print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>

print/cups-pdf: Remove deprecated ghostscript setpdfwrite operator

cups-pdf prints a blank patch without this patch.

PR:		262757
Reported by:	freebsd-bugs@micallef.io
Obtained from:	archlinux (https://bugs.archlinux.org/task/70313)

Remove # $FreeBSD$ from Makefiles.

print/cups-pdf: fix patching paths

print/cups-pdf: Update to 3.0.1

Changelog:
https://www.cups-pdf.de/changelog.shtml

- Sort variables & improve style.
- Prefix some local variables with an underscore.
- Change the way PDF versions are handled (although the whole mechanism of
  changing a configuration file via custom port variables should probably
  be deprecated).

- Whitespace and cosmetic fixes
- Switch to options helpers
- Respect LDFLAGS
- Update WWW

When there is a do-install target, do not use a post-install target, do
everything at once.  Sometime, rename post-install into a options helper
target.

I did not fix ports that were such a mess that I could not figure out
what they really wanted to do.  I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.

With hat:	portmgr
Sponsored by:	Absolight

Remove NLS, DOCS, EXAMPLES and IPV6 from OPTIONS_DEFAULT, they are enabled by
default anyway and don't need to be listed

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

Cleanup plist

- Add stage support [1]
- Add option support [1]
- Trim COMMENT
- Strip binary
- Use @sample keyword in pkg-plist
- Do not try to remove etc/cups owned by dependency

PR:		ports/189682 [1]
Submitted by:	Matthieu Volat <mazhe@alkumuna.eu>

- Remove Author line
- Use single space after WWW:

Maintainer no longer wishes to maintain those ports

With hat:	portmgr

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

- update png to 1.5.10

Update to 2.6.1

PR:             ports/161306
Submitted by:   "Simon Olofsson" <simon@olofsson.de> (maintainer)
Feature safe:   yes

- Update to 2.5.1
- Add LICENSE

PR:             ports/156013
Submitted by:   Simon Olofsson <simon@olofsson.de>

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Remove an unneeded plist line to make QAT happy.

Pointy hat to:  delphij

Fix broken installation.

Submitted by:   maintainer
PR:             ports/141900

- Mark BROKEN: does not install

Reported by:    pointyhat

- Update to 2.5.0
- Update author info

PR:             ports/131064
Submitted by:   "Simon Olofsson" <simon@olofsson.de> (maintainer)

- Update to 2.4.8

PR:             125060
Submitted by:   Simon Olofsson <simon@olofsson.de> (maintainer)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 2.4.7
- Update www and email address

PR:             ports/122094
Submitted by:   Simon Olofsson <simon@olofsson.de>
Approved by:    tabthorpe (mentor)

- Update to 2.4.6

PR:             112427
Submitted by:   Simon Olofsson <simon@olofsson.de> (maintainer)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 2.4.5

PR:             109796
Submitted by:   Simon Olofsson <simon@olofsson.de> (maintainer)

- Update to 2.4.4

PR:             ports/108698
Submitted by:   Simon Olofsson <simon at olofsson.de> (maintainer)

- Update to 2.4.3

PR:             ports/105786
Submitted by:   Simon Olofsson <simon@olofsson.de> (maintainer)

- Update to 2.4.2

PR:             ports/103977
Submitted by:   Simon Olofsson <simon@olofsson.de> (maintainer)

Starting with version 1.2.0 CUPS implements the "RunAsOption" no longer.
In order to ensure CUPS-PDF is running with the required root privileges
make 'root' the owner of the cups-pdf backend and set the file permissions of
the backend to 0700 (root only).

PR:             ports/99498
Submitted by:   maintainer

- Update to 2.4.1
- small esthetic changes

PR:             ports/99063
Submitted by:   maintainer

- Update to 2.4.0
- Take over maintainership

PR:             ports/98751
Submitted by:   Simon Olofsson <simon@olofsson.de>
Approved by:    maintainer in ports/98408, in general

- patch cups-pdf.conf instead of header file.
- install cups-pdf.conf and cups-pdf.conf.sample
- bump PORTREVISION for plist change
- pass maintainership to submitter

PR:             ports/98408
Submitted by:   Simon Olofsson <simon@olofsson.de>
Approved by:    Mark Reidel <ports@mark.reidel.info> (old maintainer)
                lawrance (mentor, implicit)

- update to 2.3.1 [1]
- portlint

PR:             ports/97447
Submitted by:   Martin Wilke <freebsd@unixfreunde.de> [1]
Approved by:    maintainer (via private email), lawrance (mentor)

print/cups-pdf: update to 2.2.0, chase MASTER_SITES name change

        As reported by the "Unfetchable distfiles reminder" eMail, the distfile
        for print/cups-pdf is not fetchable. The last successful attempt points
        back to Wed Apr 5 10:35:47 2006 UTC.

        While i'm here,
        - update to the latest version
        - update MASTER_SITES and WWW line

PR:             ports/96908
Submitted by:   Joerg Pulz <Joerg.Pulz@frm2.tum.de>
Approved by:    maintainer timeout

Remove USE_REINPLACE from all categories starting with P

SHA256ify

Approved by: krion@

- Update to 1.7.4
- Update master site

PR:             87159
Submitted by:   Mark Daniel Reidel <ports@mark.reidel.info> (maintainer)
Approved by:    novel (mentor)

- Update to 1.7.0
- Supports accounts without valid shells again
- Updated PostScript PPD file supporting more DIN formats

PR:             ports/78485
Submitted by:   maintainer

- Update to 1.6.5

PR:             ports/76833
Submitted by:   Mark Daniel Reidel <ports@mark.reidel.info> (maintainer)

Add cups-pdf, a virtual printer for CUPS to produce PDF files.

PR:             ports/67961
Submitted by:   Mark Daniel Reidel <ports@mark.reidel.info>