| non port: mail/libesmtp/Makefile |
|
SVNWeb
|
Number of commits found: 70 |
|
Sun, 7 May 2023
|
[ 16:03 Po-Chuan Hsieh (sunpoet)  ]    b63c215
mail/libesmtp: Update to 1.1.0
- Update pkg-descr
- Take maintainership
Changes: https://github.com/libesmtp/libESMTP/releases
https://libesmtp.github.io/reference/changes-since-v1.0.6.html
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] b587cc2 (Only the first 10 of 577 ports in this commit are shown above. )
mail: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ashish@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam David <adam@FreeBSD.org>
* Adam McDougall <mcdouga9@egr.msu.edu>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Deiter <tiamat@komi.mts.ru>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alex Perel <veers@disturbed.net> (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 10 Sep 2021
|
[ 21:17 Bernhard Froehlich (decke) ] ca03a61
mail/libesmtp: Add CPE information
Approved by: portmgr (blanket)
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sun, 8 Nov 2020
|
[ 07:52 danfe ]  
Garbage-collect BROKEN_SSL=openssl, this had been fixed in r541412.
Reported by: Brian Gardner
|
|
Tue, 7 Jul 2020
|
[ 11:47 danfe ]
Pull the patch from Gentoo Linux to unbreak the build against contemporary
versions of OpenSSL.
PR: 238133
|
|
Wed, 1 Jan 2020
|
[ 17:27 brnrd ] (Only the first 10 of 28 ports in this commit are shown above. )
Chase rename of security/openssl111
- Categories a-m
MFH: 2020Q1
|
|
Wed, 3 Apr 2019
|
[ 06:24 antoine ]
Mark BROKEN on FreeBSD 12 and 13
Reported by: pkg-fallout
MFH: 2019Q2
|
|
Sat, 10 Nov 2018
|
[ 10:09 mat ] (Only the first 10 of 86 ports in this commit are shown above. )
security/openssl-devel was removed, but there is a security/openssl111 now.
|
|
Sun, 16 Apr 2017
|
[ 11:09 sunpoet ]
Use BROKEN_SSL
|
|
Tue, 29 Nov 2016
|
[ 18:46 mat ] (Only the first 10 of 55 ports in this commit are shown above. )
Mark some ports as not openssl-devel ready.
Sponsored by: Absolight
|
|
Sun, 11 Sep 2016
|
[ 22:53 marino ]
mail/libestmp: FIx build with LibreSSL (deprecated DES methods)
|
|
Sun, 7 Feb 2016
|
[ 11:45 amdmi3 ]
- Clarify LICENSE
- Switch to options helpers
|
|
Thu, 14 May 2015
|
[ 10:15 mat ] (Only the first 10 of 1814 ports in this commit are shown above. )
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 15 Jan 2015
|
[ 09:05 tijl ] (Only the first 10 of 102 ports in this commit are shown above. )
Add missing USE_OPENSSL=yes
PR: 195796
|
|
Sun, 17 Aug 2014
|
[ 16:08 tijl ] (Only the first 10 of 13 ports in this commit are shown above. )
mail/libesmtp:
- Convert to USES=libtool and bump dependent ports
- Use option helpers
- Remove PTHREAD_CFLAGS and PTHREAD_LIBS
- Add INSTALL_TARGET=install-strip
|
|
Tue, 29 Jul 2014
|
[ 18:41 adamw ] (Only the first 10 of 426 ports in this commit are shown above. )
Convert a bunch of USE_BZIP2 to USES=tar:bzip2
Approved by: portmgr (not really, but touches unstaged ports)
|
|
Mon, 7 Jul 2014
|
[ 15:31 olgeni ] (Only the first 10 of 193 ports in this commit are shown above. )
Remove indefinite articles and trailing periods from COMMENT, plus minor
COMMENT typos and surrounding whitespace fixes. A few Makefiles where not
included as they contain Latin-1 characters that break the Phabricator
workflow. Category M.
CR: D306
Approved by: portmgr (bapt)
|
|
Wed, 5 Feb 2014
|
[ 13:45 miwi ] (Only the first 10 of 20 ports in this commit are shown above. )
- Stage support
|
|
Fri, 20 Sep 2013
|
[ 19:59 bapt ] (Only the first 10 of 748 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)
|
|
Wed, 14 Aug 2013
|
[ 22:35 ak ] (Only the first 10 of 1725 ports in this commit are shown above. )
- Remove MAKE_JOBS_SAFE variable
Approved by: portmgr (bdrewery)
|
|
Wed, 13 Jun 2012
|
[ 05:55 bapt ] (Only the first 10 of 16 ports in this commit are shown above. )
Convert to new options framework
|
|
Wed, 23 May 2012
|
[ 01:46 miwi ]
- Update to 1.0.6
PR: 168041
Submitted by: Ports Fury
|
|
Wed, 1 Feb 2012
|
[ 15:53 tabthorpe ] (Only the first 10 of 38 ports in this commit are shown above. )
- Reassign to the heap
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Wed, 29 Dec 2010
|
[ 20:04 pgollucci ] (Only the first 10 of 208 ports in this commit are shown above. )
- DISTNAME= ${PORTNAME}-${PORTVERSION} is the default and not needed.
PR: ports/153292
Submitted by: myself (pgollucci)
Tested by: -exp run by pav
Approved by: portmgr (pav)
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
|
Thu, 28 Feb 2008
|
[ 19:08 mnag ]
- Update two obsolete MASTER_SITES
Notified by: erwinbot
|
|
Sat, 27 Jan 2007
|
[ 06:58 kris ]
Use libtool port instead of included one to avoid objformat a.out botch
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Sat, 31 Dec 2005
|
[ 02:28 mnag ]
Update to 1.0.4 [1]
Add OPTIONS to disable OPENSSL and enable DEBUG
PR: 91109 [1]
Submitted by: Babak Farrokhi <babak@farrokhi.net> [1]
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Fri, 16 Sep 2005
|
[ 17:58 mnag ] (Only the first 10 of 46 ports in this commit are shown above. )
Update my email
Approved by: pav (mentor)
|
|
Mon, 29 Aug 2005
|
[ 06:09 novel ]
Pass maintainership to submitter.
PR: 85416
Submitted by: Marcus Grando <marcus@corp.grupos.com.br>
|
|
Tue, 12 Apr 2005
|
[ 03:26 obrien ] (Only the first 10 of 773 ports in this commit are shown above. )
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
|
|
Mon, 11 Apr 2005
|
[ 08:04 obrien ] (Only the first 10 of 776 ports in this commit are shown above. )
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
|
|
Sun, 13 Feb 2005
|
[ 18:28 linimon ] (Only the first 10 of 33 ports in this commit are shown above. )
With portmgr hat on, reset maintainership of these ports. Maintainer's
old email address bounces, and he has not been responsive to email on the
only other one we have for him.
These ports are now available for adoption.
Come back coop, we miss ya ...
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Thu, 8 Jul 2004
|
[ 21:31 pav ]
- Update to 1.0.3
PR: ports/68761
Submitted by: John Merryweather Cooper <johnmary@adelphia.net> (maintainer)
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Wed, 4 Feb 2004
|
[ 05:10 marcus ] (Only the first 10 of 1422 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
|
|
Sun, 18 Jan 2004
|
[ 21:06 clement ]
- Add memrchr().
- Maintainer informed.
Requested by: many
|
[ 11:47 clement ]
s/memrchr/memchr/.
It fixes an 'undefined reference to `memrchr''.
Approved by: maintainer
Approved by: erwin (mentor) (implicitly)
|
|
Fri, 16 Jan 2004
|
[ 18:30 marcus ]
Update to 1.0.2.
* patch applied to smtp-tls.c and examples/mail-file.c for Balsa
* smtp-tls.c
- fixed typo in check_file()
- domain name check is now done using the wildcard match per RFC 2818
- better error reporting for check_file() and check_directory()
PR: 61434
Submitted by: maintainer
|
|
Sat, 1 Nov 2003
|
[ 13:57 sergei ]
- Update to 1.0.1 (a minor bug fix) [1]
While I'm here [2]
- Install additional documentation
- Always install examples (useful even when NOPORTDOCS defined)
- Define CONFIGURE_TARGET to silence configure warning
- Use EXAMPLESDIR macro in pkg-plist
PR: 58796 [1]
Submitted by: maintainer [1], sergei [2]
|
|
Fri, 21 Feb 2003
|
[ 12:42 knu ] (Only the first 10 of 199 ports in this commit are shown above. )
De-pkg-comment.
|
|
Sun, 19 Jan 2003
|
[ 19:22 marcus ]
* Do not explicitly link against libc
* Do not install module .a files
Approved by: maintainer
|
|
Mon, 18 Nov 2002
|
[ 03:02 marcus ]
Add a missing build dependency on Perl.
PR: 45380
Submitted by: maintainer
|
|
Sat, 16 Nov 2002
|
[ 14:14 edwin ]
Maintainer update to version 1.0
PR: ports/45299
Submitted by: John Merryweather Cooper <coop9211@uidaho.edu>
|
|
Sun, 25 Aug 2002
|
[ 03:12 marcus ]
Update to 1.0rc1. This includes a minor ABI change as well as improved
performance.
PR: 41985
Submitted by: maintainer
|
|
Wed, 13 Mar 2002
|
[ 00:25 ade ]
Update to 0.8.11
PR: 35583
Submitted by: MAINTAINER
|
|
Wed, 13 Feb 2002
|
[ 04:44 ade ]
Update to 0.8.10p1
|
|
Tue, 22 Jan 2002
|
[ 16:43 tobez ]
Update to 0.8.9.
|
|
Wed, 12 Dec 2001
|
[ 19:43 ijliao ]
upgrade to 0.8.8
|
|
Sun, 18 Nov 2001
|
[ 22:48 tobez ]
Update to 0.8.7.
|
|
Tue, 30 Oct 2001
|
[ 21:59 tobez ]
Prepare this port to the forthcoming autoconf-2.52.
|
|
Sat, 20 Oct 2001
|
[ 14:15 ijliao ]
Fix Null-Pointer Dereference causing SEGV
|
|
Thu, 18 Oct 2001
|
[ 12:33 tobez ]
Update to 0.8.6.
|
|
Wed, 15 Aug 2001
|
[ 21:02 tobez ]
Update mail/libesmtp to 0.8.4.
|
|
Mon, 30 Jul 2001
|
[ 13:05 tobez ]
Remove libtool-based "nit" in build.log to silence complaints about
discovering libtool files after building/installing. Correct a punctuation
error in a comment.
|
|
Fri, 20 Jul 2001
|
[ 10:58 sobomax ]
- Don't infect user's system with totally useless .la files; - remove
USE_LIBTOOL (which is nop in this case) and associated patches that "make"
it work; - add missed USE_OPENSSL.
|
[ 10:32 sobomax ]
Remove bogus comment.
|
|
Sat, 14 Jul 2001
|
[ 22:51 tobez ]
Forgotten in previous commit:
|
[ 22:38 tobez ]
Upgrade mail/libesmtp to 0.8.3.
|
|
Tue, 12 Jun 2001
|
[ 20:25 tobez ] (Only the first 10 of 125 ports in this commit are shown above. )
Updated MAINTAINER to my new committer email address. Do the same for
pkg-descr files.
|
|
Wed, 7 Mar 2001
|
[ 10:52 roam ]
Add libesmtp, a library for sending email messages via SMTP.
|
Number of commits found: 70 |
As an Amazon Associate I earn from qualifying purchases.