Port details on branch 2022Q2 |
- ntp The Network Time Protocol Distribution
- 4.2.8p17_2 net =59 4.2.8p17_2Version of this port present on the latest quarterly branch.
- Maintainer: cy@FreeBSD.org
- Port Added: unknown
- Last Update: 2024-03-01 21:11:20
- Commit Hash: 21d9127
- People watching this port, also watch:: wget, nmap, png, unzip, gmake
- License: not specified in port
- WWW:
- https://www.ntp.org/
- Description:
- The Network Time Protocol (NTP) is used to synchronize the time of a
computer client or server to another server or reference time source,
such as a radio or satellite receiver or modem.
It provides client accuracies typically within a millisecond on LANs
and up to a few tens of milliseconds on WANs relative to a primary
server synchronized to Coordinated Universal Time (UTC) via a Global
Positioning Service (GPS) receiver, for example.
Typical NTP configurations utilize multiple redundant servers and diverse
network paths, in order to achieve high accuracy and reliability.
Some configurations include cryptographic authentication to prevent
accidental or malicious protocol attacks.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- Conflicts:
- CONFLICTS:
- Conflicts Matches:
-
There are no Conflicts Matches for this port. This is usually an error.
- To install the port:
- cd /usr/ports/net/ntp/ && make install clean
- To add the package, run one of these commands:
- pkg install net/ntp
- pkg install ntp
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: ntp
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1686054066
SHA256 (ntp-4.2.8p17.tar.gz) = 103dd272e6a66c5b8df07dce5e9a02555fcd6f1397bdfb782237328e89d3a866
SIZE (ntp-4.2.8p17.tar.gz) = 7120469
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- pkgconf>=1.3.0_1 : devel/pkgconf
- gettext-runtime>=0.22_1 : devel/gettext-runtime
- autoconf>=2.71 : devel/autoconf
- automake>=1.16.5 : devel/automake
- libtoolize : devel/libtool
- perl5>=5.36<5.37 : lang/perl5.36
- Runtime dependencies:
-
- perl5>=5.36<5.37 : lang/perl5.36
- Library dependencies:
-
- libevent.so : devel/libevent
- libedit.so.0 : devel/libedit
- libintl.so : devel/gettext-runtime
- There are no ports dependent upon this port
Configuration Options:
- ===> The following configuration options are available for ntp-4.2.8p17_2:
ACTS=on: Enable ACTS modem service
ARBITER=on: Enable Arbiter 1088A/B GPS receiver
ARCRON_MSF=on: Enable Arcron MSF receiver
AS2201=on: Enable Austron 2200A/2201A GPS receiver
ATOM=on: Enable ATOM PPS interface
AUDIO_CHU=off: Enable CHU audio/decoder
BANCOMM=off: Enable Datum/Bancomm bc635/VME interface
CHRONOLOG=on: Enable Chrono-log K-series WWVB receiver
CHU=on: Enable CHU modem/decoder
COMPUTIME=off: Enable Diem Computime Radio Clock
DATUM=on: Enable Datum Programmable Time System
DCF7000=off: Enable ELV/DCF7000 clock
DEBUG=off: Build with debugging support
DOCS=on: Build and/or install documentation
DUMBCLOCK=on: Enable Dumb generic hh:mm:ss local clock
EXAMPLES=on: Build and/or install examples
FG=on: Enable Forum Graphic GPS
GPSVME=off: Enable TrueTime GPS receiver/VME interface
HEATH=on: Enable Heath GC-1000 WWV/WWVH receiver
HOPF6021=off: Enable HOPF 6021 clock
HOPFPCI=on: Enable hopf 6039 PCI board
HOPFSERIAL=on: Enable hopf serial clock device
HPGPS=on: Enable HP 58503A GPS receiver
IPV6=on: IPv6 protocol support
IRIG=on: Enable IRIG audio decoder
JJY=on: Enable JJY receiver
JUPITER=on: Enable Rockwell Jupiter GPS receiver
LEITCH=on: Enable Leitch CSD 5300 Master Clock
LOCAL_CLOCK=on: Enable local clock reference
MD5=off: Add libwww md5 dependency for sntp (implies SSL)
MEINBERG=off: Enable Meinberg clocks
MX4200=off: Enable Magnavox MX4200 GPS receiver
NEOCLOCK4X=on: Enable NeoClock4X DCF77 / TDF receiver
NLS=on: Native Language Support
NMEA=on: Enable NMEA GPS receiver
NTPSNMPD=off: Build and install ntpsnmpd
NTP_SIGND=off: Enable signed NTP
ONCORE=on: Enable Motorola VP/UT Oncore GPS receiver
PALISADE=on: Enable Palisade clock
PCF=on: Enable Conrad parallel port radio clock
PERL_UTILS=on: Install ntp-wait and ntptrace utilities
PST=on: Enable PST/Traconex 1020 WWV/WWVH receiver
RAWDCF=off: Enable DCF77 raw time code
RCC8000=off: Enable RCC 8000 clock
RIPENCC=off: Enable RIPENCC specific Trimble driver
SCHMID=off: Enable Schmid DCF77 clock
SEL240X=off: Enable SEL 240X clocks
SHM=on: Enable SHM clock attached thru shared memory
SPECTRACOM=on: Enable Spectracom 8170/Netclock/2 WWVB
SSL=on: SSL protocol support
THREADS=on: Threading support
TRIMTAIP=off: Enable Trimble GPS receiver/TAIP protocol
TRIMTSIP=off: Enable Trimble GPS receiver/TSIP protocol
TRUETIME=on: Enable Kinemetrics/TrueTime receivers
ULINK=on: Enable Ultralink WWVB receiver
VARITEXT=off: Enable VARITEXT clock
WHARTON=off: Enable WHARTON 400A Series clock
WWV=on: Enable WWV Audio receiver
ZYFER=on: Enable Zyfer GPStarplus receiver
===> Use 'make config' to modify these settings
- Options name:
- net_ntp
- USES:
- cpe pathfix shebangfix libedit libtool localbase:ldflags pkgconfig autoreconf gettext-runtime perl5 ssl
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|