14:59 Richard Gallamore (ultima) 

Seafile: Update to 11.0.2

Changes: https://manual.seafile.com/changelog/server-changelog/

    d5fa03f

19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

10:53 Muhammad Moinur Rahman (bofh) 

Mk/**ldap.mk: Convert USE_LDAP to USES=ldap

Convert the USE_LDAP=yes to USES=ldap and adds the following features:

- Adds the argument USES=ldap:server to add openldap2{4|5|6}-server as
  RUN_DEPENDS
- Adds the argument USES=ldap<version> and replaces WANT_OPENLDAP_VER
- Adds OPENLDAP versions in bsd.default-versions.mk
- Adds USE_OPENLDAP/WANT_OPENLDAP_VER in Mk/bsd.sanity.mk
- Changes consumers to use the features

Reviewed by:	delphij
Approved by:	portmgr
Differential Revision: https://reviews.freebsd.org/D38233

    6e1233b

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

17:02 Tobias C. Berner (tcberner) 

framework: switch tree to using vala.mk

PR:		249940

    d9b0d9a

11:39 Danilo G. Baio (dbaio) 

textproc/py-xmlschema: Update to 1.10.0

Changelog:	https://github.com/sissaschool/xmlschema/blob/v1.10.0/CHANGELOG.rst

Update consumers to use Python >= 3.7 (avoid break bulk -a).

    41745f9

01:32 Richard Gallamore (ultima) 

Seafile|Seahub: Updated to 9.0.2

Changes: https://manual.seafile.com/changelog/server-changelog/

    5b05cb7

09:50 Stefan Eßer (se) 

*/*: Remove redundant '-[0-9]*' from CONFLICTS

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".

Approved by:	portmgr (blanket)

    819f25b

02:49 Richard Gallamore (ultima) 

*: Updated to 8.0.7

Changes: https://manual.seafile.com/changelog/server-changelog/

    096767c

04:41 Xin LI (delphij) 

net/openldap24-client: bump all dependent port

In the earlier net/openldap24-server commit, only those which depend on
net/openldap24-sasl-client were bumped. Bumping all dependent port that
didn't get a bump to force a rebuild of these packages.

Suggested by:	kib

    3ba73da

01:12 Richard Gallamore (ultima) 

*: Updated to 8.0.6

Changes: https://manual.seafile.com/changelog/server-changelog/

    a1d5210

07:33 Richard Gallamore (ultima) 

net-mgmt/seafile-server: Update distfile hash

Upstream commit after tag... Just the usual.

    97eca83

00:53 Richard Gallamore (ultima) 

*: Updated to 8.0.5

Changes: https://manual.seafile.com/changelog/server-changelog/

    615910b

21:23 Richard Gallamore (ultima) 

net-mgmt/seafile-server: Added LDAP support option default on.

    2a4e9c2

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

02:26 ultima 

Updated Seafile/Seahub to 8.0.3

Changed to -server branch, some errors were creeping over
from the pro version not being compatible with the community
edition. Previously this was never an issue as you must manually
upgrade to the pro version for the new features.

Disabled seafile-controller config checking prior to startup.
The check only ran on ccnet previously and this was changed to
seafile which never implemented the function.
https://forum.seafile.com/t/seafile-controller-t-functionality-broken-on-8-x/13738

This version adds compatible with Django 2.2, this will require
coordination with multiple port devs to migrate this over
properly.

Changes: https://manual.seafile.com/changelog/server-changelog/

PR:		252715

 

00:16 ultima 

Added some environment variables that seafdav
requires if enabled.

Fixed dependency

 

12:18 ultima 

Updated seafile to 7.1.4 and seahub to 7.1.5

Changes:
https://download.seafile.com/published/seafile-manual/changelog/changelog-for-seafile-professional-server.md

 

08:30 ultima 

Fix python version hard coding in plists

 

00:28 ultima 

* Updated to 7.1.3

This minor version update no longer supports python 2.7.
The way mysql support is detected upstream has changed. Instead of patching
the configure.ac script, I used a couple hacks for this to be detected for
custom configurations. Didn't detect any issues with this method but I'm
open to change this in the future.

Added a SeaHub upgrade message to smooth out upgrading. For upgrading from
7.0.x,
if one does not clear the cache, http 500 will be returned.

The seafile_datadir no longer points to the seahub.ini, this has been changed
upstream and may cause upgrading issues if not using the default. This can
easily be changed by setting it in rc.conf.

Changes:
https://download.seafile.com/published/seafile-manual/changelog/changelog-for-seafile-professional-server.md

 

12:04 sunpoet 

Bump PORTREVISION for databases/libzdb shlib change

 

05:54 ultima 

Fix permissions on seafile-setup script

 

22:16 ultima 

Updated seafile to version 7.0.4 and seahub to 7.0.7

Changes: https://manual.seafile.com/changelog/server-changelog.html
https://manual.seafile.com/changelog/changelog-for-seafile-professional-server.html

 

13:30 jbeich 

devel/libevent2: update to 2.1.11

Changes:	https://github.com/libevent/libevent/releases/tag/release-2.1.11-stable
ABI:		https://abi-laboratory.pro/tracker/timeline/libevent/
PR:		239599
Reported by:	GitHub (watch releases)
Approved by:	zeising (maintainer)
MFH:		2019Q3 (maybe security, partially restores 2.1.8 ABI)
Differential Revision:	https://reviews.freebsd.org/D21133

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

01:25 ultima 

Updated seafile to 7.0.1
Updated seahub to 7.0.2

Changes: https://manual.seafile.com/changelog/server-changelog.html
https://manual.seafile.com/changelog/changelog-for-seafile-professional-server.html

 

14:42 sunpoet 

Update databases/libzdb to 3.2

- Update MASTER_SITES
- Update pkg-descr
- Update WWW
- Bump PORTREVISION of dependent ports for shlib change
- Take maintainership

Changes:	https://www.tildeslash.com/libzdb/#release_notes

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

13:32 rene 

Remove compatibility code for FreeBSD < 11.2 from all ports.

Simplify some ports where DragonFlyBSD no longer needs to be special-cased.
Submitted by:	rene
Reviewed by:	bapt, jbeich
Differential Revision:	https://reviews.freebsd.org/D17724

 

09:36 antoine 

Cleanup plists

 

08:14 linimon 

More precisely specify USES=compiler to fix build on gcc-based
platforms such as powerpc64.

Tested on powerpc64, amd64.

Approved by:	portmgr (tier-2 blanket)

 

19:57 ultima 

* Updated Seafile to 6.3.4, Updated Seahub to 6.3.5.
* Removed flup6, this was required with fastcgi which
Seahub no longer supports
* Added django-webpack-loader and requests_oauthlib,
these were missing depends added in 6.3.x which can
errors if missing when Seahub starts.
* Removed PYTHONPATH for python2.6 and added additional
directories for Seahub "thirdpart". This can also prevent
seahub from starting.

Changes: https://manual.seafile.com/changelog/server-changelog.html

 

03:06 ultima 

Removed fastcgi, this is no longer supported in seafile 6.3+
and previous installs 6.3+ prior to this revision are broken
when using the seahub_fastcgi option.

 

22:05 ultima 

Update Seafile family to 6.3.1

As of Seafile 6.3.0, django has been upgraded
to 1.11. Seafile's dependencies have also been
switched to match this change.

Reviewed by:	miwi
Differential Revision:	https://reviews.freebsd.org/D15718

 

21:35 ultima 

Move net-mgmt/seafile-server's message to seahub and
change it to clarify that Seahub is required for the
full application. This will prevent users from being
confused when installing net-mgmt/seafile-server.

PR:		227337

 

17:38 ultima 

* Update Seafile to 6.2.4
* Update Seahub to 6.2.5
* Reverted recent patches to work better with libevhtp

Affected ports: net-mgmt/ccnet-server net-mgmt/seafile-server www/py-seafdav
www/py-seafobj www/seahub

 

19:15 ultima 

* Revision bump for libevhtp
* Fix build warnings / errors for updated libevhtp

MFH:		2018Q1

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

19:49 ultima 

Updated to 6.1.2, cleanup makefiles, add note in UPDATING

Upstream has set collation type for MySQL to be implicit and
will cause issues when updating if tables are not set to
utf8_unicode_ci.

Approved by:	lifanov (mentor, implicit)

 

19:06 ultima 

* Updated maintainer email
* Changed comment headers to match my name and FreeBSD email

Reviewed by:	matthew (mentor)
Approved by:	matthew (mentor)
Differential Revision:	https://reviews.freebsd.org/D11466

 

15:09 lifanov 

update seafile to 6.0.10 and seahub to 6.0.13

This is an update to seafile to the most current version, 6.0.10. This update
moves duplicate code to Makefile.include and also added a variable seahub_ver
which is set to 6.0.13. The pkglist was also regenerated for most or all
packages.

* Updated seafile_ver to 6.0.10
* Added seahub_ver and set to 6.0.13
* Moved duplicate code to Makefile.include
* Regenerated pkg-lists

 - [fix] Fix a bug in listing libraries in admin panel
 - Improve performance when checking group shared library permission
 - [fix] Fix image popup in favourite page
 - [fix] Fix generating sharing link with expiring time in file detailed view
page
 - [fix] Don't allow to create library with '/' in name
 - [fix] Fix two-factor authentication
 - Add script to migrate between different storage backend

ports affected:
- net-mgmt/ccnet-server
- net-mgmt/seafile-server
- www/py-seafdav
- www/py-seafobj
- www/seahub

PR:		218932
Submitted by:	ultima1252@gmail.com (maintainer)

 

15:57 amdmi3 

- Always accompany OSVERSION check with OPSYS check

Approved by:	portmgr blanket

 

14:57 lifanov 

update net-mgmt/seafile-server to 6.0.9

Changelog: https://seacloud.cc/group/3/wiki/server-changelog

 - Show user' name instead of user's email in notifications sent out by email
 - Add config items for setting favicon, disable wiki feature
 - Add css id to easily hide user password reset and delete account button
 - [fix] Fix UI bug in restoring a file from snapshot
 - [fix] Fix after renaming a file, the old versions before file rename can't be
downloaded
 - [security] Fix XSS problem of the "go back" button in history page and
snapshot view page

* unify versioning of dependent ports:
  net-mgmt/seafile-server
  net-mgmt/ccnet-server
  www/py-seadav
  www/py-seaobj
  www/seahub
This replaces a rather ugly hack.

* add makesum-all target to ease maintenance
PR:		218245
Submitted by:	ultima1252@gmail.com (maintainer)

 

16:22 lifanov 

fixes for net-mgmt/seafile-server

Fix the setup scripts changing the generated configuration files to the correct
uid/gid. The directions were also fixed for how to start and setup
seafile/seahub correctly. This should fix any confusion when setting up seafile.

This also augments pkg-message with better directions for setup.

PR:		217873
Submitted by:	ultima1252@gmail.com (maintainer)

 

18:37 lifanov 

update net-mgmt/seafile-server to 6.0.8

 Changelog: https://seacloud.cc/group/3/wiki/server-changelog

PR:		217237
Submitted by:	ultima1252@gmail.com (maintainer)

 

02:57 jbeich 

devel/libevent2: drop historical suffix after r362796

PR:		216777
Approved by:	mm (maintainer)

 

07:56 jbeich 

devel/libevent2: update to 2.1.8 and cleanup

- DEFAULT_VERSIONS += ssl=openssl-devel is now supported
- devel/py-event and devel/p5-Event-Lib are marked BROKEN

Changes:	https://github.com/libevent/libevent/raw/release-2.1.8-stable/whatsnew-2.1.txt
Changes:	https://github.com/libevent/libevent/raw/release-2.1.8-stable/ChangeLog
PR:		216527
Exp-run by:	antoine
Approved by:	mm (maintainer)

 

03:23 lifanov 

net-mgmt/seafile-server - bugfixes

This is a bug fix release update. stat command call with incorrect options has
been fixed to work on *bsd. Readded the sqlite scripts to run seafile under
sqlite. Previously they were removed due to being broken, this was fixed
upstream.

* PORTREVISION bump
* Added sqlite scripts
* Fixed stat

PR:		216474
Submitted by:	ultima1252@gmail.com (maintainer)
Reviewed by:	matthew
Approved by:	matthew (mentor)
Differential Revision:	https://reviews.freebsd.org/D9350

 

12:54 lifanov 

* Updated to 6.0.7

 - Allow mysql root password to be empty.
 - No need to set ccnet peer name anymore.
 - Fixed a typo in upgrade scripts.
 - jpeg mime type
 - Add record to GarbageRepos when delete a broken repo
 - Get content-length from header when handling web upload.

PR:		215597
Submitted by:	Ultima1252@gmail.com (maintainer)
Reviewed by:	matthew
Approved by:	matthew (mentor)
Differential Revision:	https://reviews.freebsd.org/D8985

 

12:55 riggs 

Prepare split of net-mgmt/seafile in client / server ports; update to 6.0.6

PR:		215293
Submitted by:	Ultima1252@gmail.com (maintainer)