| Port details |
- py-iplib Convert amongst many different IPv4 notations
- 1.2.1 net
 =0      1.2.1Version of this port present on the latest quarterly branch. - Maintainer: egypcio@FreeBSD.org
- Port Added: 2010-02-25 13:48:38
- Last Update: 2023-06-27 19:34:34
- Commit Hash: 3d9a815
- Also Listed In: python
- License: BSD3CLAUSE
- WWW:
- https://pypi.org/project/iplib/
- Description:
- You can use this Python module to convert amongst many different
notations and to manage couples of address/netmask in the CIDR
notation.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}iplib>0:net/py-iplib@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/net/py-iplib/ && make install clean
- To add the package, run one of these commands:
- pkg install net/py-iplib
- pkg install py39-iplib
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-iplib listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-iplib
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1541605744
SHA256 (iplib-1.2.1.tar.gz) = dd55f6accded7f18053f930fe72acc4c5a55d7c028698373127c84f836399ab9
SIZE (iplib-1.2.1.tar.gz) = 10896
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- net_py-iplib
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
1.2.1
27 Jun 2023 19:34:34
 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
1.2.1
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
1.2.1
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
1.2.1
20 Jul 2022 14:22:37
|
Tobias C. Berner (tcberner) |
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com> (Only the first 15 lines of the commit message are shown above ) |
1.2.1
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
1.2.1
28 Dec 2020 23:02:15
 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
1.2.1
05 Dec 2018 14:09:12
|
egypcio |
use @FreeBSD.org as MAINTAINER instead of my private address
benchmarks/vegeta
devel/busybee
devel/git-lfs
devel/gnu-efi
devel/hub
devel/libe
devel/py-fabric3
devel/py-fabric3
dns/dhisd
dns/dnscrypt-proxy2
dns/go-geodns
emulators/hatari
irc/weechat-otr (Only the first 15 lines of the commit message are shown above ) |
1.2.1
08 Nov 2018 07:48:55
|
egypcio |
net/py-iplib: update to v1.2.1
* while here, adopt the port;
* new version taken from https://pypi.org/project/iplib/ (CHEESEPOP);
* added LICENSE;
* added flavors to USE_PYTHON.
Approved by: beat (mentor)
Differential Revision: https://reviews.freebsd.org/D17893 |
1.1_1
25 Apr 2018 16:42:38
|
amdmi3 |
Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.
Approved by: portmgr blanket, mat |
1.1_1
24 Oct 2014 16:21:26
|
mva |
- Convert ports of net/ to new USES=python
Approved by: portmgr (implicit) |
1.1_1
30 Jun 2014 05:51:03
|
eadler |
multiple: reset gslin's maintainer
By request of Gea-Suan Lin <gslin@gslin.org> - reset ports to ports@FreeBSD.
Gea-Suan Lin's work is much appreciated.
Approved by: portmgr (implicit) (not really, skipping NO_STAGE check) |
1.1_1
31 Jan 2014 07:52:05
|
miwi |
- Convert to PYDISTUTILS_AUTOPLIST
- Stage support
- Bump PORTREV |
1.1
21 Jan 2014 23:40:23
|
bapt |
Fix properties on pkg-plist |
1.1
20 Nov 2013 20:51:25
|
sunpoet |
- Update WWW:
- http://cheeseshop.python.org/ -> https://pypi.python.org/
- http://pypi.python.org/ -> https://pypi.python.org/
With hat: python
Approved by: bapt (portmgr) |
1.1
20 Sep 2013 22:10:25
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
net) |
1.1
20 Mar 2011 12:54:45
|
miwi |
- Get Rid MD5 support |
1.1
25 Feb 2010 13:48:11
|
miwi |
You can use this Python module to convert amongst many different
notations and to manage couples of address/netmask in the CIDR
notation.
WWW: http://pypi.python.org/pypi/iplib
PR: ports/144197
Submitted by: Gea-Suan Lin <gslin at gslin.org>
Feature safe: yes |
As an Amazon Associate I earn from qualifying purchases.