*/*: Remove redundant '-[0-9]*' from CONFLICTS_INSTALL

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Approved by: portmgr (blanket)

math/gnuplot: Add CPE information

Approved by:    portmgr (blanket)

x11-toolkits/wxgtk31: Update 3.1.4 -> 3.1.5

Bump 43 ports that either depend on wxgtk31 or potentially depend on it.

Reported by: portscout

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Update to 5.4.1

math/gnuplot: update 5.2.8 -> 5.4.0

PR:		248263
Approved by:	glewis (maintainer)
Relnotes:	http://gnuplot.info/ReleaseNotes_5_4.html

Switch to using GTK3 and WX3

PR:		247565
Submitted by:	Greg V <greg@unrelenting.technology>

- update libgd to 2.3.0
- new option RAQM
- resurrect deprecated gdlib-config
- bump dependend ports

Update to 5.2.8

Fix the 'fig' terminal

PR:		242097
Submitted by:	mjl@luckie.org.nz

Add USES=xorg USES=gl, ports categories m

Add USES=xorg and USES=gl to ports in categories starting with 'm'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

. Update to 5.2.7

Update devel/readline to 8.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://tiswww.case.edu/php/chet/readline/CHANGES
PR:		236156
Exp-run by:	antoine

. Update to 5.2.6

math/gnuplot-lite: Fix plist by deleting empty dirs

Approved by:	portmgr (unbreak)

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

. Update to 5.2.5

Fix build on gcc-based archs by updating USES.

Tested on powerpc64 and amd64 (for no regression).

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

. Update to 5.2.4

. Update to 5.2.3.

. Make bitmap terminals part of the LITE version since they don't require
  any additional dependencies.

Submitted by:	Matthew Luckie <mjl@luckie.org.nz>

Fix packing list substitutions for the lite port.

Prepare for gnuplot-lite by splitting up the configure options, the
dependencies and adding some packing list substitution and hiding some
of it based on the definition of "LITE".

- Switch to options helpers
- Switch to new test framework

Approved by:	portmgr blanket

Cleanup LIB_DEPENDS on libpng

. Update to 5.2.2.
. Remove most options and configure unconditional support for them.
  This is now a full featured port of gnuplot.  If there is enough
  interest then I'll creating a 'gnuplot-lite' port for a minimalist
  version.

. Update to 5.0.7.

. Update to 5.0.6.

Update devel/readline to 7.0 patch 3

- Bump PORTREVISION for shlib change

Changes:	https://cnswww.cns.cwru.edu/php/chet/readline/CHANGES
		https://lists.gnu.org/archive/html/bug-bash/2016-09/msg00107.html
		https://lists.gnu.org/archive/html/bug-readline/2017-01/msg00002.html
Differential Revision:	https://reviews.freebsd.org/D11172
PR:		219947
Exp-run by:	antoine

Register dependency on groff

. Pet portlint.

PR:		215538
Submitted by:	rsmith@xs4all.nl

. Turn gnuplotrc into a sample to avoid complaints if one customises it.

PR:		215538
Submitted by:	rsmith@xs4all.nl

math/gnuplot: 5.0.4 -> 5.0.5

PR:		213684
Changes:	Changes: http://www.gnuplot.info/ReleaseNotes_5_0_5.html
Approved by:	glewis (maintainer)

. Update to 5.0.4.

- update libgd to 2.2.2
- new MASTER_SITES
- add security patch
PR:		210913
Submitted by:	Piotr Kubaj
MFH:		2016Q3
Security: CVE-2015-8874
Security: CVE-2016-3074
Security: http://www.openwall.com/lists/oss-security/2016/07/12/4

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

. Update to 5.0.3.

. Update to 5.0.2.
. Enable gpic and mif terminals by default.

Drop PLOT option.

gnuplot completely removed support for the gnugraph and unixplot terminal
drivers in 2011. From the one of the ChangeLog files:

> 2011-05-31  Ethan A Merritt  <merritt@u.washington.edu>
> [...]
> Remove obsolete terminal drivers gnugraph and unixplot. The underlying
> gnu plotutils library is itself more than 10 years out of date (last
> release July 2000) and the terminal drivers haven't been upgraded for
> longer than that. In any event, current gnuplot has better native
> terminal drivers for the devices supported by unixplot/gnugraph.

In practice, this means the PLOT option is a no-op and the dependency on
graphics/plotutils is unnecessary. Indeed, if one looks at the port's build
logs in the cluster the following can be seen:

configure: WARNING: unrecognized options: --without-lisp-files, --with-plot,
--disable-thin-splines, --with-wx-config

PR:		205488
Approved by:	glewis (maintainer)

math/gnuplot: 4.6.6 -> 5.0.1

- Changes:
  http://www.gnuplot.info/ReleaseNotes_5_0_1.html
- The "gnuplot mode" elisp and TeX files for use with emacs are now
  maintained as a separate project

PR:		204886
Submitted by:	pi
Approved by:	glewis (maintainer), via mail

math/gnuplot: remove WX_UNICODE, is no-op

PR:		204372
Approved by:	glewis (maintainer)

Remove ansi version fo wxGTK 2.8 and only keep the unicode version

All applications in the ports tree works correctly with unicode version of wxGTK

Newer version of wxGTK are unicode only (3.0+)

Note that now WX_UNICODE macro is noop

. Add USES=readline for the readline dependency.

PR:		197995
Submitted by:	johans@

Remove $FreeBSD$ from patches files everywhere.

With hat:	portmgr
Sponsored by:	Absolight

- Fix build with lang/lua53

PR:		196885
Submitted by:	sunpoet (myself)
Approved by:	maintainer (timeout, 1 month)

Unbreak

- Separate TeX style files from math/gnuplot into math/gnuplot-tex-extras
  to eliminate huge TeXLive dependency.  Note that TeX terminal support is
  still enabled by default because it works without them.

- Add Lua dependency to support TeX/Tikz terminal.

Approved by:	glewis (maintainer)

Cleanup plist

. Update to 4.6.6.

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

. Revert WX version to 2.8 and add a comment about not updating it to 3.x
  since that breaks.

PR:		192121

Switch to wx 3.0
Add dvips dependency to build gnuplot.ps with texlive

- Chase revision 353604 to graphics/plotutils.

See:    http://svnweb.freebsd.org/ports?view=revision&revision=353604

. Force WX version to 2.8 since gnuplot is apparently not ready to work
  with newer versions.

PR:		188628

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

. Update to 4.6.5.

TEX options requires latex

Reported by:	pkg-fallout
With hat:	portmgr

Switch gnuplot to wxGTK 3.0 and texlive

. Fix "make package" without DOCS

PR:		186501
Submitted by:	Craig Leres <leres@ee.lbl.gov>

Copy EXAMPLES files into stagedir

Reported by:	QAT

Support stage
Use options helpers
Modernize lib_depends

Disable the PDF option as it pulls in a dependency on pdflib which is
marked RESTRICTED.  This allows building packages for gnuplot and all
ports that depend on it (over a 100, mostly math/octave related).

Approved by:	glewis (maintainer)

Import a bunch of iconv fixes.

Submitted by:	marino
Approved by:	portmgr (bapt, implicit)

Add NO_STAGE all over the place in preparation for the staging support (cat:
math)

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- update libdg to 2.1.0

. Update COMMENT and pkg-descr, based on the Official Gnuplot Manual [1]
. Fix conversion to OptionsNG (someone forgot NOPORTDOCS and NOPORTEXAMPLES) [1]
. Add EXAMPLES to the list of options [1]
. Use standard DESC lines for a few common options (like X11) [1]
. Trim version numbers from LIB_DEPENDS [1]
. Add DOCS to the list of options
. Rename the TETEX option to TEX (since teTeX is no longer the only version
  of TeX that can be installed)

PR:		177452 [1]
Submitted by:	Kevin Zheng <kevinz5000@gmail.com> [1]

Rectify USE_TEX to support both of teTeX and TeXLive.

TEX_DEFAULT:
	A knob to choose teTeX or TeXLive.  One can specify in /etc/make.conf.

USE_TEX:
	A knob for port developers.  Valid keywords are listed in
	bsd.tex.mk.

Remove *_DEPENDS from ports which depend on teTeX and add USE_TEX=tetex
instead to make migration to TeXLive easier.

. Update to 4.6.3.

Feature safe:	yes

. The entry for app-defaults/Gnuplot is hidden behind %%X11%%, so hide the
  corresponding dirrm directive behind it to.  Fixes the packing list when
  X11 is not set.

Submitted by:	sunpoet@

. Make gnuplot compile with clang and hence remove the GCC requirement.

Submitted by:	tijl@

. Update to 4.6.2.

. Update to OptionsNG.

Feature safe:	yes

. Update to 4.6.1

Feature safe:	yes

Force numerous ports that fail to build with clang over to instead always
rely on gcc.  The patch uses the new USE_GCC=any code in Mk/bsd.gcc.mk to
accomplish this.

The ports chosen were ports that blocked 2 or more ports from building with
clang.  (There are several hundred other ports that still fail to build with
clang, even with this patch.  This is merely one step along the way.)

Those interested in fixing these ports with clang, and have clang as their
default compiler, can simply set FORCE_BASE_CC_FOR_TESTING=yes.

For those who have gcc as their default compiler, this change is believed
to cause no change.

Hat:		portmgr
Tested with:	multiple runs on amd64-8-exp-bcm and 9-exp-clang, with various
		combinations of patch/no-patch and flag settings.

- update png to 1.5.10

. Restore the bitmap terminal.

PR:             167657
Submitted by:   Matthew Luckie

. Update to 4.6.0.

Submitted by:   hrs@

Chase pdflib.so version and bump PORTREVISION accordingly.

. Update to 4.4.4.
. Tweak TEX settings to preserve packing list correctness.
. Limit WX version to 2.8 until problems with 2.9 are resolved.

. Mark as MAKE_JOBS_SAFE.

. Update to 4.4.3

PR:             157432
Submitted by:   bf@

Bump PORTREVISION after open-mofit update

- Get Rid MD5 support

. Fix the packing list when either the X11 or TETEX options are off.

PR:             148506
Submitted by:   Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>

. Make the dependency on cairo optional.
. Make the dependency on X11 an actual option.

PR:             147679
Submitted by:   Dmitry <dmitry2006@yandex.ru>

. Update to 4.4.0.
. Turn on the WX option by default.

PR:             146040
Submitted by:   makc@

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

. Update to 4.2.6.

PR:             138742
Submitted by:   bf <bf1783@gmail.com>

- Switch SourceForge ports to the new File Release System: categories starting
with M

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

. Update to 4.2.5.

PR:             134575
Submitted by:   Yi-Jheng Lin <yzlin@cs.nctu.edu.tw>

. Update to 4.2.4.

PR:             128361
Submitted by:   bf <bf2006a@yahoo.com>

. Update to 4.2.3.
. Respect NOPORTEXAMPLES, use PORTEXAMPLES in the packing list.

PR:             122684
Submitted by:   bf <bf2006a@yahoo.com>

USE_XLIB -> USE_XORG

Approved by:    maintainer

. Don't try to regenerate gnuplot.texi when emacs is installed as this
  currently fails.

Reported by:    Andriy Gapon <avg@icyb.net.ua>