*/*: Bump PORTREVISION for Ghostscript 10 change

Reported by:	sunpoet
Approved by:	jrm (mentor), sunpoet
Differential Revision:	https://reviews.freebsd.org/D42412

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>

print/foo2zjs: Add CPE information

Approved by:	portmgr (blanket)

print/foo2zjs: Clean up makefile

No functional changes intended.

Remove # $FreeBSD$ from Makefiles.

Convert to UCL & cleanup pkg-message (categories [p-r])

Add support for HBPLv1 printers with patch from
https://www.cybercom.net/~dcoffin/hbpl/

Also fix patch-getweb.in: remove -o from FETCHOPTS because fetch is
sometimes executed without output file.

PR:		211754
Submitted by:	Oliver Kett <freebsd@broken-wire.de>

print/foo2zjs: update to 20161203 (unbreak) and remove GOOGLE_CODE
from MASTER_SITES (has gone).

GOOGLE_CODE has gone away.

- If a port has another upstream, remove GOOGLE_CODE
- If a port only has GOOGLE_CODE mark it BROKEN

Some ports have a local mirror configured but for security reasons, it
is not considered upstream.

Sponsored by:	Absolight

Convert tab after WWW: in pkg-descrs to single space as per PHB

Approved by:	portmgr blanket

Depend on cups-filters instead of foomatic-filters to provide foomatic-rip.
Foomatic-filters is no longer developed.

PR:		208551
Submitted by:	pyo@mail.ru

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

- Add LICENSE
- Switch to options helpers

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be

print/foo2zjs: Upgrade to version 20150511.

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

Cleanup plist

print/foo2zjs: update to version 20140417

ports/foo2zjs: mark the port as MAKE_JOBS_UNSAFE

Error log:
-----
chmod -w osx-hplj-hotplug.1
chmod: osx-hplj-hotplug.1: No such file or directory
-----

Full log is here:
https://jenkins.freebsd.org/pci/100-amd64/logs/bulk/100amd64-default/569/logs/errors/foo2zjs-20140401_1.log

Reported by:	jenkins (swills)
MFH:		2014Q2

print/foo2zjs: add run time dependency upon textproc/gsed

. assumig the following code is intended, add a run time dependency
upon textproc/gsed:
----- foo2zjs-pstops.sh -----
case `uname -s` in
FreeBSD)        sed=gsed;;
-----

. bump PORTREVISION.

Reported by:	stb@ (at freebsd-ports@)
MFH:		2014Q2

print/foo2zjs: update to version 20140401.

Changes:
2014-04-01	Rick Richardson <rick.richardson@comcast.net>
	* foo2hbpl2 foomatic-db files and PPDs:
	  Bug with default PageSize.
	  PLEASE delete and recreate the foo2hbpl2 printers.

Add files/foo2zjs.conf.in forgotten at r349883.

Pointed out by:	swills (by e-mail)

print/foo2zjs -- incorporate devd configuration file:
. add a configuration file with samples for devd;
. add a note to pkg-message file;
. bump PORTREVISION.

PR:		ports/162313 (based on)
Submitted by:	rmh

print/foo2zjs: We mention an INSTALL file at the pkg-message,
but do not install it. Let's fix it!

Update to version 20140330.

print/foo2zjs: fix dependence on libcups

Release cups-* nad foomatic-* ports. Currently I have no enough
spare time for those ports.

I've submitted ports/186824 to update cups-* ports to version 1.7.0.

Fix old makeplist bug.

Pointy hat to:	people who blindly use makeplist
Sponsored by:	Absolight

Update to version 20131225.

. take maintainership;
. update to version 20131118;
. use new LIB_DEPENDS syntax;
. USE_GMAKE -> USES=gmake;
. USES=shebabgfiles for msexpand;
. allow staging;
. remove unneeded ${CAT} ${PKGMESSAGE}.

PR:		ports/184689
Submitted by:	bsam (me)
Approved by:	acm (former maintainer, maintainer timeout)

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

Rely on bsdtar to autodetermine the format of the distfiles when possible

For a while now bsdtar is able to autotermine compression and archive format.
Let's then use tar directly instead of piping to tar.

Now USE_BZIP2 and USE_XZ only set EXTRACT_SUFX to the right format

- update png to 1.5.10

Stop installing empty ppd files due to a forgotten " ; \" in the upstream
Makefile

PR:             ports/165813
Submitted by:   4721

(Fixes also:)
PR:             ports/160465
PR:             ports/165465
Approved by:    maintainer timeout (acm, 14 days since PR with fix)
Feature safe:   yes

- Update to 20110609

PR:             158040
Submitted by:   bsam

- DISTNAME= ${PORTNAME}-${PORTVERSION} is the default and not needed.

PR:             ports/153292
Submitted by:   myself (pgollucci)
Tested by:      -exp run by pav
Approved by:    portmgr (pav)

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update some ftp sites on getweb script
- Use passive FTP with fetch

PR:             135875
Submitted by:   Tom Mende <tmende at optusnet.com.au>

- Update to 20090530

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 20070120
- Add MASTER_SITE_LOCAL

Reported by:    kris

- Update to 20070108

- Update to 20061224
- Fix fetch problem and remove BROKEN state

Mark BROKEN: fails to fetch.

- Update to 20061212

PR:             ports/106659
Submitted by:   Armin Pirkovitsch <a.pirko__at__inode.at>

- Update to 20061010
- Fix wrapper files
- Add a note to pkg-message about a problem with foo2hp using 2bpp

PR:             ports/104344 ports/103616
Submitted by:   Frank J. Laszlo, Armin Pirkovitsch
Approved by:    portmgr (erwin)

- Update to 20061004

Reported by:    bsam

- Update to 20060919

- Update to 20060911
- See changelog at http://foo2zjs.rkkda.com/ChangeLog

Approved by:    garga (mentor, implicit)

- Update to 20060822

Approved by:    garga (mentor, implicit)

- Update to 20060804

Approved by:    garga (mentor)

Change maintainer address to my @FreeBSD.org email

Approved by:    garga (mentor)

- - Update to 20060625

PR:             ports/100254
Submitted by:   maintainer (Jose Alonso Cardenas Marquez)

Distfile rerolled, for the third time in 48 hours (small comments changed)

Reproted by:     Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
Approved by:    maintainer (on IRC)

- update to current release
- drop patch incorporated upstream at maintainer's advice

PR:             ports/99283
Submitted by:   itetcu (me)
Requested by:   Costi Ciudatu <ccciudatu @ gmail.com>
Tested by:      Costi Ciudatu <ccciudatu @ gmail.com>
Approved by:    maintainer

- Update to 20060607

PR:             ports/98727
Submitted by:   Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe> (maintainer)

- Update to 20060603
- Now, icm and firware files are downloaded using getweb script

PR:             ports/98511
Submitted by:   Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe> (maintainer)

foo2zjs is an open source printer driver for printers that use the Zenographics
ZjStream wire protocol for their print data, such as the Minolta/QMS magicolor
2300 DL or Konica Minolta magicolor 2430 DL. These printers are often
erroneously referred to as winprinters or GDI printers.

However, Microsoft GDI only mandates the API between an application and the
printer driver, not the protocol on the wire between the printer driver and the
printer. In fact, ZjStream printers are raster printers which happen to use a
very efficient wire protocol which was developed by Zenographics and licensed
by most major printer manufacturers for at least some of their product lines.

ZjStream is just one of many wire protocols that are in use today, such as
Postscript, PCL, Epson, etc.

WWW:    http://foo2zjs.rkkda.com/

PR:             ports/94592
Submitted by:   Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>