all: Bump after lang/go121 update

MFH:		2024Q2

net/geoipupdate: Update to 7.0.1

 *  BREAKING CHANGE: Improvements to the HTTP download API.
 *  The client now calls two new endpoints:
     -  /geoip/updates/metadata which is responsible for getting information
about
        a database edition.
     -  /geoip/databases/{edition-id}/download which is responsible for
downloading
        the content of a database edition. This new endpoint redirects downloads
to R2
        presigned URLs, so systems running geoipupdate need to be able to
        reach
     - 
mm-prod-geoip-databases.a2649acb697e2c09b632799562c076f2.r2.cloudflarestorage.com
        in addition to updates.maxmind.com.
 *  BREAKING CHANGE: The public package API has been redesigned. The previous
    API was not easy to use and had become a maintenance burden. We now
    expose a Client at github.com/maxmind/geoipupdate/client with a

lang/go: Change DEFAULT to 1.21

PR:		277776
Approved by:	portmgr (exp-run)

all: Bump PORTREVISION after lang/go* update

PR:		276530

net/geoipupdate: Sanitize MANPREFIX

Approved by:    portmgr (blanket)

net/geoipupdate: Update to 6.1.0

all: Bump PORTREVISION after lang/go* update

PR:		274405

net/geoipupdate: Fix config file path in pkg-message

all: Bump PORTREVISION after lang/go* update

all: Bump PORTREVISION after lang/go{119,120} update

net/geoipupdate: Update to 6.0.0

net/geoipupdate: Update to 5.1.1

net/geoipupdate: Update to 5.1.0

net/geoipupdate: Update to 5.0.4

net/geoipupdate: Update to 5.0.3

net/geoipupdate: Update to 5.0.2

net/geoipupdate: Update to 5.0.1

net/geoipupdate: Update to 5.0.0

all: Bump PORTREVISION after lang/go{119,120} update

net/geoipupdate: Enable verbose build

net/geoipupdate: Update to 4.11.1

net/geoipupdate: Update to 4.11.0

all: Bump PORTREVISION after Go ports update

all: Bump PORTREVISION after lang/go{119,120} update

all: Bump PORTREVISION after GO_DEFAULT update.

all: Bump PORTVERSION after lang/go{118,119} update

all: Bump PORTREVISION after lang/go{118,119} update

all: Bump PORTREVISION after lang/go{118,119} update

net/geoipupdate: Update to 4.10.0

all: Bump PORTREVISION after lang/go{118,119} update

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

all: Bump PORTREVISION after Go update

Bump Go ports PORTREVISION after GO_DEFAULT and lang/go118 update.

net: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ports@c0decafe.net>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Adam Jette <jettea46@yahoo.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Bakhtin <Alex.Bakhtin@gmail.com>
  *  Alex Deiter <Alex.Deiter@Gmail.COM>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>

all: Bump PORTREVISION after lang/go{117,118} update

*/*: Bump port revisons after lang/go{117,118} update

net/geoipupdate, www/caddy: Remove ca_root_nss

Now that 12.3 is the minimum supported, remove ca_root_nss hard
deps. For systems that have caroot, ca_root_nss is to my knowledge
vestigial and unused, and does nothing except install things.

*/*: Bump PORTREVISION after lang/go 1.18 update

net/geoipupdate: Update to 4.9.0

net/geoipupdate: Update to 4.8.0

net/geoipupdate: Use go:modules to eliminate GH_TUPLE

net/geoipupdate: Update to 4.7.1

net/geoipupdate: Update to 4.7.0

Remove # $FreeBSD$ from Makefiles.

net/geoipupdate: Update to 4.6.0

net/geoipupdate: switch to USES=go:modules

Switch to USES=go:modules and pass GO_ENV down to make in preparation for the
upcoming go1.16 release.

PR:		251268
Approved by:	adamw (maintainer)

net/geoipupdate: Update to 4.5.0

net/geoipupdate: Update to 4.4.0

geoipupdate: Fix version string

geoipupdate needs to be told which version it is. This version appears
only in some info strings, but it's still worth having it be correct.

geoipupdate: Update to 4.3.0

geoipupdate: Update to 4.2.2

Changes:  https://github.com/maxmind/geoipupdate/releases

geoipupdate: Take out unusable URL from instructions

Reported by:	Dewayne Geraghty
MFH:		2020Q1

geoipupdate: Add instructions for getting account ID/key

MaxMind now requires a (free) registered account to download any
of the databases, including the free ones. Registration and
download remain free--they just require an account now.

MFH:	2020Q1

geoipupdate: Update to 4.1.5

geoipupdate: Update to 4.1.4

geoipupdate: Update to 4.1.0

geoipupdate: Update to 4.0.5

geoipupdate: Update to 4.0.4

Convert all Go ports to USES=go

This allows for port testing with lang/go-devel via GO_PORT, setting
up the Go build environment in a single place, and is step one in
simplifying Go ports that often define too complicated do-build
targets themselves.

USES=go gains new arguments 'run' to add lang/go to RUN_DEPENDS and
'no_targets' for ports with composite builds that call 'go' themselves
and do not need the do-build/do-install targets of USES=go.

PR:		238849
Submitted by:	dg@syrec.org (also D20745)
Reviewed by:	mat, tobik
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D20746

geoipupdate: Remove stray \

Update geoipupdate to 4.0.3

Hack correct title/section into the geoipupdate manpages

Use lowdown to build manpages

Pandoc is a fantastic application. It's wonderful. I use it all the
time to write papers in markdown and have them converted to beautiful
LaTeX-driven PDFs. I have nothing against pandoc.

However, using it to make manpages is like driving a Mack truck down the
driveway to check the mailbox. On my system (8-core all-SSD on ZFS) it
takes nearly 6 hours to build pandoc, and also these days it doesn't
work (see PR below).

Instead, use lowdown to generate the manpages. They don't come out
exactly right, but it's close enough to be usable.

PR:		237878

Update geoipupdate to 4.0.2

The patch (previous commit) should make this jobs-safe

Update to 4.0.1

Add a MANPAGES option. If you're building this from source and don't
want to spend 2 hours on 200 ports, the manpages are the same as the
DOCS. Just use those.

Remove a remnant of that one time I tried to make USES=gmake play
nicely with USES=go.

Pass variables to make(1), rather than patching

Update geoipupdate to 4.0.0

It is now written in go, for reasons I guess.

Make the GeoIP and geoipupdate descriptions reflect reality

The difference is no longer paid vs. unpaid. There are free
versions of the GeoIP2 databases, and they are preferred when
supported.

Update geoipupdate to 3.1.1 and tag the LICENSE_FILE

Update geoipupdate to 3.1.0

Update geoipupdate to 3.0.1

Update geoipupdate to 3.0.0

Also, sort plist.

* BREAKING CHANGE: When downloading the free databases without a
  MaxMind account, you must either not have `AccountID`, `UserId`,
  or `LicenseKey` set in your configuration file or they must be set
  to the zero values previously recommended in our documentation. Any
  other value will cause an authorization error.
* BREAKING CHANGE: The configuration options `Protocol`,
  `SkipPeerVerification`, and `SkipHostnameVerification` are no longer
  supported. If they are present in the configuration file, they will
  be ignored. HTTPS with peer and hostname verification will be used
  on all requests.
* BREAKING CHANGE: The configuration file must have the `AccountID`

Don't uselessly patch Makefile.am when automake isn't being run

Use the pre-rolled tarball to avoid autoreconf

Update to 2.5.0

Also, create PREFIX/share/GeoIP, as it's needed with the default
configuration.

Note that conf option names have changed with this release, but the
old names will continue to work.

* Replace use of strnlen() due to lack of universal availability. First
  reported by Bill Cole. GitHub issue #71.
* Document the LockFile option in the GeoIP.conf man page. GitHub
  issue #64.
* Remove unused base64 library. PR by Mikhail Teterin. GitHub PR #68.
* Add the new configuration option PreserveFileTimes. If set,
  the downloaded files will get the same modification times as
  their original on the server. Default is 0 (unset).
  PR by Rainer Jung. GitHub PR #63.
* Use the correct types when calling curl_easy_setopt(). This fixes
  warnings generated by libcurl's typecheck-gcc.h. PR by Michael
  Kaufmann. GitHub PR #61.
* In GeoIP.conf, the UserId option was renamed to AccountID and the
  ProductIds option was renamed to EditionIDs. The old options will
  continue to work, but upgrading to the new names is recommended for
  forward compatibility.

Update to 2.4.0.


  * geoipupdate now checks that the database directory is writable.
    If it is not, it reports the problem and aborts.

  * geoipupdate now acquires a lock when starting up to ensure only
    one instance may run at a time. A new option, LockFile, exists to
    set the file to use as a lock. By default, LockFile is the file
    .geoipupdate.lock in the database directory.

  * geoipupdate now prints out additional information from the server
    when a download request results in something other than HTTP
    status 2xx. This provides more information when the API does not
    respond with a database file. In conjunction with changes to the
    download service itself, errors such as lacking a subscription no
    longer show up with the message "not a valid gzip file".

  * ${datarootdir}/GeoIP is now created on make install. Reported by
    Antonios Karagiannis. GitHub #29.

  * Previously, a variable named ERROR was used. This caused issues
    building on Windows. Reported by Gisle Vanem. GitHub #36.

Update to 2.3.1.

Update to 2.3.0.

  * geoipupdate now uses TCP keep-alive when compiled with cURL 7.25 or
    greater.
  * Previously, on an invalid gzip file, geoipupdate would output binary data
    to stderr. It now displays an appropriate error message.

Use USES=pathfix where applicable.

PR:		213195
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D8093

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Fix order of @sample args.

Caught by:	danfe

Update to 2.2.2.

Also, use localbase.mk instead of setting CPPFLAGS/LDFLAGS manually, and
use the new two-argument @sample instead of renaming and sed-ing.

USE_GITHUB: For the new support, fix DISTNAME to be more consistent.

When using GH_TAGNAME the DISTNAME would have GH_PROJECT and GH_ACCOUNT in
it. When not using GH_TAGNAME it would not have this. Now both cases
will add in the GH_PROJECT and GH_ACCOUNT.

Add special care to ensure that the DISTVERSION is not added in twice. If
a port does GH_TAGNAME=v${PORTVERSION} it will be added in twice though. For
that case DISTVERSIONPREFIX=v should be set and no GH_TAGNAME should be used.

empty() is used rather than (!defined || !${}) to support fmake.

The purpose of setting DISTNAME at all in these cases is to make it more clear
that the distfile is from *GITHUB* and to avoid collisions if a project were
to be renamed or moved. Without adding in GH_PROJECT and GH_ACCOUNT then there
are real risks that collisions on filenames would happen on renamed or moved
projects, which is fairly common. A GITHUB-generated file may not match
a custom-rolled or git-archive-rolled distfile.

PR:		199069
With hat:	portmgr
Testing done:	All USE_GITHUB ports without GH_COMMIT were
checksum/fetch/extract/WRKSRC tested.

Use the new USE_GITHUB format.

Update to 2.2.1.

Update to 2.1.0.

- Update GeoIP to 1.6.2 and switch to its new github location.

- Add net/geoipupdate, the formal tool to fetch updates. It is for paid
  subscribers. People using the free version should continue using the
  geoipupdate.sh script in net/GeoIP.

This program is used to fetch the GeoIP2 and GeoIP databases. It requires
an active GeoIP subscription.

Please see https://www.maxmind.com/en/geolocation_landing for details about
obtaining a subscription.

If you wish to install the free versions of the GeoIP databases, please
use the geoipudate.sh script provided in net/GeoIP.

WWW: https://github.com/maxmind/geoipupdate