| non port: net/py-urllib3/Makefile |
|
SVNWeb
|
Number of commits found: 76 |
|
Sat, 27 May 2023
|
[ 23:44 Po-Chuan Hsieh (sunpoet)  ]    7fd754e
net/py-urllib3: Update to 1.26.16
Changes: https://github.com/urllib3/urllib3/releases
|
|
Thu, 18 May 2023
|
[ 06:32 Yuri Victorovich (yuri) ] 6b79b75
net/py-urllib3: Remove devel/py-pytest-freezegun dependency because it it
unmaintained and broken
|
|
Wed, 5 Apr 2023
|
[ 17:31 Po-Chuan Hsieh (sunpoet) ] d12f16f
net/py-urllib3: Update to 1.26.15
- Update WWW
Changes: https://github.com/urllib3/urllib3/releases
|
|
Mon, 30 Jan 2023
|
[ 13:02 Po-Chuan Hsieh (sunpoet) ] f0a70d0
net/py-urllib3: Update to 1.26.14
- Update version requirement of RUN_DEPENDS and TEST_DEPENDS
Changes: https://github.com/urllib3/urllib3/releases
|
|
Wed, 11 Jan 2023
|
[ 15:58 Dmitry Marakasov (amdmi3) ] 77d6847 (Only the first 10 of 3335 ports in this commit are shown above.  )
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt
|
|
Thu, 29 Dec 2022
|
[ 08:43 Li-Wen Hsu (lwhsu) ] d4fb83c
net/py-urllib3: Update to 1.26.13
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 31 Aug 2022
|
[ 11:41 Po-Chuan Hsieh (sunpoet) ] ca608e8
net/py-urllib3: Update to 1.26.12
Changes: https://github.com/urllib3/urllib3/releases
|
|
Sat, 30 Jul 2022
|
[ 19:26 Po-Chuan Hsieh (sunpoet) ] da2ec2c
net/py-urllib3: Update to 1.26.11
Changes: https://github.com/urllib3/urllib3/releases
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 6a378e5 (Only the first 10 of 1159 ports in this commit are shown above. )
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com> (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 11 Jul 2022
|
[ 21:47 Po-Chuan Hsieh (sunpoet) ] fa2286c
net/py-urllib3: Add GitHub to MASTER_SITES
|
[ 13:51 Po-Chuan Hsieh (sunpoet) ] e5d2073
net/py-urllib3: Update to 1.26.10
Changes: https://github.com/urllib3/urllib3/releases
|
|
Tue, 21 Jun 2022
|
[ 16:36 Po-Chuan Hsieh (sunpoet) ] 26f5c71
net/py-urllib3: Convert to USE_PYTHON=pytest
- Sort TEST_DEPENDS
|
|
Sat, 16 Apr 2022
|
[ 04:19 Po-Chuan Hsieh (sunpoet) ] 2917746
net/py-urllib3: Update to 1.26.9
Changes: https://github.com/urllib3/urllib3/releases
|
|
Sat, 29 Jan 2022
|
[ 01:19 Po-Chuan Hsieh (sunpoet) ] be327da
net/py-urllib3: Update to 1.26.8
Changes: https://github.com/urllib3/urllib3/releases
|
|
Wed, 29 Sep 2021
|
[ 19:56 Bernhard Froehlich (decke) ] a9ef684
net/py-urllib3: Add CPE information
Approved by: portmgr (blanket)
|
|
Mon, 27 Sep 2021
|
[ 15:56 Po-Chuan Hsieh (sunpoet) ] 8ac4732
net/py-urllib3: Update to 1.26.7
Changes: https://github.com/urllib3/urllib3/releases
|
|
Sat, 24 Jul 2021
|
[ 20:23 Po-Chuan Hsieh (sunpoet) ] 83ab2b2
net/py-urllib3: Update to 1.26.6
Changes: https://github.com/urllib3/urllib3/releases
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sun, 10 Jan 2021
|
[ 16:04 rene ]   (Only the first 10 of 14 ports in this commit are shown above. )
Remove empty PY_IPADDRESS from ports using Python 3.6+
Also remove one manual declaration (net-mgmt/py-aggregate6)
|
|
Sat, 9 Jan 2021
|
[ 16:34 antoine ] (Only the first 10 of 28 ports in this commit are shown above. )
Remove python 2.7 support from a few ports
|
|
Mon, 26 Oct 2020
|
[ 23:18 dbaio ]
net/py-urllib3: Update to 1.25.11
Changelog: https://github.com/urllib3/urllib3/blob/1.25.11/CHANGES.rst
Approved by: python (with hat)
MFH: 2020Q4 (blanket: bugfix release)
|
|
Mon, 17 Aug 2020
|
[ 23:42 dbaio ]
net/py-urllib3: Update to 1.25.10
Changelog: https://github.com/urllib3/urllib3/blob/1.25.10/CHANGES.rst
PR: 248676
Submitted by: daniel.engberg.lists@pyret.net
|
|
Sun, 19 Jan 2020
|
[ 15:45 lwhsu ]
- Update to 1.25.7
|
|
Tue, 26 Nov 2019
|
[ 18:37 kai ]
net/py-urllib3: Update to 1.25.6
* Convert the RUN_DEPENDS into separate OPTIONS as they are listed as extra
dependencies in setup.py. Also set those as default that contain the
previous RUN_DEPENDS to allow a clean transition.
* Remove the Python-specific version limitation for security/py-certifi
because it's required for all Python versions.
* Also remove the info about the broken IPv6 support of net/py-socks (was
broken in 1.5.7) and the relevant patch as both are obsolete.
* Update the TEST_DEPENDS and add a "do-test" target to make future QA easier.
Please note that a MFH won't be done as it didn't get an approval because (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jun 2018
|
[ 17:05 mat ] (Only the first 10 of 1617 ports in this commit are shown above. )
Use PY_FLAVOR for dependencies.
FLAVOR is the current port's flavor, it should not be used outside of
this scope.
Sponsored by: Absolight
|
|
Tue, 5 Jun 2018
|
[ 20:55 antoine ]
Revert r471788, it breaks lots of ports
With hat: portmgr
|
[ 18:56 sunpoet ]
Update to 1.23
Changes: https://github.com/shazow/urllib3/blob/master/CHANGES.rst
|
|
Sat, 10 Feb 2018
|
[ 19:59 sunpoet ]
Simplify Makefile: use PY_IPADDRESS
|
|
Thu, 30 Nov 2017
|
[ 15:50 mat ] (Only the first 10 of 2423 ports in this commit are shown above. )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 20 Aug 2017
|
[ 12:29 sunpoet ]
Add TEST_DEPENDS
- Allow concurrent installation (USE_PYTHON=concurrent)
|
|
Fri, 21 Jul 2017
|
[ 17:30 sunpoet ]
Update to 1.22
Changes: https://github.com/shazow/urllib3/blob/master/CHANGES.rst
|
|
Sat, 10 Jun 2017
|
[ 03:21 woodsb02 ]
net/py-urllib3: Fix build with Python 3.3
PR: 219833
Reported by: koobs
Approved by: portmgr blanket
|
|
Wed, 7 Jun 2017
|
[ 14:47 woodsb02 ]
[NEW] net/py3-urllib3: Create Python 3.x version of port
The latest www/py-requests update [1] unbundled its dependencies, now
requiring chardet, idna, urllib3 and certifi from ports.
www/py3-requests port was not tested during QA, which would have highlighted
the need for many new py3-* ports (and their dependencies).
This change creates one of those ports.
[1] https://svnweb.freebsd.org/changeset/ports/442565
PR: 219833
|
|
Wed, 3 May 2017
|
[ 21:54 sunpoet ]
Update to 1.21.1
Changes: https://github.com/shazow/urllib3/blob/master/CHANGES.rst
|
|
Wed, 26 Apr 2017
|
[ 18:46 sunpoet ]
Update to 1.21
- Update COMMENT
- Sort RUN_DEPENDS
- Sort USE_PYTHON
- Fix indent
- Update pkg-descr
- Change WWW to PyPI
Changes: https://github.com/shazow/urllib3/blob/master/CHANGES.rst
|
|
Sun, 19 Mar 2017
|
[ 16:11 rm ] (Only the first 10 of 11 ports in this commit are shown above. )
Pass maintainership to python@
|
[ 14:02 rene ] (Only the first 10 of 74 ports in this commit are shown above. )
Take in olivierd@'s commit bit on his request.
Submitted by: olivierd@
With hat: portmgr-secretary
|
|
Fri, 20 Jan 2017
|
[ 09:23 olivierd ]
Update to 1.20
Changelog:
https://github.com/shazow/urllib3/blob/1.20/CHANGES.rst#120-2017-01-19
|
|
Sat, 19 Nov 2016
|
[ 06:14 olivierd ]
Update to 1.19.1
|
|
Fri, 4 Nov 2016
|
[ 18:15 olivierd ]
Update to 1.19
|
|
Fri, 28 Oct 2016
|
[ 04:51 olivierd ]
Update to 1.18.1
Changelog: https://github.com/shazow/urllib3/blob/1.18.1/CHANGES.rst
MFH: 2016Q4
Security: c5c6e293-9cc7-11e6-823f-b8aeed92ecc4
|
|
Wed, 28 Sep 2016
|
[ 04:32 olivierd ]
Update to 1.18
|
|
Tue, 6 Sep 2016
|
[ 17:07 olivierd ]
- Update to 1.17
- Add pkg-message, because PySocks (net/py-pysocks) 1.5.7 causes problems
with IPv6 (bug #964)
|
|
Tue, 26 Jul 2016
|
[ 19:39 olivierd ]
Make security/py-certifi conditional, because this module is already included
in Python >= 3.4
Reported by: demon@ (private email)
|
|
Sun, 26 Jun 2016
|
[ 20:06 olivierd ]
net/py-ndg_httpsclient is fully compatible with Python2 and Python3 (r417571)
|
|
Sun, 12 Jun 2016
|
[ 19:30 olivierd ]
Update to 1.16
|
|
Tue, 12 Apr 2016
|
[ 16:04 olivierd ]
Update to 1.15.1
|
|
Fri, 1 Apr 2016
|
[ 14:16 mat ] (Only the first 10 of 2612 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 30 Dec 2015
|
[ 09:20 olivierd ]
Update to 1.14
Changelog:
https://github.com/shazow/urllib3/blob/master/CHANGES.rst#114-2015-12-29
|
|
Sat, 19 Dec 2015
|
[ 14:59 olivierd ]
Update to 1.13.1
Changelog:
https://github.com/shazow/urllib3/blob/master/CHANGES.rst#1131-2015-12-18
|
|
Thu, 17 Dec 2015
|
[ 04:54 olivierd ]
Update to 1.13
Changelog:
https://github.com/shazow/urllib3/blob/master/CHANGES.rst#113-2015-12-14
|
|
Thu, 10 Sep 2015
|
[ 14:15 olivierd ]
- Update to 1.12
- Add NO_ARCH
Changelog:
https://github.com/shazow/urllib3/blob/master/CHANGES.rst#112-2015-09-03
|
|
Wed, 22 Jul 2015
|
[ 19:34 olivierd ]
Update to 1.11
|
|
Tue, 26 May 2015
|
[ 16:47 antoine ] (Only the first 10 of 37 ports in this commit are shown above. )
Switch PYTHON_REL from a 3 digits number to a 4 digits number to handle
python 2.7.10
Differential Revision: https://reviews.freebsd.org/D2639
Reviewed by: sunpoet, mva
|
|
Sun, 3 May 2015
|
[ 16:53 olivierd ]
Update to 1.10.4
Changelog:
https://github.com/shazow/urllib3/blob/master/CHANGES.rst#1104-2015-05-03
|
|
Wed, 22 Apr 2015
|
[ 19:36 olivierd ]
Update to 1.10.3
Changelog:
https://github.com/shazow/urllib3/blob/master/CHANGES.rst#1103-2015-04-21
|
|
Tue, 3 Mar 2015
|
[ 18:19 olivierd ]
Update to 1.10.2
ChangeLog: https://github.com/shazow/urllib3/blob/master/CHANGES.rst#dev-master
|
|
Wed, 11 Feb 2015
|
[ 05:30 olivierd ]
Update to 1.10.1
ChangeLog: https://github.com/shazow/urllib3/blob/master/CHANGES.rst#dev-master
|
|
Wed, 31 Dec 2014
|
[ 14:54 olivierd ]
Update to 1.10
ChangeLog:
https://github.com/shazow/urllib3/blob/master/CHANGES.rst#110-2014-12-14
|
|
Mon, 10 Nov 2014
|
[ 14:22 olivierd ]
- Update to 1.9.1
ChangeLog:
https://github.com/shazow/urllib3/blob/master/CHANGES.rst#191-2014-09-13
|
|
Fri, 29 Aug 2014
|
[ 20:57 olivierd ] (Only the first 10 of 14 ports in this commit are shown above. )
- Convert my own Python ports to USES= python
|
|
Sat, 12 Jul 2014
|
[ 12:46 olivierd ]
- Update to 1.9
ChangeLog:
https://github.com/shazow/urllib3/blob/master/CHANGES.rst#19-2014-07-04
|
|
Tue, 24 Jun 2014
|
[ 20:12 olivierd ]
- Update to 1.8.3
- Add LICENSE_FILE
ChangeLog:
https://github.com/shazow/urllib3/blob/master/CHANGES.rst#183-2014-06-23
|
|
Tue, 22 Apr 2014
|
[ 18:42 olivierd ]
- Update to 1.8.2
- Use PYDISTUTILS_AUTOPLIST
|
|
Thu, 6 Mar 2014
|
[ 18:37 olivierd ]
- Update to 1.8
ChangeLog:
https://github.com/shazow/urllib3/blob/master/CHANGES.rst#18-2014-03-04
|
|
Fri, 24 Jan 2014
|
[ 13:34 olivierd ] (Only the first 10 of 27 ports in this commit are shown above. )
Convert my own Python ports to:
- STAGEDIR
- Replace USE_PYDISTUTILS= easy_install by USE_PYDISTUTILS= yes
While I'm here
- Use PYDISTUTILS_AUTOPLIST
- Adjust or add LICENSE
|
|
Sat, 28 Sep 2013
|
[ 14:46 olivierd ]
- Update to 1.7.1
- Use PYTHON_PY3K_PLIST_HACK
ChangeLog:
https://github.com/shazow/urllib3/blob/1.7.1/CHANGES.rst#171-2013-09-25
|
|
Fri, 20 Sep 2013
|
[ 22:10 bapt ] (Only the first 10 of 1288 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
net)
|
|
Sat, 31 Aug 2013
|
[ 04:05 olivierd ]
- Update to 1.7
- Fix pkg-plist with Python 2 and Python 3
|
|
Sat, 27 Apr 2013
|
[ 20:07 olivierd ]
- Update to 1.6
Based on PR: 170987 (update to 1.5)
Submitted by: koobs@
|
|
Thu, 9 Aug 2012
|
[ 20:00 olivierd ]
- Update to 1.4
- Update maintainer address
Submitted by: myself
Approved by: miwi, rene (mentors)
|
|
Tue, 10 Apr 2012
|
[ 07:27 miwi ]
- Update to 1.3
PR: 166419
Submitted by: Olivier Duchateau <duchateau.olivier@gmail.com> (maintainer)
|
|
Sun, 4 Mar 2012
|
[ 12:39 miwi ]
- Update to 1.2.2
PR: 164856
Submitted by: Olivier Duchateau <duchateau.olivier@gmail.com> (maintainer)
|
|
Tue, 7 Feb 2012
|
[ 04:31 miwi ]
- Update to 1.2
PR: 164644
Submitted by: maintainer
|
|
Sat, 14 Jan 2012
|
[ 19:26 miwi ]
Urllib3 is an HTTP library with thread-safe connection pooling, and file
post.
WWW: http://urllib3.readthedocs.org/
PR: ports/163972
Submitted by: Olivier Duchateau <duchateau.olivier@gmail.com>
|
Number of commits found: 76 |
As an Amazon Associate I earn from qualifying purchases.