06:58 Wen Heping (wen) 

math/py-networkx: Update to 3.3

    2968257

09:33 Wen Heping (wen) 

math/py-networkx: Update to 3.2

    9bccc8a

19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

09:09 Gerald Pfeifer (gerald) 

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

    8d3e020

23:52 Wen Heping (wen) 

math/py-networkx: Update to 3.1

    2f9d218

13:46 Wen Heping (wen) 

math/py-networkx: Update to 3.0

    57e2ed0

15:58 Dmitry Marakasov (amdmi3) 

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

    77d6847

22:29 Wen Heping (wen) 

math/py-networkx: Update to 2.8.8

    81a9741

23:15 Wen Heping (wen) 

math/py-networkx: Update to 2.8.6

Update DEPENDS
Remove CONFLICTS
Take maintainership
PR:		266704
Reported by:	wen@
Approved by:	maintainer(timeout, >= 30days)

    dd7da5b

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

math: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Alessando Sagratini <ale_sagra@hotmail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Amarendra Godbole <amarendra.godbole@gmail.com>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Fehlner (fehlner@gmx.de)
  *  Andrew L. Neporada <andrew@chg.ru>
  *  Andrey <gugu@zoo.rambler.ru>
  *  Andrey Zakhvatov
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@plab.ku.dk>
  *  Anton Berezin <tobez@tobez.org>
  *  Anton Shterenlikht
  *  Anton Shterenlikht <mexas@bris.ac.uk>
  *  Bob Eager <bob@eager.cx>
  *  Charlie Kester <corky1951@comcast.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Cheng-Lung Sung <clsung@dragon2.net>
  *  Chris D. Faulhaber <jedgar@fxp.org>
  *  Christopher J. Ruwe
  *  Christopher Key <cjk32@cam.ac.uk>
  *  Chuck Hein <geekdude@pacbell.net>
  *  Cyrille Szymanski <cnszym@gmail.com>
  *  Dan Rue <drue@therub.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  David Naylor <dbn@FreeBSD.org>
  *  David Naylor <naylor.b.david@gmail.com>
  *  Dereckson <dereckson@gmail.com>
  *  Devin Teske <dteske@FreeBSD.org>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Dmitry Sivachenko <mitya@yandex-team.ru>
  *  Don Croyle <croyle@gelemna.org>
  *  Douglas K. Rand (rand@meridian-enviro.com)
  *  Dylan Simon <dylan@dylex.net>
  *  Edwin Groothuis <edwin@mavetju.org>
  *  Eijiro Shibusawa <ej-sib@ice.uec.ac.jp>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Eoin Lawless (eoin@maths.tcd.ie)
  *  Eric A. Griff <eagriff@global2000.net>
  *  Eric van Gyzen <vangyzen@stat.duke.edu>
  *  Ewgenij Gawrilow <gawrilow@math.tu-berlin.de>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Foxfair Hu <foxfair@FreeBSD.org>
  *  Frederic Han <han@math.jussieu.fr>
  *  Gabor Kovesdan <gabor@FreeBSD.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Giuseppe Pilichi aka Jacula Modyun <jacula@gmail.com>
  *  Greg Larkin <glarkin@FreeBSD.org>
  *  Guangyuan Yang <ygy@FreeBSD.org>
  *  Gustau Perez i Querol <gustau.perez@gmail.com>
  *  Heinz Tschabitscher
  *  Horia Racoviceanu <horia@racoviceanu.com>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Iblis Lin <iblis@hs.ntnu.edu.tw>
  *  Issei Suzuki <issei@jp.FreeBSD.ORG>
  *  Janni
  *  Jason Harris <jharris@widomaker.com>
  *  Javad Kouhi <javad.kouhi@gmail.com>
  *  Jean-Yves Lefort <jylefort@FreeBSD.org>
  *  Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johannes Dieterich <dieterich@ogolem.org>
  *  Johannes M Dieterich <jmd@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  John Marino <marino@FreeBSD.org>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Ju Pengfei <ju.pengfei@gmail.com>
  *  Jukka A. Ukkonen <jau@iki.fi>
  *  Kay Lehmann <kay_lehmann@web.de>
  *  Kevin Lo <kevlo@FreeBSD.org>
  *  Klaus T. Aehlig <aehlig@linta.de>
  *  Kubilay Kocak <koobs@FreeBSD.org>
  *  Kurt Jaeger <fbsd-ports@opsec.eu>
  *  Lars Engels <lme@FreeBSD.org>
  *  Lars Koeller <Lars.Koeller@Uni-Bielefeld.DE>
  *  Lars Koeller <Lars.Koeller@Uni-Bielefeld.de>
  *  Li-Wen Hsu <lwhsu@FreeBSD.org>
  *  Li-Wen Hsu <lwhsu@lwhsu.org>
  *  M. L. Dodson, <bdodson@scms.utmb.edu>
  *  Maho Nakata <maho@FreeBSD.org>
  *  Mario S F Ferreira <lioux@FreeBSD.org>
  *  Mario S F Ferreira <lioux@linf.unb.br> et al.
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Mark R V Murray <markm@FreeBSD.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Matthew Seaman <matthew@FreeBSD.org>
  *  Maurice Castro <maurice@serc.rmit.edu.au>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Maxime Henrion <mux@FreeBSD.org>
  *  Michael Haro <mharo@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Johnson <ahze@ahze.net>
  *  Michael Neumann <mneumann@ntecs.de>
  *  Muhammad Moinur Rahmanh <5u623l20@gmail.com>
  *  NAKATA Maho <chat95@mbox.kyoto-inet.or.jp>
  *  NAKATA, Maho <maho@FreeBSD.org>
  *  Nakata Maho <maho@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Olivier Duchateau
  *  Pedro F. Giffuni
  *  Pedro F. Giffuni <giffunip@asme.org>
  *  Pedro Giffuni
  *  Pedro Giffuni <giffunip@asme.org>
  *  Pedro Giffuni <pfg@FreeBSD.org>
  *  Peter Pentchev <roam@FreeBSD.org>
  *  Philip Paeps <philip@FreeBSD.org>
  *  Pierre-Paul Lavoie <ppl@nbnet.nb.ca>
  *  Pietro Cerutti <gahr@FreeBSD.org>
  *  Piotr Rybicki <meritus@innervision.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Rainer Hurling <rhurlin@gwdg.de>
  *  Robert Jenssen
  *  Robin Schilham
  *  Rod Taylor <ports@rbt.ca>
  *  Roman Neuhauser <neuhauser@sigpipe.cz>
  *  Sander Vesik <sander@haldjas.folklore.ee>
  *  Scott Flatman <sf@dsinw.com>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Akifyev <asa@agava.com>
  *  Sergey Akifyev <asa@gascom.ru>
  *  Sergey Skvortsov <skv@FreeBSD.org>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Shell Hung <shell@shellhung.org>
  *  Shin-ya MURAKAMI <murashin@gfd-dennou.org>
  *  Stas Timokhin <devel@stasyan.com>
  *  Stefan A. Deutscher (sad@mailaps.org)
  *  Stefan Esser <se@StefanEsser.FreeBSD.org>
  *  Stephen Montgomery-Smith <stephen@FreeBSD.edu>
  *  Stephen Montgomery-Smith <stephen@FreeBSD.org>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Stephen Montgomery-Smith <stephen@missouri.edu>
  *  Steve Wills <steve@mouf.net>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@f2o.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas (<thierry@pompo.net>)
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Thomas Sandford <freebsduser@paradisegreen.co.uk>
  *  Timothy Bourke <timbob@bigpond.com>
  *  Tony Maher
  *  Tz-Huan Huang <tzhuan@csie.org>
  *  Vsevolod Stakhov <vsevolod@FreeBSD.org>
  *  Vsevolod Stakhov <vsevolod@highsecure.ru>
  *  Waitman Gobble <waitman@waitman.net>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Will Andrews <andrews@technologist.com>
  *  Yi-Hsuan Hsin <mhsin@mhsin.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yinghong.Liu <relaxbsd@gmail.com>
  *  Yoshiaki UCHIKAWA <yoshiaki@kt.rim.or.jp>
  *  Yukihiro Nakai <Nakai@technologist.com>
  *  Yuri Victorovich <yuri@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Yuri Victorovich <yuri@tsoft.com>
  *  Zhen REN <bg1tpt@gmail.com>
  *  amir.husaini@gmail.com
  *  arved
  *  asami
  *  b.f. <bf@FreeBSD.org>
  *  bart <lbartoletti@FreeBSD.org>
  *  bauerm
  *  bf <bf2006a@yahoo.com>
  *  bf <bf@FreeBSD.org>
  *  bf@FreeBSD.org
  *  bremner@unb.ca
  *  chinsan
  *  chuckr@FreeBSD.org
  *  dawe <daweonline@gmail.com>
  *  dbader@ece.unm.edu
  *  dd
  *  demon@FreeBSD.org
  *  dikshie
  *  eserte
  *  fenner
  *  gahr
  *  giffunip
  *  gmarco@giovannelli.it
  *  gurkan@phys.ethz.ch
  *  ijliao
  *  janek@gaja.ipan.lublin.pl
  *  jhs@berklix.com / asami (original)
  *  jmz
  *  js@jeannot.org
  *  keith@FreeBSD.org
  *  ljo
  *  mr
  *  nobu@rd.isac.co.jp
  *  pauls@utdallas.edu
  *  pusto@web.de
  *  reg@shale.csir.co.za
  *  rfarmer@predatorlabs.net
  *  stephen@FreeBSD.org
  *  thierry@pompo.net
  *  tobez
  *  will
  * # Created by Matthias Fechner <mfechner@FreeBSD.org>

With hat:	portmgr

    f53eb28

23:24 Wen Heping (wen) 

math/py-networkx: Update to 2.6.3

PR:		258652
Reported by:	wen@
Approved by:	maintainer(timeout, > 14 days)

    dec1706

19:47 Bernhard Froehlich (decke) 

math/py-networkx: Add CPE information

Approved by:	portmgr (blanket)

    ac9d351

20:13 Thierry Thomas (thierry) 

math/py-matplotlib: chase minimum Python version in dependent ports

Since the previous update changed USES=python from 3.6+ to 3.7+, all
dependent ports must have USES=python:3.7+ as well, otherwise it breaks
the @py36 flavor.

PR:		255347
Reported by:	sunpoet

    1d44af5

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

09:09 thierry 

Upgrade to 2.5.

Release notes at
<https://networkx.org/documentation/stable/release/release_2.5.html>.

PR:		253540
Submitted by:	/me
Approved by:	dikshie (maintainer)

 

21:25 rene 

Simplify some ports using PYTHON_MAJOR_VER and Python 3.6+

 

14:15 antoine 

Unbreak bulk -a

 

23:51 dbaio 

Update Sphinx

- Repocopy textproc/py-sphinx to textproc/py-sphinx18

  Update it to 1.8.5 (latest version from 1.8.X).
  This version supports Python 2 and 3.
  Add test target.

- textproc/py-sphinx: Update to 3.0.2

  Python 3 only (3.5+).
  Add test target.

- Mk/Uses/python.mk: Add PY_SPHINX

  Shared macro to use with flavors and not break
  ports with USES=python (all versions).

  Python >=3.5  --> textproc/py-sphinx (v3.0.2)
  Python < 3.5  --> textproc/py-sphinx18 (v1.8.5)

  All ports that uses sphinx were changed to use the new variable
  ${PY_SPHINX} in the dependency line, exceptions:

    * Ports that fails to build with sphinx 3.0.2 because of code.
      They are pointing to textproc/py-sphinx18 directly.
      There aren't many ports.

    * Ports that doesn't know Python flavors.

- Add several patches to fix Sphinx consumers

  The most common issues are related with pkg-plist, the output
  files from Sphinx changes between versions, keep this dynamically
  is the better approach.

  This will save time in future sphinx updates.

PR:		245629
Exp-run by:	antoine

 

05:32 antoine 

Revert r515077 and unbreak bulk -a

Reported by:	pkg-fallout
Pointy hat:	yuri

 

01:05 yuri 

math/py-networkx: Update 2.1 -> 2.4

PR:		241352
Approved by:	dikshie@sfc.wide.ad.jp (maintainer)

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

17:36 miwi 

- Copy math/py-networkx to math/py-networkx1 and applies modifications to
  backport it to the latest version of the 1.x branch -> 1.11
- Adds CONFLICTS_INSTALL to math/py-networkx (no bump of PORTVERSION) and
math/py-networkx1
- math/py-networkx1 is required by the package devel/py-taskflow that is not
compatible with math/py-network

PR:		232240
Submitted by:	freebsd_ports@k-worx.org
Sponsored by:	iXsystems Inc.

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

07:39 yuri 

math/py-networkx: Update 1.10 -> 2.1

PR:		229815
Reported by:	jwb
Approved by:	dikshie@sfc.wide.ad.jp (maintainer)

 

17:05 mat 

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

 

17:46 gerald 

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

 

21:30 yuri 

math/py-networkx: Remove python 2.7 version restriction

py36 works now.

PR:		225777
Submitted by:	John W. O'Brien <john@saltant.com>
Approved by:	tcberner (mentor, implicit)

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

12:34 miwi 

- Fix shebangs

Submitted by:	Jochen Neumeister

 

17:13 jbeich 

math/py-numpy: track PORTEPOCH in consumers

 

19:42 amdmi3 

- Change condition to fix build with fmake when using python3.x

PR:		209514
Approved by:	portmgr blanket

 

14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

09:44 koobs 

graphics/py-graphviz: Move to py-pygraphviz, Fix 3.x build

There are numerous graphviz related packages in PyPI, including:
graphviz, graphviz-python and pygraphviz.

This port, py-graphviz, is not and does not provide the same package
as the 'graphviz' package on PyPI (CHEESESHOP).

Further, it blocks the creation of a correctly named py-graphviz port,
is a POLA violation in terms of users expecting to find and recieve
the package they expect based on a standard search, and is likely to
create confusion among other ports if they depend on a python graphviz
package, which could result in incorrect packages/dependencies.

This is why among other reasons, Python packages should be named
exactly what they are called in PyPI, or inside install_requires,
setup_requires or tests_requires as dependencies in other packages.

This change moves py-graphviz to py-pygraphviz to correct the above
incorrect naming.

While I'm here:

- Remove backup (http) MASTER_SITES, CHEESESHOP is highly-available
  and provides a Geo-aware CDN by Fastly.
- Remove {BUILD,RUN}_DEPENDS in favour of the actual LIB_DEPENDS
- Use PYDISTUTILS_* framework variables to customise the build instead
  of hack patching setup.py
- Enable autoplist, fixing builds on Python 3.x [1]
- Enable concurrent (Python version) installation
  - Hack patch setup.py to preclude docs installation, as it adds a
    directory to --record and breaks pkg-plist output [2]
- Remove DOCSDIR override (no longer necessary)
- Assign MAINTAINER'ship to python@
- Add TEST_DEPENDS and test target
- pkg-descr: Match WWW URL to setup.py:homepage field
- pkg-descr: Improve package description text (matching upstream)

While I'm sweeping dependencies:

- Fix a typo in science/gramps: s|>-|>=

[2] https://wiki.freebsd.org/Python (Open task for install_data bug)

Reported by:	Ben Woods (via IRC) [1]

 

08:42 rm 

math/py-networkx: let it build with python3

Drop the python version limit, by asking user to uncheck some options,
that will not work with python3 for now.

PR:		204594
Submitted by:	John W. O'Brien <john@saltant.com>
Approved by:	dikshie@sfc.wide.ad.jp (maintainer)

 

18:36 rm 

math/py-networkx: update to 1.10

- update to 1.10
- add YAML option (on by default)
- remove gratuitous word from option descriptions
- USE_PYTHON=concurrent instead of setting EXAMPLESDIR
- alphabetize USE_PYTHON
- discard pkg-message given all options are enabled by default

While here limit python version to 2.x, because it's dependencies
graphics/py-graphviz and math/py-matplotlib failed to configure
with python3.

PR:		204594
Submitted by:	John W. O'Brien <john@saltant.com>
Approved by:	dikshie@sfc.wide.ad.jp (maintainer)

 

10:44 riggs 

Allow for many run dependencies to be OPTIONs,
as by upstream suggestion

PR:		201349
Submitted by:	john@saltant.com
Approved by:	maintainer timeout

 

15:40 wen 

- Update to 1.9.1

PR:		200679
Submitted by:	yuri@rawbw.com
Approved by:	maintainer

 

00:15 amdmi3 

- Don't cat pkg-message from Makefiles

Approved by:	portmgr blanket

 

16:54 mva 

- Convert ports of math/ to new USES=python

Approved by:	portmgr (implicit)

 

19:41 swills 

- Switch from easy_install to USE_PYDISTUTILS=yes
- Add EXAMPLES OPTION
- Use shebangfix

PR:		ports/187882
Submitted by:	Johannes Jost Meixner <xmj@chaot.net>
Approved by:	dikshie <dikshie@sfc.wide.ad.jp> (maintainer)

 

15:09 demon 

Fix plist when port is used with python-3.

Approved by:	maintainer

 

20:55 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
math)

 

12:33 demon 

Update to version 1.8.1.

Approved by:	maintainer

 

14:52 wen 

- Update to 1.7

PR:		178972
Submitted by:	dikshie <dikshie@sfc.wide.ad.jp> (maintainer)

 

20:05 pav 

- Kill examples handling in setup.py, since they are installed manually by port

Reported by:    pointyhat

14:12 demon 

Update to version 1.6.
Use setup-tools.

Reviewed by:    maintainer

19:05 lwhsu 

- Update to 1.5 [1]
- Remove unneeded patch
- Respect DOCSDIR
- This port does not support NOPORTDOCS (yet)

PR:             ports/159140 [1]
Submitted by:   dikshie <dikshie@sfc.wide.ad.jp> (maintainer)

06:23 miwi 

- Update to 1.4

PR:             154301
Submitted by:   dikshie <dikshie@sfc.wide.ad.jp> (maintainer)
Feature safe:   yes

02:59 wen 

- Update to 1.3

PR:             ports/153554
Submitted by:   dikshie <dikshie@sfc.wide.ad.jp> (maintainer)

17:16 lwhsu 

- Update to 1.2

PR:             ports/149282
Submitted by:   dikshie <dikshie AT sfc.wide.ad.jp> (maintainer)

05:59 wen 

- Update to 1.0.1 and fix the fetch error

Submitted by:   dikshie@sfc.wide.ad.jp (maintainer,via Email)

04:15 wen 

- Update to 1.0

PR:             ports/142512
Submitted by:   Wen Heping <myself>
Approved by:    maintainer

16:26 miwi 

- Update to 0.99

PR:             128991
Submitted by:   Wen Heping <wenheping@gmail.com>
Approved by:    maintainer

21:16 lwhsu 

Add py-networkx 0.36, tools for complex network.

PR:             ports/124620
Submitted by:   dikshie <dikshie AT sfc.wide.ad.jp>