Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

math: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Alessando Sagratini <ale_sagra@hotmail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Amarendra Godbole <amarendra.godbole@gmail.com>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Fehlner (fehlner@gmx.de)
  *  Andrew L. Neporada <andrew@chg.ru>
  *  Andrey <gugu@zoo.rambler.ru>
  *  Andrey Zakhvatov

math/gmp: Add CPE information

Approved by:	portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

Update to 6.2.1 release.

Allow to build on RISC-V architecture.

PR:		250939
Submitted by:	Dennis Clarke <dclarke@blastwave.org>

math/gmp: fix build on powerpc64le with CPU_OPTS

Update to 6.2.0 release.

PR:		244658
Submitted by:	daniel.engberg.lists@pyret.net

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Force commit.

Force commit to correct attribution:

Differential Revision:	https://reviews.freebsd.org/D13127

Add patch to enable on powerpcspe.

Tested for harmlessness on amd64.

Differential revision:	https://reviews.freebsd.org/D14335
Submitted by:		jhibbits

- Switch to new test framework

Approved by:	portmgr blanket

- Mark MAKE_JOBS_SAFE, this fixes build on mips and mips64

Approved by:	portmgr blanket

Switch WWW to https.

Set MAKEINFO to the full path of makeinfo when USES=makeinfo is set.

PR:		221027
Reviewed by:	mat
Approved by:	portmgr (antoine)

Zero memory used by mpn_lshift_com configure test,  this should fix
configure when malloc debugging is turned on (default on head)

With help from:	dim@
Reported by:	pkg-fallout

Finally update to 6.1.2 release, it should work fine with currently supported
FreeBSD releases.

PR:		217071
Submitted by:	Iblis Lin <iblis@hs.ntnu.edu.tw>

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

math/gmp: use CONFIGURE_TARGET rather than recreating it

The --build configure argument is a re-invention of CONFIGURE_TARGET
except that platform is hardcoded to freebsd rather than the value
of OPSYS:tl.  Use CONFIGURE_TARGET instead.  It's a no-op for FreeBSD
but is a fix for DragonFly.

Approved by:	non-invasive DF support blanket

- Fix trailing whitespace in pkg-descrs, categories [g-n]*

Approved by:	portmgr blanket

Drop :keepla from USES:libtool.

PR:		202029
Submitted by:	Ting-Wei Lan <lantw44@gmail.com>
Exp-run by:	antoine@
Approved by:	maintainer timeout (6 months)

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

Fix build on system built WITHOUT_INFO

With hat:	portmgr

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

Convert to USES=libtool

The MCPU_OPTS conditional block currently incorrectly sets ABI=64 for
all ARCH strings that in 64. GMP expects mode64, mode32 or 32 as valid values
for the ABI option [1]. Using an invalid value causes the following
build error on powerpc64:

    configure: error: ABI=64 is not among the following valid choices:
    mode64 mode32 32

This is the minimum change to set the correct "mode64" ABI value when
ARCH is powerpc64, while also keeping all other semantics the same. A
more complete refactor of this port is possible, but would need an
exp-run to test for regressions.

The change was tested on powerpc64 (thanks justin) and amd64 (for regression)

While I'm here:

- Remove indefinite article from COMMENT

[1] https://gmplib.org/manual/Build-Options.html

PR:		ports/179127
Submitted by:	jhibbits
Reviewed by:	jhibbits, ak
Approved by:	maintainer timeout (6 months)

Update to 5.1.3 release.

Remove NO_STAGE to ports natively stage ready shown by a FORCE_STAGE exp-run

Exp-run by:	bdrewery

Add NO_STAGE all over the place in preparation for the staging support (cat:
math)

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

Update to 5.1.2 release.

Update to 5.1.1 release.

Fix build on ARM (temporary fix).

Update to 5.1.0 release.

Update to 5.0.5 release.

Update to 5.0.4 release.

Update to 5.0.3 release and pet portlint.

- Remove WITH_FBSD10_FIX, is no longer needed

- Fix build on FreeBSD 10

Approved by:    ale@ (maintainer)

Remove more tags from pkg-descr files fo the form:

- Name
em@i.l

or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.

Update to 5.0.2 release.

- Get Rid MD5 support

Update to 5.0.1 release.

Feature safe:   yes

Update to 5.0.0 "performance" release.

Forced commit: repocopy from math/libgmp4 to math/gmp.

PR:             ports/142861
Submitted by:   ale
Repocopied by:  marcus