 2.13.43

- Update to 2.13.41

Sync to new bsd.autotools.mk

- Update to 2.13.38
  This is the fourth alpha test of the upcoming 2.14 stable release

Punt autoconf267->autoconf268

- Update to 2.13.35
  This is the second alpha test of the upcoming 2.14 stable release.

- Update to 2.13.34

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

- Update to 2.13.30
- Unbreak
- Disable installation of web docs (does not work)

- Mark BROKEN: does not build (info files issues)

Reported by:    pointyhat

- Fix INFO installation

Reported by:    QAT
Feature safe:   yes

- Update to 2.13.26

Feature safe:   yes

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

Switch to use newer GMP version.

PR:             ports/144487
Submitted by:   ale
Approved by:    portmgr (-exp run by erwin)

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- Add build dependency on net/rsync when installing docs

PR:             144149
Submitted by:   Henry Miller <hank@millerfarm.com>
Feature safe:   yes

- update to jpeg-8

- Update to 2.13.9

- Update to 2.13.6