*/*: Remove GNU_CONFIGURE_MANPREFIX

After 9fd7ee1cdf6c remove GNU_CONFIGURE_MANPREFIX from my ports.

*/*: Simply future removal of GNU_CONFIGURE_MANPREFIX

Simplify the future removal of GNU_CONFIGURE_MANPREFIX after the
manprefix migration is complete. The current placement of
GNU_CONFIGURE_MANPREFIX will not result in consecutive blank lines or
comments when lines containing GNU_CONFIGURE_MANPREFIX are removed in
batches.

Notified by:	mat

misc/talkfilters: Move manpages to share/man

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

misc: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adam@vectors.cx>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan E <alane@FreeBSD.org>
  *  Alex Semenyaka <alex@rinet.ru>
  *  Alex Stangl <alex@stangl.us>
  *  Alexander Logvinov <avl@FreeBSD.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Nusov <alexander.nusov@nfvexpress.com>
  *  Alexander Timoshenko <gonzo@univ.kiev.ua>

*/*: Remove redundant '-*' from CONFLICTS definitions

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Approved by: portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

onvert to UCL & cleanup pkg-message (categories l-m)

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Lift BROKEN_aarch64 for Clang 3.8 per FreeBSD 11.0 EOL

The cryptic "error in backend" is emitted by Clang on crash.

Mark a few leaf ports broken on aarch64.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

Remove -fPIC.  Clang crashes for some reason but this has nothing to do
with -fPIC.

Add -fPIC to various ports to enable them to build on armv6.

Approved by:	portmgr (tier-2 blanket)

Use USES=pathfix where applicable.

PR:		213195
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D8093

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

Move MASTER_SITES from CRITICAL to LOCAL/ehaupt

- Switch to USES=libtool, drop .la files

Approved by:	portmgr blanket

- Use pkg-message instead of pre-everything echos
- Strip shared object

Fix package list.

Support staging.

Add NO_STAGE all over the place in preparation for the staging support (cat:
misc)

Remove MAKE_JOBS_SAFE which is now default.

- Convert USE_GMAKE to USES=gmake
- Change pkgconfig:build to pkgconfig since it's the same and it's bad practice.
  It accidentally slipped in during the original introduction
- Trim header

Pacify portlint

Feature safe:   yes

Add LICENSE and remove MD5 sums.

Feature safe:   yes

Mark MAKE_JOBS_SAFE

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

Use MASTER_SITE_CRITICAL

Update to 2.3.8

Update to 2.3.7

Update to 2.3.6

- s|ehaput|ehaupt|
- s|INSTALLS_SHLIB|USE_LDCONFIG|
- add two mirrors
- update pkg-plist, tarball was rerolled [1] without bumping the version
- reformat pkg-descr (fmt -w 80)
- bump portrevision

[1]
Changes:
- added support for pkg-config
- funetak.l - replaced random() with gtf_random(); eliminates build error in
  mingw
- "auto-files" are generated with automake 1.9.6 instead of automake 1.9.5

Transfer maintainership to ehaupt.

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Update to 2.3.5.

Thanks to:      edwin's version check script

- Add SHA256

Requested by:   adamw (maintainer)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

This is a pretty questionable commit.

* MASTER_SITE and WWW have moved; update them. Going to the old URL simply
  redirects you to the new site.

* Distfile was re-rolled with extensive changes. All the autotools stuff
  was regenerated using a newer autoconf/automake ver. Additionally, the
  code for the "dubya" filter was modified to include an Irix-oritented
  fix, its manpage was changed, and the talkfilters info page was updated.

* Author apparently did not feel that these changes warranted a new release
  number *glares at author*

I don't like how much was changed in a re-rolled tarball, but there you are.

- Register conflicts

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Re-work the pkg-descr: fix up the WWW line and add a new
filter (pirate) to the list. And make it look better.

Also, warn people that these things can get pretty
offensive. The warning was taken verbatim from the WWW site.

                        -or-

Re-work Ted Kennedy pkg-descr: fix up Ted Kennedy WWW line
and add a postmodern filter (pirate) to Ted Kennedy list.
And make the semiotic object look better.

Also, warn people that deconstructed these things can acquire
intersubjectivity pretty offensiveness. Ted Kennedy's warning
was semiotically taken verbatim from the Ted Kennedy WWW site.

Update to 2.3.4.

Update to 2.3.3.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Update to 2.3.2.

Add size data, approved by maintainers.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Update to 2.3.1.

Update to 2.2.

Also, given how inane this program is, set myself as MAINTAINER.

- Update to version 2.1

PR:             57095
Submitted by:   Ports Fury

Add talkfilters.

From the website:

The GNU Talk Filters are filter programs that convert ordinary English text
into text that mimics a stereotyped or otherwise humorous dialect. These
filters have been in the public domain for many years, but now for the first
time they are provided as a single integrated package. The filters include
b1ff, brooklyn, chef, cockney, drawl, fudd, funetak, jethro, jive, kraut,
pansy, postmodern, redneck, valspeak, and warez. Each program reads from
standard input and writes to standard output. This version of the package also
provides the filters as a C library, so they can be easily embedded in other
programs.