Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

mail: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ashish@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam David <adam@FreeBSD.org>
  *  Adam McDougall <mcdouga9@egr.msu.edu>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alex Deiter <tiamat@komi.mts.ru>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alex Perel <veers@disturbed.net>

mail/p5-MIME-Tools: Update to 5.510

Changes:	https://metacpan.org/dist/MIME-tools/changes

Remove # $FreeBSD$ from Makefiles.

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.

Approved by:	portmgr (adamw)

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

Update to 5.509

Changes:	http://search.cpan.org/dist/MIME-Tools/ChangeLog

- Update to 5.508
Changes: http://cpansearch.perl.org/src/DSKOLL/MIME-tools-5.508/ChangeLog

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

- Update to 5.507
- Add NO_ARCH

Changes:	http://search.cpan.org/dist/MIME-Tools/ChangeLog

Update to 5.506.

Remove dependency on p5-IO-stringy that has been stale for 4 years.
Technically the dependency on p5-Convert-BinHex isn't required
either but it's listed as recommended so I'm leaving it in.

Also, remove the superfluous DOCS option, and sort plist.

Changes: https://metacpan.org/changes/distribution/MIME-tools

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

- Update to 5.505
- Convert to new options framework

Changes:	http://search.cpan.org/dist/MIME-Tools/ChangeLog

Support STAGEDIR.

Try and be consistent with what commands are silent and not in *install.

- MKDIR is silent
- ECHO is silent
- INSTALL_* are not silent
- CP/FIND/... are not silent

I fixed a few PORTDOCS misusage, I'll do a second pass.

With Hat:	perl@

Fix NO_STAGE attribution

Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)

- Convert to new perl framework
- Trim Makefile header
- Remove MAKE_JOBS_SAFE=yes, it's the default.

For perl@ owned ports:

- Fix COMMENT
- Trim header

Update to 5.504.

Changes:	http://search.cpan.org/dist/MIME-tools/ChangeLog

- Update to 5.503
- Add LICENSE (Artistic 1 & GPL 1)
- Expand the value of BUILD_DEPENDS before assigning it to RUN_DEPENDS
- Fix typo in plist

Changes:        http://search.cpan.org/dist/MIME-tools/ChangeLog

- Add TEST_DEPENDS to allow testing

Update to 5.502

Changelog: http://cpansearch.perl.org/dist/MIME-tools/ChangeLog

..MIME::tools 5.500 or 5.501 both had serious bugs...

- Update to 5.501
ChangeLog: http://cpansearch.perl.org/src/DSKOLL/MIME-tools-5.501/ChangeLog

- Update to 5.428

- Remove unneeded dependencies which is in perl-5.8.9 dist from ports
  maintained by (perl|ports|kuriyama)@FreeBSD.org.

- Targets are: Test::Simple, Digest::MD5, Locale-Maketext,
  ExtUtils::MakeMaker, ExtUtils::ParseXS, File::Temp, Getopt::Long,
  Encode, Digest, Pod::Parser, File::Spec.

- lang/perl5.6 is dead, remove PERL_LEVEL/PERL_VERSION < 500801 checks

PR:             ports/135398
Tested by:      2 -exp runs by pav
Approved by:    portmgr (pav)

- simplify dependency
- update WWW in pkg-descr
- bump PORTREVISION

- use @dirrmtry instead of @dirrm

PR:             128190
Submitted by:   sunpoet at sunpoet.net

Fix plist.

Approved by:    portmgr (linimon)

- Update to 5.427
- Pet portlint

I can't find any good reason as why this p5- port does not use PKGNAMEPREFIX,
while I'm at it, use the new macro style MASTER_SITES.

Update to 5.426

- Update to 5.425

- Update to 5.423

- Update to 5.422

Tested by:      Lee Dilkie <lee_dilkie@mitel.com>

- Update to 5.421

Example files are no longer in the distfile, so don't try to install
them.  While I'm here, remove 4.x cruft.

Submitted by:   pointyhat via kris

Update to 5.420.  Require perl from ports.

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Update to 5.419.

Take a perl@ hat and add SHA256 checksums

Update to 5.418.

Update to 5.417.

Update to 5.416
Add examples and some docs

Update to 5.415

Reset maintainer to perl@.

Restore PORTEPOCH that disappeared in the last update.

Upgrade to the official 5.414 version. All our patches have been merged.

- add missing entry (MIME::Decoder::BinHex) in PLIST and MAN3
- remove *.orig in post-patch phase
- shorten PKGMESSAGE to makes portlint happier
- bump PORTREVISION

PR:             71360
Submitted by:   leeym
Approved by:    portmgr (marcus)

Fix the workaround for corrupted PDF files, so that all other kind of data are
decoded and not just wiped out :-)

Approved by:    portmgr (krion)
Pointy Hat To:  mbr

Add fix/workaround for corrupted PDF files attached as
quoted-printable encoded MIME attachments by some popular
email-client versions on windows.

Bump port revision and port epoch since the port distfile itself
has not changed. All comitted patches have been accepted by the
current MIME-Tools maintainer and will be part of the next release.

Readd p5-MIME-Base64 as default dependency and add new needed
p5-Convert-BinHex (we support now BinHex decoding).

Add BinHex support.

Submitted by:   Julian Field <mailscanner@ecs.soton.ac.uk>

Return undef or the parsed MIME::Entity in parse_data().

Submitted by:   David F. Skoll <dfs@roaringpenguin.com>

Limits the number of MIME parts we will parse.

Normally, instances of this class parse a message to the bitter end.
Messages with many MIME parts can cause excessive memory consumption.
If you invoke this method, parsing will abort with a die() if a message
contains more than NUM parts.

Submitted by:   David F. Skoll <dfs@roaringpenguin.com>

Remove whitspaces from exorcise_filename() and make evil_filename()
recognize path or special characters.

Submitted by:   Julian Field <mailscanner@ecs.soton.ac.uk>
                Martin Blapp <mbr@freebsd.org>

Fix encoding corruption. rt.cpan.org: Bug #7457

encode_qp() since version 3.02 takes up 3 args. Third arg is a flag indicating
binary
mode. Since the flag meaning is inverted comparing to the MIME::Base64 patch
suggested
originally, the corresponding MIME-tools patch needs to be modified also.

Submitted by:   ak2@smr.ru

Parser memory leak fixed. The closure-based task/benchmark mechanisms created
for 5.5
were leaking references like crazy.  That's been stopped.

Taken from MIME-Tools 6.002

Correct "7_bit", "7-bit", and "7 bit" to
"7bit"; likewise for "8bit".

Taken from MIME-Tools 6.002

SIZEify.

Submitted by:   trevor

Apply security related patches.

PR:             ports/59457
Submitted by:   Jan-Peter Koopmann <j.koopmann@seceidos.de>

Back out previous upgrade because of incompatibility.

Requested by:   many

Mark $IGNORE if PERL_LEVEL < 500600.

Reported by:    Guido Falsi <mad@madpilot.net>

Upgrade to 6.200_02.

PR:             ports/58066
Submitted by:   "Ying-Chieh Chen" <yinjieh@csie.nctu.edu.tw>

utilize SITE_PERL

PR:             58166
Submitted by:   Cheng-Lung Sung <clsung@dragon2.net>

de-pkg-comment.

Conditionalise several dependencies on PERL_LEVEL to make those ports more
friendly for perl-5.8.0, which has those dependencies included into the
base distribution.

Sponsired by:   Porta Software Ltd

Remove *.orig after patch.

Submitted by:   tobez

Apply a patch to fix some problems reported on bugtraq.
White space nits in original patch are ignored.

References:    
http://online.securityfocus.com/archive/1/275282/2002-06-01/2002-06-07/0
Obtained from:  http://www.roaringpenguin.com/mimedefang/mime-tools-patch.txt
Reported by:    "Mike Jakubik" <mikej@trigger.net>

Upgrade to 5.411a.

PR:             ports/36051
Reported by:    Emil Sit <sit@mit.edu>

Upgrade to 5.410.    

Spaces->tabs in the mail category.    

Use $PERL_CONFIGURE.    

Upgrade to 5.409.    

Add 1 @unexec rmdir.    

Upgrade to 5.316.   Take over maintainership.    

Convert category mail to new layout.