notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Want a good monitor light? See my photosAll times are UTC
Ukraine
This referral link gives you 10% off a Fastmail.com account and gives me a discount on my Fastmail account.

Get notified when packages are built

A new feature has been added. FreshPorts already tracks package built by the FreeBSD project. This information is displayed on each port page. You can now get an email when FreshPorts notices a new package is available for something on one of your watch lists. However, you must opt into that. Click on Report Subscriptions on the right, and New Package Notification box, and click on Update.

Finally, under Watch Lists, click on ABI Package Subscriptions to select your ABI (e.g. FreeBSD:14:amd64) & package set (latest/quarterly) combination for a given watch list. This is what FreshPorts will look for.

Port details
py-pynsq Official Python client library for NSQ
0.9.1 net on this many watch lists=0 search for ports that depend on this port Find issues related to this port Report an issue related to this port View this port on Repology. pkg-fallout 0.9.1Version of this port present on the latest quarterly branch.
Maintainer: bofh@FreeBSD.org search for ports maintained by this maintainer
Port Added: 2013-06-22 10:43:44
Last Update: 2023-06-27 19:34:34
Commit Hash: 3d9a815
Also Listed In: python
License: MIT
WWW:
https://github.com/nsqio/pynsq
Description:
The official Python client library for NSQ It provides high-level nsq.Reader and nsq.Writer classes for building consumers and producers and two low-level modules for both sync and async communication over the NSQ Protocol (if you wanted to write your own high-level functionality).
Homepage    cgit ¦ Codeberg ¦ GitHub ¦ GitLab ¦ SVNWeb

Manual pages:
FreshPorts has no man page information for this port.
pkg-plist: as obtained via: make generate-plist
There is no configure plist information for this port.
Dependency lines:
  • ${PYTHON_PKGNAMEPREFIX}pynsq>0:net/py-pynsq@${PY_FLAVOR}
To install the port:
cd /usr/ports/net/py-pynsq/ && make install clean
To add the package, run one of these commands:
  • pkg install net/py-pynsq
  • pkg install py39-pynsq
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-pynsq listed in the above command, you can pick from the names under the Packages section.
PKGNAME: py39-pynsq
Package flavors (<flavor>: <package>)
  • py39: py39-pynsq
distinfo:
TIMESTAMP = 1646907567 SHA256 (nsqio-pynsq-v0.9.1_GH0.tar.gz) = 5816d2c4256864c6368e742bf0b525c7aca426c63a4ad37a815162af915d8685 SIZE (nsqio-pynsq-v0.9.1_GH0.tar.gz) = 45552

Packages (timestamps in pop-ups are UTC):
py37-pynsq
ABIaarch64amd64armv6armv7i386powerpcpowerpc64powerpc64le
FreeBSD:13:latest--0.9.0b1---0.9.0b1-
FreeBSD:13:quarterly--------
FreeBSD:14:latest--------
FreeBSD:14:quarterly--------
FreeBSD:15:latest--n/a-n/a---
 

py39-pynsq
ABIaarch64amd64armv6armv7i386powerpcpowerpc64powerpc64le
FreeBSD:13:latest0.9.10.9.1-0.9.10.9.1---
FreeBSD:13:quarterly0.9.10.9.10.9.10.9.10.9.10.9.10.9.10.9.1
FreeBSD:14:latest0.9.10.9.10.9.10.9.10.9.10.9.1-0.9.1
FreeBSD:14:quarterly0.9.10.9.1-0.9.10.9.10.9.10.9.10.9.1
FreeBSD:15:latest0.9.10.9.1n/a0.9.1n/a0.9.10.9.10.9.1
 

Dependencies
NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
Build dependencies:
  1. py39-setuptools>=63.1.0 : devel/py-setuptools@py39
  2. python3.9 : lang/python39
Test dependencies:
  1. py39-pytest>=3.3.1 : devel/py-pytest@py39
  2. py39-mock>0 : devel/py-mock@py39
  3. py39-python-snappy>0 : archivers/py-python-snappy@py39
  4. nsqd : net/nsq
  5. python3.9 : lang/python39
Runtime dependencies:
  1. py39-tornado>0 : www/py-tornado@py39
  2. py39-setuptools>=63.1.0 : devel/py-setuptools@py39
  3. python3.9 : lang/python39
There are no ports dependent upon this port

Configuration Options:
No options to configure
Options name:
net_py-pynsq
USES:
python
FreshPorts was unable to extract/find any pkg message
Master Sites:
Expand this list (1 items)
Collapse this list.
  1. https://codeload.github.com/nsqio/pynsq/tar.gz/v0.9.1?dummy=/
Collapse this list.

Number of commits found: 23

Commit History - (may be incomplete: for full details, see links to repositories near top of page)
CommitCreditsLog message
0.9.1
27 Jun 2023 19:34:34
commit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacbcommit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacbcommit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacbcommit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacb files touched by this commit
Rene Ladan (rene) search for other commits by this committer
all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>
07 Sep 2022 21:58:51
commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4 files touched by this commit
Stefan Eßer (se) search for other commits by this committer
Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)
0.9.1
07 Sep 2022 21:10:59
commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52 files touched by this commit
Stefan Eßer (se) search for other commits by this committer
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
0.9.1
20 Jul 2022 14:22:37
commit hash: 6a378e5659b93de6dbe8956246fb3bf971677624commit hash: 6a378e5659b93de6dbe8956246fb3bf971677624commit hash: 6a378e5659b93de6dbe8956246fb3bf971677624commit hash: 6a378e5659b93de6dbe8956246fb3bf971677624 files touched by this commit
Tobias C. Berner (tcberner) search for other commits by this committer
net: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ports@c0decafe.net>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Adam Jette <jettea46@yahoo.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Bakhtin <Alex.Bakhtin@gmail.com>
  *  Alex Deiter <Alex.Deiter@Gmail.COM>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
(Only the first 15 lines of the commit message are shown above View all of this commit message)
0.9.1
12 Mar 2022 10:36:39
commit hash: b10f4580ebf08052e4fc35e1e56f97f7f5e157eacommit hash: b10f4580ebf08052e4fc35e1e56f97f7f5e157eacommit hash: b10f4580ebf08052e4fc35e1e56f97f7f5e157eacommit hash: b10f4580ebf08052e4fc35e1e56f97f7f5e157ea files touched by this commit
Muhammad Moinur Rahman (bofh) search for other commits by this committer
net/py-pynsq: Update version 0.9.0b1=>0.9.1

Relnotes: https://github.com/nsqio/pynsq/blob/master/setup.py
0.9.0b1_1
08 Mar 2022 02:09:57
commit hash: bc808e2bfff33c5b4260c571ee628017ca41f1b9commit hash: bc808e2bfff33c5b4260c571ee628017ca41f1b9commit hash: bc808e2bfff33c5b4260c571ee628017ca41f1b9commit hash: bc808e2bfff33c5b4260c571ee628017ca41f1b9 files touched by this commit
Muhammad Moinur Rahman (bofh) search for other commits by this committer
*/*: Take maintainership
0.9.0b1_1
07 Mar 2022 19:07:39
commit hash: 3d89f95e2ff861b1e06ad114422b5d116a856970commit hash: 3d89f95e2ff861b1e06ad114422b5d116a856970commit hash: 3d89f95e2ff861b1e06ad114422b5d116a856970commit hash: 3d89f95e2ff861b1e06ad114422b5d116a856970 files touched by this commit
Rene Ladan (rene) search for other commits by this committer
all: return koobs' ports to the pool after safekeeping his commit bit.
0.9.0b1_1
06 Apr 2021 14:31:07
commit hash: 305f148f482daf30dcf728039d03d019f88344ebcommit hash: 305f148f482daf30dcf728039d03d019f88344ebcommit hash: 305f148f482daf30dcf728039d03d019f88344ebcommit hash: 305f148f482daf30dcf728039d03d019f88344eb files touched by this commit
Mathieu Arnold (mat) search for other commits by this committer
Remove # $FreeBSD$ from Makefiles.
0.9.0b1_1
26 Jan 2021 19:24:23
Revision:562987Original commit files touched by this commit
sunpoet search for other commits by this committer
Change RUN_DEPENDS from py-tornado to py-tornado5

- Bump PORTREVISION for dependency change
0.9.0b1
28 Dec 2020 23:02:15
Revision:559531Original commit files touched by this commit
antoine search for other commits by this committer
Drop python 2.7 support from a few ports

With hat:	portmgr
0.9.0b1
05 May 2019 11:06:40
Revision:500853Original commit files touched by this commit
koobs search for other commits by this committer
net/py-pynsq: Update to 0.9.0b1

This beta brings Tornado > 5 support (our py-tornado port is > 5)

Changelog:

  https://github.com/nsqio/pynsq/blob/v0.9.0b1/ChangeLog.md
0.6.9
20 Jun 2018 17:05:44
Revision:472884Original commit files touched by this commit
mat search for other commits by this committer
Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight
0.6.9
30 Nov 2017 15:50:34
Revision:455210Original commit files touched by this commit Sanity Test Failure
mat search for other commits by this committer
Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
0.6.9
01 Apr 2016 14:16:20
Revision:412348Original commit files touched by this commit
mat search for other commits by this committer
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight
0.6.9
25 Feb 2016 13:48:06
Revision:409516Original commit files touched by this commit
koobs search for other commits by this committer
net/py-pynsq: Update to 0.6.9, Modernize

- Update PORTVERSION and distinfo checksum (0.6.9)
- Update TEST_DEPENDS and test target
- Remove TESTS option bits accordingly
- Sort USE{S} entries
- Enable NO_ARCH (architecture independent)
- Patch setup.py to remove unnecessary tornado entry and exclude tests
  from installation, for a future upstream patch that adds tests to the
  PyPI sdist.

Changes:

  https://github.com/nsqio/pynsq/blob/v0.6.9/ChangeLog.md
0.5.1_1
17 Aug 2015 14:20:41
Revision:394508Original commit files touched by this commit
mat search for other commits by this committer
Remove UNIQUENAME and LATEST_LINK.

UNIQUENAME was never unique, it was only used by USE_LDCONFIG and now,
we won't have conflicts there.

Use PKGBASE instead of LATEST_LINK in PKGLATESTFILE, the *only* consumer
is pkg-devel, and it works just fine without LATEST_LINK as pkg-devel
has the correct PKGNAME anyway.

Now that UNIQUENAME is gone, OPTIONSFILE is too. (it's been called
OPTIONS_FILE now.)

Reviewed by:	antoine, bapt
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3336
0.5.1_1
07 May 2015 17:26:06
Revision:385640Original commit files touched by this commit
mat search for other commits by this committer
Update ports in the n* categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight
0.5.1_1
24 Oct 2014 16:21:26
Revision:371449Original commit files touched by this commit
mva search for other commits by this committer
- Convert ports of net/ to new USES=python

Approved by:	portmgr (implicit)
0.5.1_1
14 Jun 2014 11:13:34
Revision:357768Original commit files touched by this commit
mva search for other commits by this committer
- Remove easy_install dependency
- Bump PORTREVISION to enforce a cleanup for the easy_install references

With hat:	python@
Approved by:	portmgr (implicit)
0.5.1
30 Nov 2013 18:27:05
Revision:335316Original commit files touched by this commit
koobs search for other commits by this committer
net/py-pynsq: Add LICENSE

- Add LICENSE (MIT), thanks Matt! [1]

[1] https://github.com/bitly/pynsq/issues/56
0.5.1
30 Nov 2013 17:26:05
Revision:335307Original commit files touched by this commit
koobs search for other commits by this committer
net/py-pynsq: Update to 0.5.1

- Update to 0.5.1
- Enable STAGE support
- Enable AUTOPLIST, delete pkg-plist
- Sort USE_* and GH_* sections
- Remove upstreamed setup.py patch and post-patch: target

Changes:

 https://github.com/bitly/pynsq/blob/v0.5.1/ChangeLog.md
0.4.2
20 Sep 2013 22:10:25
Revision:327755Original commit files touched by this commit
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
net)
0.4.2
22 Jun 2013 10:43:26
Revision:321560Original commit files touched by this commit
koobs search for other commits by this committer
net/py-pynsq: [NEW PORT] The official Python client library for NSQ

pynsq provides high-level nsq.Reader and nsq.Writer classes for building
consumers and producers and two low-level modules for both sync and async
communication over the NSQ Protocol (if you wanted to write your own
high-level functionality).

WWW: https://github.com/bitly/pynsq

Number of commits found: 23