20:25 tcberner 

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

00:15 jbeich 

devel/boost-*: update to 1.69.0

Changes:	http://www.boost.org/users/history/version_1_69_0.html
PR:		232525
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17645

 

15:41 rene 

Mark QT4 ports/functionality for removal on 2019-03-15

While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.

Submitted by:	tcberner
Reviewed by:	adridg, jhale, rene, tcberner
Approved by:	portmgr (implicit, flavor hook)
Differential Revision:	https://reviews.freebsd.org/D17741

 

06:58 jbeich 

devel/boost-*: update to 1.68.0

- Switch to C++14 for libboost_system to support C++14 consumers

Changes:	http://www.boost.org/users/history/version_1_68_0.html
PR:		229569
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D16165

 

22:18 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

 

17:39 tcberner 

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

 

13:57 jbeich 

devel/boost-*: update to 1.67.0

Changes:	http://www.boost.org/users/history/version_1_67_0.html
PR:		227427
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D15030

 

04:11 jbeich 

devel/boost-*: update to 1.66.0

Changes:	http://www.boost.org/users/history/version_1_66_0.html
PR:		223922
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D13279

 

00:08 jbeich 

devel/boost-*: update to 1.65.1

Changes:	http://www.boost.org/users/history/version_1_65_1.html
PR:		218835
Approved by:	maintainer timeout (1.65.1: 2 weeks; 1.65.0: 1 month)
Tested by:	jhibbits (on powerpc64, earlier version)
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D11582

 

00:05 jbeich 

devel/boost-*: enable C++11 features

PR:		218835
Obtained from:	https://github.com/DragonFlyBSD/DeltaPorts/pull/690
Approved by:	maintainer timeout (2 months)
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D11582

 

20:55 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

 

06:48 jbeich 

devel/boost-*: update to 1.64.0

Changes:	http://www.boost.org/users/history/version_1_64_0.html
PR:		218835
Approved by:	office (bapt)
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D10472

 

15:23 gerald 

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

 

14:45 mat 

Remove all USE_OPENSSL occurrences.

Sponsored by:	Absolight

 

16:23 fjoe 

- Don't use GH_ACCOUNT as PORTNAME is always "eiskaltdcpp" for all
eiskaltdcpp-* ports
- Reset PORTREVISION after version bump

 

20:02 adamw 

Convert a couple ports that use both _CMAKE_ON and _CMAKE_OFF to _CMAKE_BOOL.

Use options helpers all the way in math/carve, because I couldn't help myself.

 

14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

16:44 amdmi3 

- Switch to linguisttools_build

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

17:20 adamw 

net-p2p/eiskaltdcpp-cli
net-p2p/eiskaltdcpp-daemon
net-p2p/eiskaltdcpp-data
net-p2p/eiskaltdcpp-gtk
net-p2p/eiskaltdcpp-lib
net-p2p/eiskaltdcpp-qt

1. Update to 2.2.9
2. Stage
3. Chase for new build options: gtk30, libcanberra, json-rpc
4. Use master/slave relations

PR:		192869
Submitted by:	Vladimir Kondratiev

 

21:07 adamw 

Convert a bunch of USE_XZ to USES=tar:xz.

Approved by:	portmgr (not really, but touches unstaged ports)

 

15:57 bapt 

Reset maintainership for ports not staged with no pending PR

With hat:	portmgr

 

18:42 bapt 

Modernize LIB_DEPENDS

With hat:	portmgr

 

20:28 tijl 

Convert textproc/aspell to "USES=libtool tar:bzip2" and bump dependent ports

Approved by:	portmgr (implicit, PORTREVISION bump on unstaged port)

 

20:55 gerald 

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

 

00:52 gerald 

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

 

22:28 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
net-p2p)

 

16:27 gerald 

Replace USE_GCC=4.6+ and USE_GCC=4.4+ by USE_GCC=yes.

Right now this is a noop in the former case and a noop in the latter
case unless lang/gcc44 has been installed explicitly.

This puts a bit more emphasis on standardizing on a canonical version
"current" GCC and makes it easier to update that canonical version
by changing the default in Mk/bsd.gcc.mk and updating the lang/gcc port.

That is, USE_GCC=yes means "use a decent/modern version of GCC" without
having to worry about details.

Approved by:	portmgr (bdrewery)

 

22:35 ak 

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

 

17:34 fjoe 

- Unbreak the build (link with -lboost_system)
- Fix COMMENT for eiskaltdcpp-cli
- Take maintainership

Approved by:	MAINTAINER

 

16:44 bapt 

Convert to new options framework

 

10:44 ak 

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

 

20:06 makc 

- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
  for users

Approved by:	portmgr (miwi)

 

04:05 gerald 

Replace the use of _GCC_BUILD_DEPENDS (which was never meant to be
used outside of Mk/bsd.gcc.mk) by _GCC_RUNTIME.  This is still not
ideal, but at least a documented stopgap, and it avoids the manual
construction of the directory to be added to rpath.

As a side effect, the Makefiles become a tad simpler.  On the way,
update to USE_GCC=4.6+ per pending work of linimon and myself.

Approved by:	maintainer

 

06:44 miwi 

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)

05:26 dinoex 

- update png to 1.5.10

16:30 scheidell 

PR:     162340
Submitted by:   gelraen.ua@gmail.com
Approved by:    gabor (mentor)
Feature safe:   yes
On some machines resulting binaries contains "/usr/lib" before
"/usr/local/lib/gcc45" in rpath and user gets something like
this if tries to launch that binary:

/libexec/ld-elf.so.1: /usr/lib/libstdc++.so.6: version GLIBCXX_3.4.10 required
by /usr/local/bin/eiskaltdcpp-gtk not found

Attached patch adds BUILD_DEPENDS on devel/chrpath, which is used to overwrite
rpath in built binaries (-DCMAKE_INSTALL_RPATH
only aappends directories to rpath)

22:21 pawel 

Update to version 2.2.4

Changelog: https://github.com/negativ/eiskaltdcpp/blob/master/ChangeLog.txt

PR:             ports/161898
Submitted by:   Maxim Ignatenko <gelraen.ua@gmail.com> (maintainer)

22:59 pawel 

- Update to version 2.2.1
- Add LICENSE

PR:             ports/155447
Submitted by:   Maxim Ignatenko <gelraen.ua@gmail.com> (maintainer)
Approved by:    miwi, wen (mentors implicit)

14:47 pav 

- Update to 2.1.1
- Split to separate ports of qt, gtk frontends, data and library

PR:             ports/152570
Submitted by:   Maxim Ignatenko <gelraen.ua@gmail.com> (maintainer)