23:28 Stephen Montgomery-Smith (stephen) 

math/octave: Update to 9.1.0.

math/octave-forge: Bump portrevision.
Mark broken and set optional dependency to off in math/octave-forge:

math/octave-forge-bioinfo
math/octave-forge-coder
math/octave-forge-financial
math/octave-forge-fits
math/octave-forge-fuzzy-logic-toolkit
math/octave-forge-gnuplot
math/octave-forge-informationtheory
math/octave-forge-irsa
math/octave-forge-level-set
math/octave-forge-nnet
math/octave-forge-plot
math/octave-forge-queueing
math/octave-forge-symband

    c92f309

03:47 Muhammad Moinur Rahman (bofh) 

math/octave: Moved man to share/man

Approved by:    portmgr (blanket)

    6a2dabc

03:47 Muhammad Moinur Rahman (bofh) 

benchmarks/autobench: Moved man to share/man

Approved by:    portmgr (blanket)

    a7ab8d7

12:02 Thierry Thomas (thierry) 

*/*: bump PORTREVISION after the upgrade to SuiteSparse

    68a7254

10:19 Thierry Thomas (thierry) 

*/*: bump PORTREVISION after the upgrade of SuiteSparse to v7.5.0

    0f35d11

21:20 Stephen Montgomery-Smith (stephen) 

math/octave: FIX PLIST WITH QT5=OFF

Bump portrevision.

PR:		276060
Reported by:	tcberner@

    3dea3d8

14:31 Thierry Thomas (thierry) 

*/*: chase the upgrade of SuiteSparse

    41c2a6b

19:03 Thierry Thomas (thierry) 

*/*: bump PORTREVISION after the upgrade of OpenBLAS

PR:		273219

    ab17137

02:27 Stephen Montgomery-Smith (stephen) 

math/octave: Update to 8.4.0.

    13617ed

14:07 Thierry Thomas (thierry) 

*/*: bump portrevision to chase CHOLMOD’s upgrade

    0ff923b

10:13 Thierry Thomas (thierry) 

*/*: chase the upgrade of CHOLMOD

    f2d3e2a

09:03 Thierry Thomas (thierry) 

*/*: chase the upgrade of SuiteSparse

    c32596f

17:57 Thierry Thomas (thierry) 

/*: bump PORTREVISION after the upgrade of SuiteSparse

    a0ed0dc

03:37 Stephen Montgomery-Smith (stephen) 

math/octave: Update to 8.3.0.

    2717f14

16:11 Thierry Thomas (thierry) 

*/*: bump PORTREVISION after the upgrade of SuiteSparse

    823182b

09:09 Gerald Pfeifer (gerald) 

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

    8d3e020

02:17 Stephen Montgomery-Smith (stephen) 

math/octave: Update to 8.1.0.

Bump portrevision of all dependent ports.

Mark broken math/octave-forge-database, math/octave-forge-mechanics,
math/octave-forge-mpi math/octave-forge-nlwing2,
math/octave-forge-parallel, math/octave-forge-specfun

Set to default off these ports in math/octave-forge.

Clean up indentation in Mk/Uses/octave.mk.

    d4f3d79

16:45 Thierry Thomas (thierry) 

math/suitesparse*: bump PORTREVISION of dependant ports

    112013a

17:54 Muhammad Moinur Rahman (bofh) 

Mk/**octave.mk: Convert to USES=octave

As part of the improvements of USES infrastructure Mk/bsd.octave.mk has
been converted to Mk/Uses/octave.mk. This also declutters some old
stuffs in the octave-* ports and makes it simpler to add more
octave-forge ports easily.

While I am here make all the ports portclippy/portfmt compliant. And use
USES macros whenever possible.

Reviewed by:	portmgr
Approved by:	tcberner
Differential Revision:	https://reviews.freebsd.org/D37887

    8231864

14:44 Muhammad Moinur Rahman (bofh) 

Mk/**tex.mk: Convert bsd.tex.mk to USES=tex

- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
  and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
  infrastructure and also in the ports which have been removed from the
  ports as those are redundant.

In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.

Reviewed by:	portmgr
Approved by:	portmgr (blanket)

    721e577

11:09 Thierry Thomas (thierry) 

*/*: bump PORTREVISION after the upgrade of math/suitesparse*

PR:		267742

    6f9769f

19:21 Stephen Montgomery-Smith (stephen) 

math/octave: Update to 7.3.0.

    2815b6d

10:20 Felix Palmen (zirias) 

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

    ddae4e9

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

20:57 Stephen Montgomery-Smith (stephen) 

math/octave: Update to 7.2.0.

    03c8f44

14:35 Tobias C. Berner (tcberner) 

science/hdf5: bump PORTREVISION of consumers

The SO-version increased in the update to 1.12.2 in
a43418b81530f7e897abfbe18dd59f44265a1a0f .

Reported by:	VVD <vvd@unislabs.com>

    5564b3b

14:22 Tobias C. Berner (tcberner) 

math: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Alessando Sagratini <ale_sagra@hotmail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Amarendra Godbole <amarendra.godbole@gmail.com>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Fehlner (fehlner@gmx.de)
  *  Andrew L. Neporada <andrew@chg.ru>
  *  Andrey <gugu@zoo.rambler.ru>
  *  Andrey Zakhvatov
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@plab.ku.dk>
  *  Anton Berezin <tobez@tobez.org>
  *  Anton Shterenlikht
  *  Anton Shterenlikht <mexas@bris.ac.uk>
  *  Bob Eager <bob@eager.cx>
  *  Charlie Kester <corky1951@comcast.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Cheng-Lung Sung <clsung@dragon2.net>
  *  Chris D. Faulhaber <jedgar@fxp.org>
  *  Christopher J. Ruwe
  *  Christopher Key <cjk32@cam.ac.uk>
  *  Chuck Hein <geekdude@pacbell.net>
  *  Cyrille Szymanski <cnszym@gmail.com>
  *  Dan Rue <drue@therub.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  David Naylor <dbn@FreeBSD.org>
  *  David Naylor <naylor.b.david@gmail.com>
  *  Dereckson <dereckson@gmail.com>
  *  Devin Teske <dteske@FreeBSD.org>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Dmitry Sivachenko <mitya@yandex-team.ru>
  *  Don Croyle <croyle@gelemna.org>
  *  Douglas K. Rand (rand@meridian-enviro.com)
  *  Dylan Simon <dylan@dylex.net>
  *  Edwin Groothuis <edwin@mavetju.org>
  *  Eijiro Shibusawa <ej-sib@ice.uec.ac.jp>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Eoin Lawless (eoin@maths.tcd.ie)
  *  Eric A. Griff <eagriff@global2000.net>
  *  Eric van Gyzen <vangyzen@stat.duke.edu>
  *  Ewgenij Gawrilow <gawrilow@math.tu-berlin.de>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Foxfair Hu <foxfair@FreeBSD.org>
  *  Frederic Han <han@math.jussieu.fr>
  *  Gabor Kovesdan <gabor@FreeBSD.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Giuseppe Pilichi aka Jacula Modyun <jacula@gmail.com>
  *  Greg Larkin <glarkin@FreeBSD.org>
  *  Guangyuan Yang <ygy@FreeBSD.org>
  *  Gustau Perez i Querol <gustau.perez@gmail.com>
  *  Heinz Tschabitscher
  *  Horia Racoviceanu <horia@racoviceanu.com>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Iblis Lin <iblis@hs.ntnu.edu.tw>
  *  Issei Suzuki <issei@jp.FreeBSD.ORG>
  *  Janni
  *  Jason Harris <jharris@widomaker.com>
  *  Javad Kouhi <javad.kouhi@gmail.com>
  *  Jean-Yves Lefort <jylefort@FreeBSD.org>
  *  Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johannes Dieterich <dieterich@ogolem.org>
  *  Johannes M Dieterich <jmd@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  John Marino <marino@FreeBSD.org>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Ju Pengfei <ju.pengfei@gmail.com>
  *  Jukka A. Ukkonen <jau@iki.fi>
  *  Kay Lehmann <kay_lehmann@web.de>
  *  Kevin Lo <kevlo@FreeBSD.org>
  *  Klaus T. Aehlig <aehlig@linta.de>
  *  Kubilay Kocak <koobs@FreeBSD.org>
  *  Kurt Jaeger <fbsd-ports@opsec.eu>
  *  Lars Engels <lme@FreeBSD.org>
  *  Lars Koeller <Lars.Koeller@Uni-Bielefeld.DE>
  *  Lars Koeller <Lars.Koeller@Uni-Bielefeld.de>
  *  Li-Wen Hsu <lwhsu@FreeBSD.org>
  *  Li-Wen Hsu <lwhsu@lwhsu.org>
  *  M. L. Dodson, <bdodson@scms.utmb.edu>
  *  Maho Nakata <maho@FreeBSD.org>
  *  Mario S F Ferreira <lioux@FreeBSD.org>
  *  Mario S F Ferreira <lioux@linf.unb.br> et al.
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Mark R V Murray <markm@FreeBSD.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Matthew Seaman <matthew@FreeBSD.org>
  *  Maurice Castro <maurice@serc.rmit.edu.au>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Maxime Henrion <mux@FreeBSD.org>
  *  Michael Haro <mharo@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Johnson <ahze@ahze.net>
  *  Michael Neumann <mneumann@ntecs.de>
  *  Muhammad Moinur Rahmanh <5u623l20@gmail.com>
  *  NAKATA Maho <chat95@mbox.kyoto-inet.or.jp>
  *  NAKATA, Maho <maho@FreeBSD.org>
  *  Nakata Maho <maho@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Olivier Duchateau
  *  Pedro F. Giffuni
  *  Pedro F. Giffuni <giffunip@asme.org>
  *  Pedro Giffuni
  *  Pedro Giffuni <giffunip@asme.org>
  *  Pedro Giffuni <pfg@FreeBSD.org>
  *  Peter Pentchev <roam@FreeBSD.org>
  *  Philip Paeps <philip@FreeBSD.org>
  *  Pierre-Paul Lavoie <ppl@nbnet.nb.ca>
  *  Pietro Cerutti <gahr@FreeBSD.org>
  *  Piotr Rybicki <meritus@innervision.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Rainer Hurling <rhurlin@gwdg.de>
  *  Robert Jenssen
  *  Robin Schilham
  *  Rod Taylor <ports@rbt.ca>
  *  Roman Neuhauser <neuhauser@sigpipe.cz>
  *  Sander Vesik <sander@haldjas.folklore.ee>
  *  Scott Flatman <sf@dsinw.com>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Akifyev <asa@agava.com>
  *  Sergey Akifyev <asa@gascom.ru>
  *  Sergey Skvortsov <skv@FreeBSD.org>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Shell Hung <shell@shellhung.org>
  *  Shin-ya MURAKAMI <murashin@gfd-dennou.org>
  *  Stas Timokhin <devel@stasyan.com>
  *  Stefan A. Deutscher (sad@mailaps.org)
  *  Stefan Esser <se@StefanEsser.FreeBSD.org>
  *  Stephen Montgomery-Smith <stephen@FreeBSD.edu>
  *  Stephen Montgomery-Smith <stephen@FreeBSD.org>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Stephen Montgomery-Smith <stephen@missouri.edu>
  *  Steve Wills <steve@mouf.net>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@f2o.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas (<thierry@pompo.net>)
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Thomas Sandford <freebsduser@paradisegreen.co.uk>
  *  Timothy Bourke <timbob@bigpond.com>
  *  Tony Maher
  *  Tz-Huan Huang <tzhuan@csie.org>
  *  Vsevolod Stakhov <vsevolod@FreeBSD.org>
  *  Vsevolod Stakhov <vsevolod@highsecure.ru>
  *  Waitman Gobble <waitman@waitman.net>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Will Andrews <andrews@technologist.com>
  *  Yi-Hsuan Hsin <mhsin@mhsin.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yinghong.Liu <relaxbsd@gmail.com>
  *  Yoshiaki UCHIKAWA <yoshiaki@kt.rim.or.jp>
  *  Yukihiro Nakai <Nakai@technologist.com>
  *  Yuri Victorovich <yuri@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Yuri Victorovich <yuri@tsoft.com>
  *  Zhen REN <bg1tpt@gmail.com>
  *  amir.husaini@gmail.com
  *  arved
  *  asami
  *  b.f. <bf@FreeBSD.org>
  *  bart <lbartoletti@FreeBSD.org>
  *  bauerm
  *  bf <bf2006a@yahoo.com>
  *  bf <bf@FreeBSD.org>
  *  bf@FreeBSD.org
  *  bremner@unb.ca
  *  chinsan
  *  chuckr@FreeBSD.org
  *  dawe <daweonline@gmail.com>
  *  dbader@ece.unm.edu
  *  dd
  *  demon@FreeBSD.org
  *  dikshie
  *  eserte
  *  fenner
  *  gahr
  *  giffunip
  *  gmarco@giovannelli.it
  *  gurkan@phys.ethz.ch
  *  ijliao
  *  janek@gaja.ipan.lublin.pl
  *  jhs@berklix.com / asami (original)
  *  jmz
  *  js@jeannot.org
  *  keith@FreeBSD.org
  *  ljo
  *  mr
  *  nobu@rd.isac.co.jp
  *  pauls@utdallas.edu
  *  pusto@web.de
  *  reg@shale.csir.co.za
  *  rfarmer@predatorlabs.net
  *  stephen@FreeBSD.org
  *  thierry@pompo.net
  *  tobez
  *  will
  * # Created by Matthias Fechner <mfechner@FreeBSD.org>

With hat:	portmgr

    f53eb28

01:30 Yuri Victorovich (yuri) 

math/sundials: Update 5.7.0 -> 6.2.0

    def6670

08:40 Stephen Montgomery-Smith (stephen) 

math/octave: Remove crud.

    5d42413

08:28 Stephen Montgomery-Smith (stephen) 

math/octave: fix pkg-plist.

- This installed a number of files whose path name is derived from the
  directory in which the port is built.  This is a band-aid fix which
  deletes those files.  This will enable the installation to work if the
  ports directory is something other than /usr/ports.

Reported by:	pkg-fallout@

    3b86347

02:11 Stephen Montgomery-Smith (stephen) 

math/octave: commits that should have accompanied cc8553afd083.

    8b44817

05:22 Loïc Bartoletti (lbartoletti) 

devel/qscintilla-qt5: Update to 2.13.2

Change:
  - https://riverbankcomputing.com/news/QScintilla_2.13.2_Released

    8f81938

21:15 Stephen Montgomery-Smith (stephen) 

math/qhull: Renaming ports

qhull renamed to qhull7.
qhull8 renamed to qhull.
qhull7 marked deprecated.
Dependencies updated.

    5693794

18:44 Thierry Thomas (thierry) 

math/octave: switch to Qhull8

Patch obtained from https://savannah.gnu.org/bugs/download.php?file_id=51705

PR:		261281
Approved by:	stephen (maintainer)

    f1ef83b

20:12 Loïc Bartoletti (lbartoletti) 

*/*: Update qscintilla2 to 2.13.1

Changes:
  - https://riverbankcomputing.com/news/QScintilla_2.13.1_Released

    354d8cf

17:54 Stephen Montgomery-Smith (stephen) 

math/octave: Update to 6.4.0.

    f98aee8

22:33 Yuri Victorovich (yuri) 

math/octave: Update 3.1.2 -> 5.7.0

    8046913

18:01 Stephen Montgomery-Smith (stephen) 

math/octave: Remove extraneous entried in pkg-plist

Bump portrevision.

PR:		258027
Reported by:	lantw44@gmail.com

    996d3f0

18:55 Loïc Bartoletti (lbartoletti) 

*/*: PyQt Update qscintilla2 to 2.13.0 and py-qt5-sip to 12.9.0

Changes:
  - https://riverbankcomputing.com/news/QScintilla_2.13.0_Released
  - https://www.riverbankcomputing.com/hg/sip/raw-file/tip/NEWS
PR:	257308
Exp-run by:	antoine

    8b9c482

03:20 Stephen Montgomery-Smith (stephen) 

math/octave: Update to 6.3.0.

Also bump revision of dependent octave-forge-* ports.

    ed21e80

12:36 Loïc Bartoletti (lbartoletti) 

devel/qscintilla2: Update to 2.12.1

Changelog:
	https://riverbankcomputing.com/news/QScintilla_2.12.1_Released

PR:		257002
Exp-run by:	antoine

    9713ff9

17:02 Stephen Montgomery-Smith (stephen) 

math/octave: Add missing library dependencies.

PR:		256996
Reported by:	Philipp Ost <bsd@philippost.de>

    7ca6c6b

16:55 Loïc Bartoletti (lbartoletti) 

misc/qtchooser: remove

QtChooser allows you to select your version of Qt among those installed.
However, this tool is no longer supported upstream and will not be
available for Qt6.
By default, our Qt installations are done in
${LOCALBASE}/lib/qt${QT_VERSION} as recommended.

We have added symbolic linking for the main binaries to
${LOCALBASE}/bin with the suffix -qt5.

    be86c4f

18:53 Kevin Bowling (kbowling) 

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

    da3162c

10:00 Thierry Thomas (thierry) 

math/suitesparse: adapt dependency lines after modularization

Do not bump PORTREVISION, because this should not change the resulting
packages.

Note for maintainers: try to not depend on the whole suitesparse package,
especially if your port do not require GraphBLAS (the biggest one).

    8470aea

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

09:29 lbartoletti 

PyQt5: Update PyQt5 to 5.15.4 and py-qtbuilder to 1.9.1

PR:		254218
Exp-run by:	antoine

 

06:49 lbartoletti 

PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0

* PyQt5: update to 5.15.3

This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.

 - Added the missing QImage.setAlphaChannel().
 - Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
 - Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.

* QScintilla2: update to 2.12.0

This adds support for Qt6 and removes support for Qt4.

 - Change the new distname (again)i due to a conflict
 - Use the new sip-build system

* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo

PR:		253865
Exp-run by:	antoine

 

22:41 stephen 

- Update math/octave to 6.2.0.
- Bump portrevision of dependent ports.
- Add patches to dependent ports math/octave-forge-* if I can figure them out.
- Mark broken dependent ports I couldn't figure out.

 

19:03 lbartoletti 

Update qscintilla2 to 2.11.6

 

04:27 stephen 

- Remove unused libosmesa, enable sndfile.

PR:		251477
Submitted by:	jcfyecrayz@liamekaens.com

 

15:50 lbartoletti 

Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5

- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts

[1] RiverBankComputing doesn't offer links to download latest version of some
ports

PR:		247369
Reviewed by:	tcberner
Differential Revision:	https://reviews.freebsd.org/D25749
Exp-run by:	antoine

 

18:07 stephen 

- Use math/qhull instead of math/qhull5.
- Bump portrevision.

PR:		249182
Submitted by:	jcfyecrayz@liamekaens.com

 

16:39 yuri 

Bump 37 ports depending on math/openblas through USES=blaslapack:openblas
because after the recent math/openblas update the library name changed in
openblas

 

05:04 lbartoletti 

Update py-sip to 4.19.21 and qscintilla2 to 2.11.4

  - Update py-sip to 4.19.21
  - Update qscintilla2 to 2.11.4
  - Replace MASTER_SITE_RIVERBANK with https versions
  - Replace QSCI2_DISTNAME to match with the new one

PR:		245308
Approved by:	tcberner (mentor)
Exp-run by:	antoine

 

22:42 stephen 

- Update to 5.2.0.

 

14:17 swills 

Fix math/openblas and bump dependent ports

* Fix build on i386 [1]
* Fix science/code_saturne build with new openblas [2]
* Avoid installing private headers [3]
* Prevent build from optimizing for host by correcting build confg [4]
* Bump portrevision of dependent ports [5]

This is correcting issues from r523749 [1][2][4] and r515970 [3]

PR:		231371
Reported by:	build cluster [1]
Reported by:	Dima Pasechnik <dimpase+freebsd@gmail.com> [2]
Reported by:	many [5]
Reviewed by:	mat, bapt
Approved by:	implicit, since this is a build fix

 

21:46 jkim 

Clean up after java/openjdk6 and java/openjdk6-jre removal

java/openjdk6 support was removed from Mk/bsd.java.mk (r512662) and
java/openjdk6 and java/openjdk6-jre were removed from the ports tree
(r512663).  Now this patch completely removes remaining stuff from the
ports tree.

PR:			241953 (exp-run)
Reviewed by:		glewis
Approved by:		portmgr (antoine)
Differential Revision:	https://reviews.freebsd.org/D22342

 

18:07 zeising 

Add USES=xorg USES=gl, ports categories m

Add USES=xorg and USES=gl to ports in categories starting with 'm'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

03:12 stephen 

- add JAVA and QT5 option, improve library stripping.
- Bump portrevision.

PR:		237854
Submitted by:	phascolarctos@protonmail.ch

 

02:57 stephen 

- Remove share/info/dir from pkg-plist, because it is a generated file
  which is updated during installing packages.

PR:		237774
Submitted by:	Ting-Wei Lan <lantw44@gmail.com>

 

13:16 gerald 

Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.

Suggested by:	tijl

 

14:04 sunpoet 

Update devel/readline to 8.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://tiswww.case.edu/php/chet/readline/CHANGES
PR:		236156
Exp-run by:	antoine

 

21:09 stephen 

- Add dependency audio/portaudio.
- Add dependency audio/libsndfile commented out because this port is currently
  vulnerable.
- Bump portrevision.

 

04:56 stephen 

- Update math/octave to 5.1.0.
- Bump portrevision of unbroken octave-forge-* ports.
- Bump portrevision of math/dynare which uses library files from octave.
- Mark broken: octave-forge-(database|dicom|optim|fits|linear|linear|optim|
  parallel|signal|strings|struct|tisean|video).
- Broken optional dependencies in math/octave-forge to default to off.
- Bump portrevision of math/octave-forge.

 

11:13 tijl 

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
in the weak wrapper resolves to the weak wrapper itself creating an infinite
call loop that overflows the stack and causes a crash.  Some of the
allocation functions are variants of C++ new and delete and it probably
depends on the compiler whether these variants are used in other parts of
Qt5Webengine.

Remove the weak wrappers (make them Linux specific).  This isn't binary
compatible but we are already breaking that with the changes to the symbol
versions.

[1]
https://github.com/qt/qtwebengine/commit/5c2cbfccf9aafb547b0b30914c4056abd25942a4
[2]
https://github.com/qt/qtwebengine/commit/2ed5054e3a800fa97c2c9e920ba1e6ea4b6ef2a5
[3]
https://github.com/qt/qtwebengine/commit/009f5ebb4bd6e50188671e0815a5dae6afe39db5

Bump all ports that depend on Qt5.

PR:		234070
Exp-run by:	antoine
Approved by:	kde (adridg)

 

22:46 sunpoet 

Update science/hdf5 to 1.10.4

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://portal.hdfgroup.org/display/support/HDF5%201.10.4#releasenotes
PR:		233070
Submitted by:	wen

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

05:55 stephen 

- Make changes to plist that should have been included with r485798.
- Bump portrevision.

Reported by:	pkg-fallout@

 

21:55 stephen 

- Have the build process use gsed instead of sed.

PR:		ports/233459
Submitted by:	Kyle Evans <kevans@freebsd.org>

 

19:06 stephen 

- Because of r233240, portrevision should have been bumped.

PR:		ports/233357
Submitted by:	Lorenzo Salvadore <phascolarctos@protonmail.ch>

 

15:18 stephen 

- adds USES+= gl (USE_GL without USES+= gl is deprecated);
- adds USES+= desktop-file-utils iconv;
- adds USE_XORG+= xcursor xinerama xrender;
- adds USE_QT+= printsupport sql widgets;
- strips liboctave.so.6.0.0.
- Corrects configure options for --withosmesa

PR:		ports/233240
Submitted by:	Lorenzo Salvadore <phascolarctos@protonmail.ch>

 

18:12 bapt 

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

 

05:24 yuri 

cad/calculix-ccx math/arpack++ math/armadillo math/scilab math/octave: Change
dependency from math/arpack to math/arpack-ng

math/arpack is a dead, unmaintained project, and math/arpack-ng is a maintained
and updated fork.
This commit is effectively a version upgrade of the arpack dependency.

Approved by:	portmgr blanket (does not result in a change in contents of the
resulting package)

 

18:34 zeising 

Change x11/xorgproto to become a build dep

Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained
from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906

 

22:05 sunpoet 

Update science/hdf5 to 1.10.2

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://portal.hdfgroup.org/display/support/HDF5%201.10.2#releasenotes
		https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.10/hdf5-1.10.2/src/hdf5-1.10.2-RELEASE.txt
PR:		231009
Exp-run by:	antoine

 

02:57 stephen 

- Update math/octave to 4.4.1.
- Bump portrevision for all octave-forge-* ports.

 

22:18 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

 

17:39 tcberner 

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

 

00:34 stephen 

- In the log for r469170, I forgot to mention that I added help and
  help-tools to USE_QT4.
- I also forgot to mention Christoph Moench-Tegeder <cmt@burggraben.net>
  who told me these changes.

In this revision:

- Switch from QT4 to QT5.
- Bump portrevision.

Submitted by:	Adriaan de Groot <adridg@freebsd.org>
Obtained from:	https://reviews.freebsd.org/D15328

 

00:24 stephen 

- Fixed error in which -qt4 is passed to QT tools.  It should be -qt=qt4.
- Set MKINFO in configure_args so that makeinfo works.
- Since plist changed, bump portrevision.

PR:		ports/228004
Submitted by:	Robert Cina <transitive@gmail.com>

 

21:45 antoine 

Explicitely disable docs build as it fails when it's attempted (FreeBSD 11+)

perl ./doc/interpreter/mk-qthelp.pl octave.html
doc/interpreter/octave_interpreter && \
qcollectiongenerator -qt4 doc/interpreter/octave_interpreter.qhcp -o
doc/interpreter/octave_interpreter.qhc >/dev/null && \
rm -f doc/interpreter/octave_interpreter.qhcp
doc/interpreter/octave_interpreter.qhp
qcollectiongenerator: could not find a Qt installation of '4'

Reported by:	pkg-fallout
With hat:	portmgr

 

23:42 stephen 

- Update octave to 4.4.0.
- Either bump portrevision or mark broken for octave-forge-* ports.
- Bump port revision for octave-forge.

 

16:19 tcberner 

Update the QScintilla2 ports to 2.10.4

 

06:41 yuri 

math/suitesparse: Update 4.0.2 -> 5.2.0

Port changes:
* Change to DISTVERSION
* Update MASTER_SITES
* Change to LICENSE_COMB=dual
* Add LIB_DEPENDS
* Unbundle metis, made it a dependency
* Update do-build and do-install
* Update WWW

Bump 11 ports.
games/naev is marked broken because it depends on the no longer installed
library.

PR:		210579
Submitted by:	yuri
Submitted by:	pfg
Approved by:	maintainer timeout (maho@FreeBSD.org, 21 months)
Approved by:	maintainer timeout (fortran@FreeBSD.org, 45 days)

 

03:10 stephen 

- Add Makefile.version to share version with ports depending on octave.

PR:		ports/226816
Submitted by:	Yuri Victorovich <yuri@freebsd.org>

 

22:41 stephen 

- Update to 4.2.2.

 

17:46 gerald 

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

 

02:21 stephen 

- Link against osmesa.
- Bump portrevision.

 

19:41 stephen 

- Make sure qscintilla links correctly to octave (otherwise the built in text
editor
  doesn't work in the GUI version).

 

14:40 stephen 

- Make sure build doesn't use qt5 libraries/utilities.

PR:		ports/226246
Submitted by:	Ting-Wei Lan <lantw44@gmail.com>

 

09:14 antoine 

Explicitely disable openmp, for some reasons configure enables it on
10.x amd64 (not other archs) and this causes fallout in some octave-forge
ports

With hat:	portmgr

 

21:52 stephen 

- Update to 4.2.1.
- Maintainership to stephen@.

PR:		ports/225073
Submitted by:	Ben Lauwens <ben.lauwens@gmail.com>

 

09:55 rakuco 

Update QScintilla 2.10.2.

Upstream has renamed its libraries and we no longer need to patch
devel/qscintilla-qt5 to create a library whose name does not conflict with
devel/qscintilla's. However, the library names are different so we need to bump
PORTREVISION in several ports (the SOVERSION has changed too).

Thanks to antoine for the exp-run.

PR:		225928

 

17:43 joneum 

math/octave: Set correct USE_LDCONFIG=

PR:		223690
Reported by:	joneum
Approved by:	maintainer timeout (2 weeks) rene (mentor)
Differential Revision:	https://reviews.freebsd.org/D13245

 

20:55 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

 

09:13 araujo 

Bump PORTREVISION to reflect print/gl2ps changes.

PR:		ports/218399 (based on)
Submitted by:	emaste

 

13:46 sunpoet 

Update devel/readline to 7.0 patch 3

- Bump PORTREVISION for shlib change

Changes:	https://cnswww.cns.cwru.edu/php/chet/readline/CHANGES
		https://lists.gnu.org/archive/html/bug-bash/2016-09/msg00107.html
		https://lists.gnu.org/archive/html/bug-readline/2017-01/msg00002.html
Differential Revision:	https://reviews.freebsd.org/D11172
PR:		219947
Exp-run by:	antoine

 

02:56 sunpoet 

Update science/hdf5 to 1.10.1

- Bump PORTREVISION for shlib change

Changes:	https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.10/hdf5-1.10.1/src/hdf5-1.10.1-RELEASE.txt