non port: print/gspdf/Makefile |
Number of commits found: 33 |
Friday, 3 Nov 2023
|
07:17 Michael Osipov (michaelo)
*/*: Bump PORTREVISION for Ghostscript 10 change
Reported by: sunpoet
Approved by: jrm (mentor), sunpoet
Differential Revision: https://reviews.freebsd.org/D42412
fcf68ae5e |
Tuesday, 25 Apr 2023
|
15:17 Christian Weisgerber (naddy)
audio/opus: bump consumers after update to 1.4
feb1fa3 |
Wednesday, 7 Sep 2022
|
21:10 Stefan Eßer (se)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.
There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.
The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.
Approved by: portmgr (tcberner)
b7f0544 |
Wednesday, 7 Apr 2021
|
08:09 Mathieu Arnold (mat)
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
cf118cc |
Tuesday, 6 Apr 2021
|
14:31 Mathieu Arnold (mat)
Remove # $FreeBSD$ from Makefiles.
305f148 |
Sunday, 14 Feb 2021
|
23:21 nc
Update a few GNUstep ports:
* devel/gnustep-make: Update to 2.8.0
* lang/gnustep-base: Update to 1.27.0
* x11-toolkits/gnustep-back: update to 0.28.0
* x11-toolkits/gnustep-gui: update to 0.28.0
Also bump PORTREVISION on dependent ports.
|
Sunday, 3 Feb 2019
|
15:37 theraven
Move Objective-C ports to the v2 GNUstep ABI.
* Bump the LLVM revision used for GNUstep to 7, the minimum to support
the new ABI.
* GNUstep-back does not work with lld, so mark it to use Gold (BFD LD
doesn't seem able to link Objective-C things).
* Turn off some annoying debug logs in GNUstep back, which generate
several messages per second when you move the mouse. These should
never have been enabled in a release build anyway.
* Downgrade Cenon to 4.0.2. This was the last version to actually work
with GNUstep (the later ones use XCode >= 5 .xib files, which GNUstep
can't parse).
* Update gorm to git head. The current release doesn't work with the
new Objective-C ABI, but -head has the patches to fix it.
* Update PikoPixel and add it to the gnustep-app meta-package.
* Update the three core GNUstep packages to the latest release.
* Update gnumail and pantomime to the latest release and fix a linking
error with the new ABI.
* Update GNUstep FTP to the latest version.
Reviewed by: bapt (previous version)
|
Wednesday, 26 Sep 2018
|
15:23 brooks
Update Objective-C LLVM version to 6.0.
Fixes aarch64 build. Reduces depends on obsolete LLVM 4.0.
PR: 230116
Submitted by: mikael.urankar@gmail.com
Approved by: theraven (prior version)
Sponsored by: DARPA, AFRL
|
Thursday, 11 Jan 2018
|
16:24 danfe
Remove superfluous linefeeds.
|
Sunday, 3 Dec 2017
|
12:23 theraven
Fix configure options for gnustep-make
We were not setting the flag to select the GNUstep ABI, so were defaulting to
using the GCC-compatible version, which was likely to trigger a lot of subtle
bugs. This was noticed when C++ exceptions thrown through Objective-C stack
frames caused segfaults.
|
Monday, 21 Aug 2017
|
13:26 theraven
Update GNUstep core libraries.
Update the default Objective-C compiler.
Fix various build failures in GNUstep ports from newer versions of the GNUstep
core libraries and from changes to GNUstep Make.
Update various ports that use GNUstep and bump the portrevision of the ones
that haven't had a new release.
|
Thursday, 24 Mar 2016
|
15:47 tijl
Make print/ghostscript9-agpl-base the default Ghostscript port. Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.
Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.
Fix print/ghostscript9-agpl-base to install eps2write.
Update math/asymptote to 2.37 to support newer Ghostscript.
PR: 208159
Exp-run by: antoine
Approved by: portmgr (antoine)
|
Saturday, 19 Sep 2015
|
10:33 theraven
Make all GNUstep ports install into the System domain so that the Local domain
is available for stuff built from source.
Some ports were already installing in the System domain, for these just remove
the Makefile lines explicitly specifying the install domain.
The rest are installed in the Local domain, remove any overrides, update their
pkg-plists and any explicit paths in the Makefiles and then bump port revision.
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D2977
|
Saturday, 22 Aug 2015
|
17:48 hrs
- Split ghostscript into X11-independent and -dependent parts:
* print/ghostscript{7,8,9,9-agpl}-base
Installs Ghostscript binary, libgs, and related files.
These ports do not depend on X11 libraries (i.e. x11* devices
are not available). USES=ghostscript will set dependency on
one of them depending on GHOSTSCRIPT_DEFAULT.
The default device is set to "display" or "bbox".
* print/ghostscript{7,8,9,9-agpl}-x11
Installs a shared library which provides X11 support to
the installed Ghostscript binaries. x11* devices will be
enabled when the library is available.
This depends on *-base (RUN_DEPENDS). USES=ghostscript:x11
will set dependency on one of them.
- Fix integer overflow reported as CVE-2015-3228.
- Update Uses/ghostscript.mk:
* Add x11 keyword. nox11 keyword is now obsolete.
* Use packagename in *_DEPENDS line to prevent relationship between
-base and -x11 packages from being broken.
- Fix x11/nox11 keyword and bump PORTREVISION in ports using
USES=ghostscript to update dependency of pre-compiled packages.
|
Thursday, 16 Jul 2015
|
20:53 kwm
Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.
Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl
PR: 201201 (exp-run)
Approved by: portmgr (mat@)
Exp run by: antione@ (previous patch)
Differential Revision: https://reviews.freebsd.org/D2938
|
Thursday, 18 Jun 2015
|
19:48 amdmi3
- Strip binary
|
Thursday, 9 Apr 2015
|
07:44 bapt
Convert bsd.gnustep.mk to USES=gnustep
Simplify gnustep ports
Hook into the regular ports framework:
- LIB_DEPENDS for library dependencies
- Use regular USE_LDCONFIG
Reuse USES=objc (automatic)
USE_GNUSTEP is now a macro to set the dependencies and build feature needed.
Accepted arguments: back base build gui
Merge deskutils/preferencepanes into deskutils/systempreferences
|
Wednesday, 10 Sep 2014
|
20:50 gerald
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
Tuesday, 5 Aug 2014
|
22:13 tijl
Bump PORTREVISION on more ports that depend on libgcrypt after the update
in r363436 and remove the UPDATING entry because it did not guarantee
that all ports were updated nor that they were updated in the right order.
Also remove libgcrypt.la again.
PR: 192342
Approved by: portmgr (implicit, bump unstaged ports)
|
Sunday, 6 Jul 2014
|
13:38 pawel
- Port is stage safe
- Remove leading article from COMMENT
|
Friday, 20 Sep 2013
|
22:44 bapt
Add NO_STAGE all over the place in preparation for the staging support (cat:
print)
|
Saturday, 13 Oct 2012
|
13:39 dinoex
- cleanup comments
Feature safe: yes
|
Tuesday, 26 Jun 2012
|
05:43 dinoex
- reset MAINTAINER
|
Friday, 8 Jun 2012
|
05:06 dinoex
- update to 0.5
|
Friday, 6 Aug 2010
|
16:26 dinoex
- update to 0.4
|
Sunday, 30 May 2010
|
12:28 dinoex
- drop USE_GNUSTEP_PREFIX
|
Monday, 6 Jul 2009
|
20:03 dinoex
- update to 0.3
|
Sunday, 15 Mar 2009
|
20:56 dinoex
- update to 0.2
|
Friday, 6 Jun 2008
|
13:58 edwin
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
Saturday, 19 May 2007
|
20:32 flz
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
Wednesday, 31 Jan 2007
|
18:18 dinoex
- add category gnustep
PR: 103931
Approved by: pav
|
Saturday, 13 Jan 2007
|
03:57 dinoex
- update to use new bsd.gnustep.mk
Approved by: gurkan@linuks.mine.nu
|
Tuesday, 31 Oct 2006
|
05:52 dinoex
GSPdf is a Postscript and Pdf Viewer for GNUstep.
It is a frontend for Ghostscript.
WWW: http://www.gnustep.it/enrico/gspdf/
|
Number of commits found: 33 |