| non port: mail/maildrop/Makefile |
|
SVNWeb
|
Number of commits found: 125 (showing only 100 on this page) |
|
Mon, 14 Aug 2023
|
[ 15:52 Guido Falsi (madpilot)  ]    9451e34
mail/maildrop: Update to 3.1.6
|
|
Mon, 1 May 2023
|
[ 09:05 Guido Falsi (madpilot) ] d117165
mail/maildrop: Update to 3.1.5
|
|
Sat, 8 Apr 2023
|
[ 09:31 Guido Falsi (madpilot) ] f2cc6d0
mail/maildrop: Update to 3.1.4
Remove upstreamed patch.
|
|
Wed, 5 Apr 2023
|
[ 17:20 Guido Falsi (madpilot) ] 69e0c19d
mail/maildrop: Update to 3.1.2
- Added patch required to make it build when DOVECOTAUTH option is
enabled.
|
|
Mon, 20 Feb 2023
|
[ 11:31 Guido Falsi (madpilot) ] 720ca48
mail/maildrop: Update to 3.1.1
|
|
Mon, 12 Dec 2022
|
[ 20:31 Guido Falsi (madpilot) ] 1de9af2
mail/maildrop: Update to 3.1.0
|
|
Tue, 15 Nov 2022
|
[ 09:47 Guido Falsi (madpilot) ] 3d69598
mail/maildrop: Update to 3.0.9
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] b587cc2 (Only the first 10 of 577 ports in this commit are shown above. )
mail: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ashish@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam David <adam@FreeBSD.org>
* Adam McDougall <mcdouga9@egr.msu.edu>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Deiter <tiamat@komi.mts.ru>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alex Perel <veers@disturbed.net> (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 1 Jun 2022
|
[ 13:50 Guido Falsi (madpilot) ] 2d7bc12
mail/maildrop: Update to 3.0.8
|
|
Mon, 17 Jan 2022
|
[ 21:57 Guido Falsi (madpilot) ] f2a066f
mail/maildrop: Update to 3.0.7
|
[ 11:43 Guido Falsi (madpilot) ] a086a65
mail/maildrop: Update to 3.0.4
Add new dependency.
|
|
Fri, 29 Oct 2021
|
[ 09:50 Stefan Eßer (se) ] 819f25b (Only the first 10 of 388 ports in this commit are shown above. )
*/*: Remove redundant '-[0-9]*' from CONFLICTS
The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").
Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".
Approved by: portmgr (blanket)
|
|
Sun, 29 Aug 2021
|
[ 18:19 Bernhard Froehlich (decke) ] 9abe951
mail/maildrop: Add CPE information
Approved by: portmgr (blanket)
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 22 Mar 2021
|
[ 17:22 madpilot ]  
- Update maildrop to 3.0.3
- Remove FAM option due tro upstream dropping support
- Add new INOTIFY option (off by default) to enable using new inotify API
provided by upstreeam, adds an optional dependency on devel/libinotify
- While here sort options list
|
[ 17:13 madpilot ] (Only the first 10 of 15 ports in this commit are shown above. )
- Update courier-unicode to 2.2.2
- Bump PORTREVISION of depdendent ports due to shlib version bum
|
|
Thu, 11 Feb 2021
|
[ 08:07 madpilot ]
Update maildrop to 3.0.2
|
|
Sat, 20 Jun 2020
|
[ 10:20 madpilot ]
Update maildrop to 3.0.1
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Tue, 2 Apr 2019
|
[ 03:35 yuri ] (Only the first 10 of 50 ports in this commit are shown above. )
dns/libidn: Update to 1.35
Bump 48 ports.
Previous update to 1.34 broke jabberd.
PR: 228048
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Sun, 11 Nov 2018
|
[ 15:38 danfe ] (Only the first 10 of 65 ports in this commit are shown above. )
Update `databases/gdbm' to version 1.18.1, an important bugfix release
which restores compatibility with old databases (version 1.8) and some
later versions which were built without mmap(2) support. Due to shlib
version change, bump port revisions of the consumer ports.
PR: 233059
Exp-run by: antoine
Approved by: maintainer (johans, numerous timeouts)
|
|
Wed, 10 Oct 2018
|
[ 11:54 madpilot ] (Only the first 10 of 19 ports in this commit are shown above. )
- Update devel/courier-unicode to 2.1
- Convert to USES localbase
- Update mail/cone to 1.0 [1]
- Update mail/courier-imap to 5.0.0
- Add LICENSE
- Update mail/maildrop to 3.0.0
- Remove IDN option since it's now mandatory
- Update mail/sqwebmail to 6.0.0 [2]
- Update security/courier-authlib to 0.69.0
- Add note to UPDATING
- Silence some portlint warnings
PR: 231471 [1]
Submitted by: me
Approved by: Maintainer timeout [1],
oliver@ [2]
Differential Revision: https://reviews.freebsd.org/D17234
|
|
Sun, 29 Jul 2018
|
[ 22:18 gerald ] (Only the first 10 of 1480 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
|
|
Sat, 2 Jun 2018
|
[ 19:40 linimon ] (Only the first 10 of 29 ports in this commit are shown above. )
Adjust USES to fix building on gcc-based archs (in particular, powerpc64).
On the clang architectures, these changes have no effect: the baser
compiler already includes the needed features.
While here, remove now-redundant CXXFLAGS statements and pet portlint
(no other content change).
Tested on both powerpc64 and amd64.
Approved by: portmgr (tier-2 blanket)
|
|
Mon, 4 Dec 2017
|
[ 23:55 madpilot ]
Update mail/maildrop to 2.9.3
|
|
Thu, 5 Oct 2017
|
[ 15:40 madpilot ]
Update maildrop to 2.9.2
|
|
Tue, 22 Aug 2017
|
[ 13:03 madpilot ]
Update maildrop to 2.9.1
|
|
Thu, 6 Jul 2017
|
[ 11:56 madpilot ] (Only the first 10 of 26 ports in this commit are shown above. )
- Update devel/courier-unicode to 2.0
- Update mail/cone to 0.96
- Update mail/courier-imap to 4.18.0 [1]
- Update mail/maildrop to 2.9.0
- Update mail/sqwebmail to 5.9.0 [1]
- Update security/courier-authlib (and slaves) to 0.68.0 [1]
On request from oliver@, take maintainership of the courier-authlib
ports and the courier-imap port.
Approved by: oliver@ (maintainer) [1]
Differential Revision: https://reviews.freebsd.org/D11467
|
|
Fri, 20 Jan 2017
|
[ 09:15 madpilot ]
- Update maildrop to 2.8.5
- Convert to USES=localbase
- Make unneeded += a simple =
|
|
Tue, 16 Aug 2016
|
[ 15:40 madpilot ]
Update to 2.8.4.
|
|
Fri, 1 Apr 2016
|
[ 14:16 mat ] (Only the first 10 of 2612 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 6 Jan 2016
|
[ 11:34 madpilot ]
Stop DOCS option appearing twice in this port.
PR: 205924
Submitted by: marino@
MFH: 2016Q1
|
|
Mon, 7 Sep 2015
|
[ 21:29 madpilot ] (Only the first 10 of 13 ports in this commit are shown above. )
- Update to devel/courier-unicode to 1.4
- Chase shlib bump
|
|
Fri, 3 Jul 2015
|
[ 09:16 madpilot ]
- Update mail/courier-imap to 4.16.2
- Update mail/sqwebmail to 5.8.3
- Update security/courier-authlib to 0.66.3
- Remove no more needed patch from mail/maildrop
Approved by: oliver (maintainer)
Differential Revision: https://reviews.freebsd.org/D2975
|
|
Tue, 30 Jun 2015
|
[ 10:39 madpilot ]
- Update mail/courier-unicode to 1.3
- Update mail/maildrop to 2.8.3
- Add make.conf variable for maildrop to force it choosing a non standard
mailbox directory [1]
Reported by: Jim Trigg <jktrigg at gmail.com> [1]
|
|
Thu, 30 Apr 2015
|
[ 09:14 madpilot ] (Only the first 10 of 31 ports in this commit are shown above. )
- Update courier-unicode to 1.2
- Update courier-imap to 4.16.1
- Update maildrop to 2.8.2
- Update sqwebmail to 5.8.2
- Update courier-authlib to 0.66.2
- Some plist and Makefile modernization
Approved by: oliver@ (as maintainer of various of these ports)
Differential Revision: https://reviews.freebsd.org/D2391
|
|
Sun, 14 Dec 2014
|
[ 14:33 madpilot ]
Update to 2.8.1
|
[ 13:19 madpilot ]
Update to 2.8.0
With this version the dovecotauth patch has been integrated upstream.
|
|
Tue, 30 Sep 2014
|
[ 15:04 madpilot ]
- Modify comment and add UPDATING entry to explain that MAILDROP_SUID
and MAILDROP_SGID now need to be existing usernames on the destination
system. numeric UIDs and GIDs, or non existent usernames, will
cause a broken installation since pkgng will skip on the entries
of files owned by unknown users. [1]
- Fix MGID and MUID PLIST_SUB variables not being set when only one
of the two above variables is deifined, again generating a broken
package. [2]
- While here, remove dirrm.
Reported by: Lukas Maly <Iam@LukasMaly.NET> [1]
Reported by: itetcu@ [1] [2]
|
|
Wed, 3 Sep 2014
|
[ 13:21 madpilot ]
- Update to 2.7.2
- Allow packaging as a user adn don't use @exec directives in plist
|
|
Sat, 30 Aug 2014
|
[ 18:18 tijl ] (Only the first 10 of 51 ports in this commit are shown above. )
dns/libidn:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Always install libidn-components.png because it is used by libidn.info
- Add -lintl to Libs.private instead of Libs in libidn.pc
|
|
Wed, 16 Jul 2014
|
[ 03:00 adamw ] (Only the first 10 of 88 ports in this commit are shown above. )
Add DOCS option for ports with PORTDOCS in plist.
|
|
Mon, 5 May 2014
|
[ 16:40 madpilot ]
Fix build with latest clang when option AUTHLIB is turned on (default off)
PR: ports/189364
Submitted by: Andre Lehmann <blacktux82@gmail.com>
MFH: 2014Q2
|
|
Tue, 22 Apr 2014
|
[ 23:39 madpilot ]
- Prevent from auto-detecting fam library when FAM option is unset
- Add IDN option and stop auto-detection of libidn
- Prefer base iconv
- Add USE_PERL5=build since it is needed only for build
- Use ${opt}_CONFIGURE_OFF knob for MAILWRAPPER option.
PR: ports/188839
Submitted by: Yasuhiro KIMURA <yasu@utahime.org>
|
|
Mon, 17 Mar 2014
|
[ 08:37 madpilot ]
Convert to new USES=tar
|
|
Fri, 14 Feb 2014
|
[ 16:52 miwi ]
- Remove gmake complete builds fine without everywhere.
|
[ 16:25 miwi ]
- Remove now useless bmake/fmake check
- Convert USE_GMAKE to USES
|
|
Sat, 4 Jan 2014
|
[ 23:40 antoine ] (Only the first 10 of 32 ports in this commit are shown above. )
Convert the tree to USES=fam
Approved by: portmgr (bapt)
|
|
Fri, 29 Nov 2013
|
[ 12:00 madpilot ]
- Update to 2.7.1
- While here, remove whitespace before end of line
|
|
Fri, 4 Oct 2013
|
[ 00:46 madpilot ]
- Update to 2.7.0
- Also update dovecot auth patch to apply to this new version
- Properly convert to options and use options helpers
- Convert to new LIB_DEPENDS format
- Support staging
|
|
Fri, 20 Sep 2013
|
[ 19:59 bapt ] (Only the first 10 of 748 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)
|
|
Wed, 14 Aug 2013
|
[ 22:35 ak ] (Only the first 10 of 1725 ports in this commit are shown above. )
- Remove MAKE_JOBS_SAFE variable
Approved by: portmgr (bdrewery)
|
|
Wed, 31 Jul 2013
|
[ 12:16 madpilot ]
Convert to new perl framework.
|
|
Mon, 8 Jul 2013
|
[ 18:44 madpilot ]
Convert the ports I maintain to USES=gmake.
|
|
Tue, 7 May 2013
|
[ 13:12 bapt ] (Only the first 10 of 23 ports in this commit are shown above. )
Add some shebangfix to allow building most of the ports tree without
/usr/bin/perl
Submitted by: John Marino
Obtained from: DPorts
|
|
Fri, 3 May 2013
|
[ 13:54 bapt ]
Fix build with bmake as make
|
|
Sat, 27 Apr 2013
|
[ 11:59 mva ] (Only the first 10 of 219 ports in this commit are shown above. )
- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here
Reviewed by: zeising
|
|
Mon, 10 Dec 2012
|
[ 19:11 mm ] (Only the first 10 of 233 ports in this commit are shown above. )
Update PCRE to 8.32
Introduces the UTF-32 library pcre32
Bump PORTREVISION in dependent ports
|
|
Sat, 20 Oct 2012
|
[ 08:49 madpilot ]
- Fix paths to html documentation in man pages [1]
- Bump PORTREVISION
- While here perform a whitespace fix and move MAN* variables where
they belong.
Reported by: Bjoern Voigt <bjoernv@arcor.de> [1]
Feature safe: yes
|
|
Fri, 28 Sep 2012
|
[ 17:26 madpilot ]
- Update to 2.6.0
- Add conflict with mail/courier [1]
- Rename files shared with other ports [2]
- Trim Makefile headers
- Take maintainership
PR: ports/168616 (fixed by [1] and [2])
Submitted by: "Sulev-Madis 'ketas' Silber" <madis555@hot.ee>
Approved by: crees, tabthorpe (mentors, implicit)
|
|
Fri, 3 Aug 2012
|
[ 15:35 garga ]
Drop maintainership since i don't use it anymore
|
|
Mon, 2 Jul 2012
|
[ 22:24 garga ]
Remove lib version from LIB_DEPENDS to silence portlint
|
|
Tue, 14 Feb 2012
|
[ 12:45 mm ] (Only the first 10 of 140 ports in this commit are shown above. )
Bump pcre library dependency due to 8.30 update
|
|
Wed, 28 Dec 2011
|
[ 15:23 garga ]
- Update to 2.5.5
- Pet portlint
|
|
Fri, 4 Nov 2011
|
[ 20:01 garga ]
Update to 2.5.4
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Mon, 12 Sep 2011
|
[ 13:46 gabor ] (Only the first 10 of 56 ports in this commit are shown above. )
- Track dependencies after databases/gdbm update
|
|
Mon, 8 Nov 2010
|
[ 11:36 garga ]
Update to 2.5.2
|
|
Fri, 5 Nov 2010
|
[ 16:03 garga ]
Update to 2.5.1
|
|
Wed, 2 Jun 2010
|
[ 17:40 garga ]
- Update to 2.5.0
- Add new option WITH_DOVECOTAUTH
PR: ports/147302
Submitted by: Marko Njezic <mrmax063@maxempire.com>
|
|
Tue, 4 May 2010
|
[ 17:30 garga ]
- Update to 2.4.3
|
|
Mon, 1 Mar 2010
|
[ 11:01 garga ]
Update to 2.4.2
PR: ports/144341
Submitted by: Yasuhiro KIMURA <yasu at utahime.org>
Feature safe: yes
|
|
Mon, 22 Feb 2010
|
[ 15:42 garga ]
Update to 2.4.0
PR: ports/143721
Submitted by: Yasuhiro KIMURA <yasu at utahime.org>
Feature safe: yes
|
|
Tue, 12 Jan 2010
|
[ 13:05 garga ]
Update to 2.3.0
|
|
Sat, 22 Aug 2009
|
[ 00:28 amdmi3 ] (Only the first 10 of 287 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with M
|
|
Wed, 1 Jul 2009
|
[ 17:12 garga ]
Update to 2.2.0
PR: ports/136217
Submitted by: Yasuhiro KIMURA <yasu@utahime.org>
|
|
Sat, 28 Mar 2009
|
[ 17:53 garga ] (Only the first 10 of 41 ports in this commit are shown above. )
Mark all my ports as MAKE_JOBS_SAFE and MAKE_JOBS_UNSAFE
|
|
Wed, 25 Feb 2009
|
[ 11:31 garga ]
- My last commit didn't fix the problem, actually, i was not reproducing it
accordingly, now real fix.
Reported by: Yasuhiro KIMURA <yasu@utahime.org>
|
|
Tue, 24 Feb 2009
|
[ 13:49 garga ]
- Fix REINPLACE_CMD syntax when WITH_AUTHLIB=yes
PR: ports/132040 (based on)
Submitted by: Yasuhiro KIMURA <yasu@utahime.org>
|
|
Wed, 18 Feb 2009
|
[ 07:00 itetcu ]
Add MAILDROP_LOG_COLUMNS which controlls the lenght of the 'File:' line in the
logs. Default it to 72 (like in the sources), which plus the message size gives
80 (= standard # of columns in a terminal). If you watch the logs under X
something like 140 will probably use your screen width more usfully.
Approved by: maintainer
|
|
Mon, 5 Jan 2009
|
[ 21:05 pav ] (Only the first 10 of 31 ports in this commit are shown above. )
- Remove conditional checks for FreeBSD 5.x and older
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 28 Jul 2008
|
[ 11:25 garga ]
- Take maintainership
|
|
Sun, 27 Jul 2008
|
[ 04:30 linimon ] (Only the first 10 of 53 ports in this commit are shown above. )
Reset sergei@ due to maintainer-timeouts and no response to email.
Hat: portmgr
|
|
Wed, 6 Jun 2007
|
[ 01:57 delphij ]
- Update to 2.0.4.
- "WANT_FAM_SYSTEM=fam" might have been too restrictive,
so remove it.
Submitted by: KIMURA Yasuhiro <yasu utahime org>
PR: ports/112201
Approved by: maintainer timeout
|
|
Wed, 21 Mar 2007
|
[ 17:01 sergei ]
- Update to 2.0.3
- Explicitly require fam rather than gamin
PR: ports/110211
Submitted by: KIMURA Yasuhiro (yasu AT utahime DOT org)
|
|
Mon, 29 Jan 2007
|
[ 19:05 gabor ] (Only the first 10 of 42 ports in this commit are shown above. )
Remove USE_GPG from all effected ports. This knob is a no-op and the way it
was supposed to work is useless, because if we can't trust the distfile from
the remote machine, we can't trust the signature from the same machine either.
Our MD5 and SHA256 are good for checking both the sanity and the
trustiness of distfiles.
Approved by: portmgr (erwin), erwin (mentor)
|
|
Tue, 2 May 2006
|
[ 22:54 sergei ]
- Update to 2.0.2
- Install quotawarnmsg.sample file [1]
- Add WITH_FAM knob to explicitly enable optional support for FAM
in addition to autodetecting its presence; utilize USE_FAM for dependency
(choose between devel/gamin and devel/fam according to user's preference)
PR: ports/95169 [1]
Submitted by: Rui Lopes <rgl@ruilopes.com> [1]
|
|
Mon, 26 Dec 2005
|
[ 09:40 edwin ]
[PATCH] mail/maildrop: Update to 2.0.1
Update to latest release version 2.0.1.
PR: ports/90915
Submitted by: KIMURA Yasuhiro <yasu@utahime.org>
|
|
Tue, 26 Apr 2005
|
[ 19:22 oliver ]
chase courier-authlib move
|
[ 13:25 sergei ]
- Add patch to work around the problem where maildrop exits with
"flock() failed" error when an attempting to route messages to /dev/null.
Patch is submitted upstream.
- Bump PORTREVISION
PR: ports/80106
Submitted by: David Lay <dsl@webize.com.au>
|
|
Tue, 12 Apr 2005
|
[ 03:26 obrien ] (Only the first 10 of 773 ports in this commit are shown above. )
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
|
|
Mon, 11 Apr 2005
|
[ 08:04 obrien ] (Only the first 10 of 776 ports in this commit are shown above. )
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
|
|
Mon, 14 Mar 2005
|
[ 14:36 sergei ]
- Fix MAILDROP_SUID/SGID - Maildrop was installed without suid/sgid bit
even if MAILDROP_SUID/MAILDROP_SGID option is set - fixed
NOTE: this changes behavior of these options so that suid/sgid bit
is set only if these options are explicitly specified.
There is no default value for these options now.
- Bump PORTREVISION
PR: ports/78715
Submitted by: KIMURA Yasuhiro <yasu@utahime.org>
|
|
Wed, 9 Mar 2005
|
[ 15:36 lofi ]
Near miss (USE_GMAKE for releases up to and *including* 5.2.1-RELEASE).
|
[ 12:41 sergei ]
- Fix WITH_AUTHLIB=yes case by patching LIBS in Makefile.in [1]
(adds -rpath=${LOCALBASE}/lib/courier-authlib). Unlike the previous
solution (add it to LDFLAGS) this does work
PR: ports/77874
Submitted by: Thomas T. Velhdouse <veldy@veldy.net> (error report)
Obtained from: Douglas Fraser <doug@idmf.net> [1] (actual fix)
|
|
Wed, 2 Mar 2005
|
[ 18:50 lofi ]
make(1) in 5.2.1-RELEASE can't handle the generated Makefiles either.
|
|
Tue, 22 Feb 2005
|
[ 10:08 sergei ]
- Build fails under RELENG_4 unless USE_GMAKE=yes.
Make it conditional on OSVERSION since RELENG_5 and HEAD
does not have that problem
Noticed by: KIMURA Yasuhiro <yasu@utahime.org>
|
Number of commits found: 125 (showing only 100 on this page) |
As an Amazon Associate I earn from qualifying purchases.