*: Move manpages to share/man

Approved by:	portmgr (blanket)

*/*: Bump jpeg-turbo users treewide

New major version 3.0.0

*/*: Fix build with llvm16 on 13.2-STABLE

As like as HEAD(14.0-RELEASE) llvm16 was merged in base for 13.2-STABLE
with the OSVERSION 1302507.

- Utilize USE_CXXSTD=c++14 or similar solution where applicable
- Update conditionals to addtionally check for OSVERSION greater than
  1302507 and less than 1400000

Approved by:	portmgr (blanket)
Sponsored by:	The FreeBSD Foundation

multimedia/mjpegtools: Fix build with llvm16

Approved by:	portmgr (blanket)
Sponsored by:	The FreeBSD Foundation

multimedia/mjpegtools: Remove (lib)QuickTime support

libquicktime is abandoned by upstream with last release over a
decade ago and doesn't compile with newer versions of FFmpeg

PR:		261302
Approved by:	portmgr (blanket, build fix)

accessibility/at-spi2-core: update to 2.46.0

What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
  interface.

What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
  events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).

What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

multimedia: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron LI <aly@aaronly.me>
  *  Alexander Botero-Lowry <alexbl@FreeBSD.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrew Thompson <andy@fud.org.nz>
  *  Andrew Thompson <thompsa@FreeBSD.org>
  *  Angel Carpintero <ack@telefonica.net>
  *  Anish Mistry (with help from mean)
  *  Anonymous <swell.k@gmail.com>

*/*: Remove redundant '-[0-9]*' from CONFLICTS

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".

Approved by:	portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

multimedia: Add missing USES={gl,gnome,sdl,xorg}

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

- Update sdl_gfx to 2.0.26, bump dependent ports due to shared library version
change

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Fix build on GCC-based architectures

PR:		231606
Submitted by:	pkubaj@anongoth.pl
MFH:		2018Q4

Bump PORTREVISION to chase update of multimedia/v4l_compat and libv4l

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

- Switch to options helpers

Approved by:	portmgr blanket

- Add LICENSE_FILE
- Switch to USES=localbase

Approved by:	portmgr blanket

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

Base GCC 4.2.1 on PowerPC fails with "internal compiler error: in do_SUBST,
at combine.c:502" error, thus request a modern compiler to fix the build.

Convert to USES=jpeg

- Drop @dirrm* from and add empty directories to pkg-plists

Approved by:	portmgr blanket

Allow building with libc++ r224926

PR:		ports/196629
Submitted by:	dim@

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Remove patches added together with USES=libtool that are no longer needed
after r362656.

Remove two libtool fixes from Mk/Uses/libtool.mk.  They don't always work
when an older version of a package is installed.  This is the case when an
executable links with installed libraries and with uninstalled libraries
that link with other uninstalled libraries.  For each of the directly
linked libraries the executable will have an rpath (/usr/local/lib for the
installed libraries and a path under WRKDIR for each of the uninstalled
libraries), but not for the indirect libraries.  Both ld(1) and rtld(1)
search the rpath of the executable first before any rpath of libraries, so
the indirectly linked libraries will be found in /usr/local/lib if they are
installed instead of in WRKDIR.

With this commit executables will overlink with uninstalled indirect
libraries again so their location is added to the rpath of the executable.

This partially reverts r358784.

PR:		191611
Approved by:	portmgr (bapt)

Fix two problems.

Use class instead of struct for RateCtl in encoderparams.hh. Class RateCtl is
  defined in ratectl.hh and used elsewhere in the code too.
Fix headerguard typo in ontheflyratectlpass[12].hh.

Found by:	Clang

Add missing libs when the QUICKTIME and DV options are enabled.

Reported by:	Ajtim <lumiwa@gmail.com>

Add 4 new sed commands to USES=libtool.  The first two apply some of the
changes that Debian made to their libtool.  The first command applies to
libtool versions 1.4 and up.  The second command is somewhat more elaborate
but essentially it uses the sed hold space to move an "elif...fi" block
down.  It applies to 2.x.  Together these reduce overlinking to unpatched
.la files (from ports that don't have USES=libtool yet but also .la files
in the work directory).

The third and fourth command fix relinking.  During staging libtool may
relink libA when it links to another library in the work directory libB.
The reason is that libA created during build phase has its runpath set to
the location of libB in the work directory.  This allows running an
executable that links to libA from within the work directory.  The relink
removes this extra runpath.

- Update graphics/sdl_gfx to version 2.0.25
- Bump PORTREVISION on ports depending on it, since the shlib version changed

Convert graphics/sdl_gfx to USES=libtool.  Also set USE_AUTOTOOLS because
upstream forgot to regenerate the build scripts.  This makes the build use
the correct version information and causes a library version bump.  Use
this opportunity to use USES=libtool instead of USES=libtool:oldver.
Bump PORTREVISION on all dependent ports and convert them to USES=libtool
where needed.  Also use USES=(gmake, pathfix, tar) and new LIB_DEPENDS
syntax here and there.

games/freedink-engine:
- Option helpers.
- Staging.
- Use dirrmtry for locale directories.

games/oolite:
- Staging.

- Update to 2.1.0

PR:		185934
Submitted by:	ports fury

Support stage

Add NO_STAGE all over the place in preparation for the staging support (cat:
multimedia)

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

Convert some multimedia@ ports to:
USES=pkgconfig and USES=pathfix

Use build-only dependency on pkgconf
Trim headers

- Fix build with GTK2 option
- Fix build with non-default compiler on i386
- Add MAKE_JOBS_SAFE

New file:
files/patch-y4mdenoise__MotionSercher.hh

Remove file:
files/patch-utils-Makefile.in

PR:             ports/169005
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- bin/png2yuv does not depend on gtk2 option

Reported by:    pointyhat

- Mark BROKEN when GTK2 option is enabled, because glav binary is not built
- Flip GTK2 option to default:off to enable package build with default options

Reported by:    pointyhat

Fix SDL check inside the GTK2 block. The port was marked IGNORE regardless of
the setting of SDL.

- fix build with png 1.5.10

- update png to 1.5.10

convert to new options framework

- Fix plist issue with QUICKTIME=true

PR:             ports/161871
Submitted by:   "Edward.Sanford.Sutton, III" <mirror176@cox.net>

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

Mark as broken on powerpc-9: gcc segfault.

Hat:            portmgr
Feature safe:   yes

- explicitly disable sdl when WITHOUT_SDL is used
- fix plist when WITHOUT_GTK2 is requested

Approved by:    multimedia (kwm)
Approved by:    sahil (mentor)

-resolve ICE on i386

PR:             ports/157885
Submitted by:   Jimmie James <jimmiejaz@gmail.com>
Approved by:    multimedia (kwm)
Approved by:    sahil (mentor)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Update graphics/sdl_gfx to version 2.0.22
- Update Mk/bsd.sdl.mk for the new shared lib version
- Bump portrevisions for all ports depending on graphics/sdl_gfx

- update mjpegtools to 2.0.0
- chase library bump

Sync to new bsd.autotools.mk

- Fix segmentation fault with jpeg

PR:             146308
Submitted by:   Ports Fury

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- Update to 1.9.0

PR:             143816
Submitted by:   Ports Fury

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with M

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- update to jpeg7
Tested by:      pav on pointyhat

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Remove USE_GETOPT_LONG which is a no-op since March 2007

- Chase devel/sdl12 shlib version bump

Update to 1.9.0rc3

PR:             ports/120265
Submitted by:   Yuri

Update to 1.9.0rc2

[patch] multimedia/mjpegtools - update to 1.9rc1

        The current mjpegtools (mpeg2enc for example) is dumping core way
        too often to be able to do useful media conversions.

        This version has been running on my system for two weeks now and
        it works much better.

portrevision bump for multimedia/lives multimedia/mjpegtools-yuvfilters
multimedia/y4mscaler since they have LIB_DEPENDS on this port. Other
ports having RUN_DEPENDS on this port are not bumped.

PR:             ports/113878
Submitted by:   Edwin Groothuis <edwin@mavetju.org>
Approved by:    Michael Johnson <ahze@ahze.net>

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Fix the build with GCC 4.1.

Reported by:    krismail

Install missing header

- Fix build after SDL update

Submitted by:           stas

 - Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
   structure (i.e. include/SDL for includes and sdl-config for configuration
   binary)
 - Update graphics/sdl_ttf to version 2.0.8
 - Update graphics/sdl_image to version 1.2.5
 - Update audio/sdl_mixer to version 1.2.7
 - Update net/sdl_net to version 1.2.6
 - Update Mk/bsd.sdl.mk accordingly
 - Fix dependent ports to fit the new directory structure and avoid several
   API breakages
 - Bump up portrevisions for all dependent ports to allow them to be upgraded
   by portupgrade/portmaster etc tools

Approved by:    kris (portmgr), sem (mentor)

- Remove file/patch-configure, already included in the tarball. Also, remove
  a few of out of date stuff in post-patch.
- Correct the USE_GETOPT_LONG, no need a check of FreeBSD version.
- Near all of knobs were not work, and option flags and dependenies were out
  of date.
        * Remove WITH_LIBMOVTAR, WITH_LIBDV_PAL, WITHOUT_AVIFILE and
          WITH_JPEGMMX.
        * Rename WITH_LIBDV -> WITH_DV (follow /usr/ports/KNOBS).
        * Now depend on GTK2, not GTK1, with an autocheck and a new
          WITH_GTK2 knob.
        * Add new knobs: WITHOUT_PNG, WITHOUT_X11 and WITH_GTK2
        * Make sure to not disable SDL if you want GTK2 otherwise it
          will not working.
        * All of knobs now work correct again with the update of
          option flags.
- Fix the plist when you use knobs.
- Bump the PORTREVISION.

Portlint:
        -Use -[0-9]* in CONFLICT.

- Transfer MAINTAINER to multimedia@

Approved by:    dhw (postmaster, for using multimedia@ as maintainer)
                gnome (gstreamer ports)

Remove unnecessary bash dependency.

Approved by:    ahze

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Fix build with new libquicktime

Submitted by:   ankon via irc.freenode.org/#FreeBSD-GNOME
Obtained from:  mjpeg cvs

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

- Add SHA256
- Add SIZE to a few ports

- Update to 1.8.0

- Add missing file to plist

Reported by:    kris mail

- Fix png12 support
- Fix mplex on 4.x

PR:             83689
Submitted by:   Sven Berkvens-Matthijsse  <sven@berkvens.net>

- Fix typo in plist

PR:             83596
Submitted by:   q@galgenberg.net

- Update to 1.6.3-rc1

- libdata/pkgconfig is now included in mtree

Approved by:    marcus (portmgr hat)

- Remove unneeded glib12 dependency

- Add a new knob, WITHOUT_AVIFILE, to disable multimedia/avifile support to
  hopefully fix build on !i386 !amd64. Avifile support is only enabled
  for i386 and amd64

- Add CONFLICTS= mplex-*

PR:             ports/76709
Submitted by:   Ulrich Spoerlein <q@uni.de>

Pass over maintainership to ahze: there goes my baby but to a well
caring step father; he has submitted the last 3 major fixes

- Fix build on amd64 [1]
- Switch to bash 3

PR:             ports/73746 [1]
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com>
Approved by:    maintainer timeout (4 months)

BROKEN on amd64: Does not compile on amd64 (needs -fPIC)