Instrument a facility for including wishlist patches if WITH_WISHLIST
is defined.

Kick off with Exim 4 wish list item #163, which allows suppression of
the Received header if received_header_text is empty.

PR:             ports/53432
Submitted by:   Oliver Eikemeier <eikemeier@fillmore-labs.com>

1) Update exiscan-acl patch to -09:
   Improved clamd support.
   New FAQ/example documentation.

2) Enable wildlsearch lookups by default and add new
   WITHOUT_WILDLSEARCH knob for disabling them.

3) Issue a fat warning if 127.0.0.1 is found in the relay_from_hosts
   hostlist of an existing configure file on upgrade.  This is important
   for IPv6 users and doesn't hurt IPv4-only users.

4) Attempt local deliveries as the owner of the mailbox (still group
   mail) and don't fail if the existing mailbox permissions are narrower
   than those with which we would have created it.  This works around
   pw(8) creating mailboxes with 0600 permission (instead of 0660).

Typo fixes.

* Update to exiscan-acl patch 08, which fixes wrong defaults for sophie
  antivirus and adds clamd support.

* Use the bz2 patch for exiscan-acl.

* Add a CVS Id tag to exim.sh
  Add a reload command to exim.sh.

Bump PORTREVISION accordingly.

Submitted by:   Oliver Eikemeier <eikemeier@fillmore-labs.com>

Enable client-side Microsoft "Secure Password Authentication" SMTP AUTH
support by default and provide the WITHOUT_AUTH_SPA knob to turn it off.

Adds 11KB to the installed binary and requires configuration changes to
enable, so it seems a harmless addition to the default feature set.

Bump PORTREVISION accordingly.

Submitted by:   Oliver Eikemeier <eikemeier@fillmore-labs.com>

Update to exiscan-acl-4.20-07, which handles blank lines in reports from
p5-Mail-SpamAssassin-2.54.

Submitted:      Oliver Eikemeier <eikemeier@fillmore-labs.com>

Update to exiscan-acl-4.20-06, which fixes a problem handling multiple
messages on one SMTP connection.

Again, no PORTREVISION bump, because WITH_EXISCAN_ACL is not the default.

If I get hit by a bus, please hand this port over to the submitter.

Submitted by:   Oliver Eikemeier <eikemeier@fillmore-labs.com>

Previous delta lost the checksum for exim/exiscan-4.20-26.tar.bz2.
Never use the makesum target to update distinfo for ports with
conditional distfiles and patches.

Update to exiscan-acl-4.20-04.

PORTREVISION has not been bumped, because WITH_EXISCAN_ACL is not the
default case.

* Update to exim-4.20, featuring host of minor bugfixes and some feature
  enhancements.  Non-critical upgrade.
* Distribution site fixes and cleanups (somehow ommitted in prev delta).
* Put distribution files in a subdirectory.
* Optional support for exiscan-acl; exiscan is still the default.

I think the submitter is doing a great job.

PR:             ports/52228
Submitted by:   Oliver Eikemeier <eikemeier@fillmore-labs.com>

* Distribution site fixes and cleanups.
* Add support for db41.
* Fix bug in check_dir_size.
* Fix obscure bug in address rewriting.
* Rename patch-src::auths::plantext.c to ...::plaintext.c, without a
  repo-copy.
* Fix for unqualified redirection addresses prefixed with '\'.

Bump PORTREVISION accordingly.

PR:             ports/50984, ports/51279, ports/51300
Submitted by:   Oliver Eikemeier <eikemeier@fillmore-labs.com>

1) Fix reproducible plaintext authentication crash.

2) In the sample configuration file, allow relaying from the IPv6 and
   IPv4 localhost addresses.

   This fixes relaying problems for folks using things like IPv6-enabled
   mailman.

Bump PORTREVISION accordingly.

Reported by:    Alexander Sabourenkov <lxnt@caravan.ru> (1)
                Mark Edwards <mark@antsclimbtree.com> (2)

* Update exim-4.12 -> exim-4.14:

  This is a maintenance release, but there are a few edge cases where
  backward compatibikity in the configure file was broken.

  While upgrading is recommended, administrators are encouraged to
  Update exim-4.12 -> exim-4.14:

  This is a maintenance release, but there are a few edge cases where
  backward compatibikity in the configure file was broken.

  While upgrading is recommended, administrators are encouraged to
  examine the README.UPDATING file in the distribution.

* Catch up to changes in the ports tree with respect to available
  OpenLDAP releases.  While backward compatibility is preserved,
  administrators may use WITH_OPENLDAP1, WITH_OPENLDAP20 and
  WITH_OPENLDAP21 for more fine-grained control of the OpenLDAP
  release on which to depend.

Submitted by:   Oliver Eikemeier <eikemeier@fillmore-labs.com>

Fix the DB_LIB_VERSION=4 case.

Reported by:    Andrew Filonov <aef@antar.bryansk.ru>
Approved by:    portmgr

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Update to exiscan patch -25, which fixes a crash bug handling single-part
base64 mime messages, introduced in patch -24.

Bump PORTREVISION accordingly.

Update exiscan patch to -24, to catch up with the protocol change in
p5-Mail-SpamAssassin-2.50.

That port update may have been ill-advised so close to a ports freeze,
but this new version of the exiscan patch is backward compatible to
the original protocol, so if the maintainer of p5-Mail-SpamAssassin
rolls back, this port will not require a change.

Bump PORTREVISION accordingly.

Requested by:   "David Haworth" <dave@fyonn.net>

Point dependencies on net/openldap2 to net/openldap20

Point dependencies on net/openldap to net/openldap12

* Update to exiscan-4.12-23a:

  + Reverts non-backward compatible change in output handling of
    CLI AV scanners.

  + Makes a number of options expandable, allowing lookups to determine
    their values.

  + Fixes various edge case bugs.

  + Adds MKS AV daemon support.

* Bump PORTREVISION accordingly.

Warn folks who actually turn Exiscan on about its tendency to not
preserve backward compatibility across upgrades.

(null delta)

Previous delta was:

Obtained from:  author
Message-ID:     <Pine.SOL.4.44.0212181142130.23666-100000@draco.cus.cam.ac.uk>

1) Update to exiscan-4.12-22, which closes a number of buffer overflows
   and incorporates a lot of fixes.

   WARNING, this version of exiscan is not entirely backward-compatible
   with the previous one:

   *    The following configuration options have been replaced with
        compile-time definitions and thus must be removed from your
        Exim configure file if specified there:

        exiscan_spamd_buffer_max_chunks
        exiscan_spamd_buffer_init_chunk
        exiscan_av_buffer_max_chunks
        exiscan_av_buffer_init_chunk

Do not create missing DB hints files for read-only operations on them;
simply fail the lookup.

This prevents Exim from creating hints files that it can't use when
its DBM method is DB 1.85 (the default).

Obtained from:  author

Update 4.10 -> 4.12:

For Exim, this includes an enormous number of fixes.  Most of these are
for esoteric configurations, although if you're bitten by them, you're
bitten hard.

The fixes also include closing up a buffer overflow that is not believed
to be exploitable, and a format string vulnerability that was only
exploitable by an Exim admin user, but then provided root access.

For Eximon, this just rationalizes a patch we carried locally for ages.

Chase libpq version bump.

PERL -> REINPLACE
And some ports have USE_PERL5=yes now.

Update to rev 16 of the exiscan patch (exiscan-4.10-16).  The maintainer
has graciously agreed to make a bzip2 version of the exiscan distfile
available, so use that instead of the gzip version.  This allows
us to remove the post-patch target and associated rubbish.

Bump PORTREVISION accordingly.

1) Enable directory-search lookups by default and provide
   WITHOUT_DSEARCH to disable them.

2) Enable NIS lookups by default and provide WITHOUT_NIS to
   disable them.

3) Bump PORTREVISION accordingly.

Submitted by:   Matthew Byng-Maddick <mbm+freebsd@colondot.net> (1)
Requested by:   Nicolas Kowalski <Nicolas.Kowalski@imag.fr> (2)

Fix plist and unbreak packaging.

Submitted by:   bento

Mention mail/p5-Mail-SpamAssassin and security/vscan.

Requested by:   Tony Finch <dot@dotat.at>

Enable exiscan content scanning unless the new knob WITHOUT_EXISCAN
is defined.

Bump PORTREVISION accordingly.

Enable exiscan content scanning unless the new knob WITHOUT_EXISCAN
is defined.

Bump PORTREVISION accordingly.

Enable IPV6 unless WITHOUT_IPV6 is defined.

Fix LDAP lookup type selection.

Reported by:    Adam Doligalski <adam.doligalski@atm.com.pl>

I agree with the Exim community that the exim-4.xx has reached production
quality.

Move exim to exim-old for folks who need exim-3.xx, because the
configuration file for exim-4.xx is not backward compatible.  Move
exim-devel to exim, removing NO_LATEST_LINK:

        repo-copy       exim            -> exim-old
        copy over       exim-devel      -> exim
        retire          exim-devel

Slave ports are intended for use with the exim port, as before, so they
now build and install for exim-4.xx.

Revert rev 1.109 of Makefile.  Given the likelihood of future changes
in the configuration affecting the base system's MTA, the management
of multiple POST-INSTALL-NOTES files could easily become a nightmare.

Instead, use a single POST-INSTALL-NOTES file that includes instructions
that, at worst, suggest unnecessary but harmless changes.

While here, use bullets instead of a numbered list for the notes, so
that future deltas are easier to read.

Also, mention the 'daily_status_include_submit_mailq' periodic.conf(5)
knob, as reported in PR ports/38925.

PR:             ports/38925
Submitted by:   Pat Lashley <patl+freebsd@phoenix.volant.org>

Update to exim-3.36:

* Incorporates some patches.

* Fix pretty obscure queue handling bug.

* Update exim-4 spool file format forward-compatibility.

Fix pkg-list following the move from exim.sh.sample to exim.sh.

Bump PORTREVISION to reflect the whole rc.d startup change and
the "NULLs in message body as exposed to filters" patch.

Gracefully handle NULLs in the message body as exposed to filters,
by replacing them with spaces.

This is a vendor-sanctioned patch, obtained from the exim-users
mailing list.

Cope with -CURRENT's new tri-state sendmail_enable rc.conf(5) variable
by using an rc.d script to launch Exim, as was done before I took over
this port.

This seems to be the most popular approach, and is arguably the
simplest.  Folks like me who attach some aesthetic value to using rc(8)
and mailer.conf(8) to launch Exim at startup time should know enough to
blow away the rc.d script and do things any way they please.

For now, use two versions of the POST-INSTALL-NOTES, the only
difference being that the one given to -CURRENT users suggests setting
sendmail_enable to 'NONE', while the one for -STABLE users suggests
'NO'.

Fix the build in the WITH_PGSQL=yes case.

When the databases/postgresql7 port was updated from postgresql-7.1.x to
postgresql-7.2, libpq-fe.h moved from PREFIX/include/pgsql to
PREFIX/include for reasons I can't figure out.

This applies a band-aid until I can get clarification from the postgresql
port maintainer <girgen@partitur.se>, but I think the port might be
"broken" in its placement of some header files.

Reported by:    kris

Include my preferred work-around, which is to add the library paths   of problem
packages to ldconfig_paths in rc.conf(5).    

Cope with the fact that at least one 3rd-party package against which   Exim may
be linked (MySQL) uses a startup script to add its library   path to the linker
hints.    

Update to exim-3.35:    

Enable the LMTP transport by default and provide a knob for disabling   it. 
There are just too many people who need this for "black box"   POP3/IMAP
services to justify the bytes saved in the default package.    

Expand on the existing documentation regarding TLS and certificates,   adding
information important to operators of SMTP services used   by a number of
Windows (and probably Unix) MUA packages.    

Update to exim-3.34:    

Search for the mailnull user quietly (grep -q).    

Build Exim with compile-time defaults for exim_user and exim_group.   Use the
newly added mailnull user, and the now well-established group   mail.    

Bump PORTREVISION for this recent change:    

Build Exim with compile-time defaults for exim_user and exim_group.   Use the
newly added mailnull user, and the now well-established group   mail.    

Stop people complaining about the absence of plain text versions of   the
documentation by installing them.    

Catch up with the location of the distfile on the master site and   mirrors. 
The exim-3.x distribution has been moved into exim3   in preparation for the
advent of exim-4.x.    

Add the author's patch to fix bad handling of a disk space shortage   on
pipeline input.    

Add the author's patch to fix a failure to reap children on BSD systems,   where
SIG_IGN as the signal handler for SIGCHLD is bad.  This is only   an issue when
a significant number of messages is received via pipe   (e.g. with -bS) at a
faster rate than they can be dealt with by parallel   delivery agents (e.g.
-odqs).    

Add the author's patch to fix broken handling of queue_list_requires_admin   and
the -bpc flag.    

Fix the message_body_size filter variable bug reported by Phil Chambers   to the
exim-users mailing list on 2001-09-19 using the patch posted to   the list by
the author on 2001-09-24.    

Fix inversion in NOPORTDOCS test introduced in previous delta.    

* Drop deprecated USE_PERL5.    

* Break eximon into its own port.  The goal is to allow administrators     to
install and use Exim from the packages without having to install     XFree86.   

* Update to exim-3.33:    

Update to exim-3.32:    

Apply the author's fix for socket binding in the case where  
net.inet6.ip6.v6only is set.  This sysctl disables AF_INET6 wildcard   listeners
from accepting IPv4 traffic.    

Too many people have complained about my choice of MTA user (sendmail).   Bite
the bullet _now_ and use MTA user exim instead.  This means that   only early
adopters of Exim-3.31 are affected, rather than lots more   folks further down
the line.    

Fix the IPv6 bind() call properly.  The author didn't spot the flaw   in my
patch when I initially submitted it.  This is his fully tested   version.    

(forced commit)    

Make the purpose of WITHOUT_X11 clearer, based on feedback from several   users.
   

Clarify that the steps involving mailwrapper(8) don't replace the a   sendmail
installation, but cause exim to be run instead of sendmail on   startup.    

Fixes for building with LDAP lookup support:    

Suggest the use of newsyslog(8) for log rotation.  The exicyclog   utility
supplied with Exim is intended for systems that don't have   something as nifty
as newsyslog(8).    

Update to exim-3.31:    

Catch up with the new postgresql7 layout scheme introduced in   rev 1.75 of
ports/databases/postgresql7 in April this year.    

The commented RBL stuff in configure.default was not updated as   expected in
exim-3.30 release.  Apply a patch from the author,   which will be included in
exim-3.31 if such a release ever occurs.    

Fix a buffer overflow introduced in 3.30.  This patch will be adopted   in 3.31.
:-)  

Fix some breakage in the section on expansion variables.  This wasn't  
submitted to Philip in time for exim-3.30's release, and a new   version of the
documentation is unlikely until exim-4.00.  

Update 3.22 -> 3.30:    

Bump PORTREVISION to reflect the change made in rev 1.84 (exim.sh   retired, use
mailwrapper(8) instead).    

Exim is a drop-in replacement for sendmail.  Since 4.1-RELEASE,   FreeBSD has
shipped with mailwrapper(8), which facilitates the use of   drop-in replacements
for sendmail.  Retire exim.sh in favour of the   mailwrapper(8) approach.    

Calling makeinfo with --no-validate hasn't been necessary for ages.    

Rename patch-scripts::exim_install to patch-aa without a repo-copy.   A
continuum in the history for this file isn't necessary.  What _is_   important
is the purpose of the patch today:    

Retire our local copy of configure.default, which is a maintenance pain.    

Install the Exim info files with more useful names.  Before, the command  
``info exim'' would fail to descend into any of the 3 Exim info files   from the
dir top branch.    

* Add a WITH_IPV6 knob.  Exim breaks if compiled with IPv6 support and     run
with a kernel that has had IPv6 ommitted from its configuration,     so I can't
make this a default (yet).    

Apply officially sanctioned patch to close a format string vulnerability   in
exim batch SMTP mode.    

Retire the local copy of exim_monitor/EDITME from the port, since it   is simply
the original with the defaults uncommented and unchanged.    

Strip binaries.  

Enable CDB-style lookups by default and provide a knob for disabling   this
support.    

Fix a typo that should have been corrected in the previous commit. :-(    

Fix typo in previous commit.    

Sandbox Exim.    

The previous revision should have bumped PORTREVISION.  Do so now.    

Don't link against libssl and libcrypto when TLS support is disabled.    

Finally remove the bastardized local copy of EDITME (called   files/Makefile)
that's been a maintenance PITA for too long.  Replace it   with a patch against
EDITME, now that the sed rules that operate on it   are mostly sensible.    

Fix sed expression in previous (untested) commit.    

When WITH_TCP_WRAPPERS is not defined, actually remove the XX_ cruft   from
EXTRALIBS.    

Use the standard ports mechanism for enabling and disabling features:    

Prevent sed rules from messing with real comments, instead of the   commented
out make values that they are supposed to operate on.    

Bump PORTREVISION to reflect the significant changes made in the default  
feature set today.    

Fix the embedded Perl interpreter hook.