| non port: lang/ocaml/Makefile |
|
SVNWeb
|
Number of commits found: 135 (showing only 100 on this page) |
|
Sun, 9 Apr 2023
|
[ 13:37 Po-Chuan Hsieh (sunpoet)  ]    f2002c5
lang/ocaml: Mark PIE_UNSAFE
Approved by: portmgr (blanket)
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] f98ae56 (Only the first 10 of 255 ports in this commit are shown above. )
lang: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Dupre <ale@FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alonso Cardenas Marquez <acm@FreeBSD.org>
* Andreas Klemm <andreas@klemm.gtn.com>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Andrey Zakhvatov
* Anton Berezin <tobez@FreeBSD.org>
* Anton Berezin <tobez@tobez.org> (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 27 Apr 2022
|
[ 13:21 Piotr Kubaj (pkubaj) ] 0e4708c
lang/ocaml: simplify powerpc* handling
|
|
Mon, 25 Apr 2022
|
[ 14:12 Piotr Kubaj (pkubaj) ] a0bf3b4
lang/ocaml: switch to clang + bfd on powerpc64
|
|
Fri, 22 Apr 2022
|
[ 10:47 Alexey Dokuchaev (danfe) ] 33ae546
lang/ocaml: simplify handling of the documentation distfiles
- Make use of the options helper, DOCS_DISTFILES, and get rid of the
poorly readable .if ${PORT_OPTIONS:MDOCS} block
- Drop useless `post-extract' target, all needed files are extracted
automagically by the framework
- GC left-over CMP_LIB_DESC, MODOPT, PATTERN, and DOCSDISTNAME knobs
|
|
Tue, 19 Apr 2022
|
[ 12:09 Piotr Kubaj (pkubaj) ] 3d1ba1a
lang/ocaml: use LLD_UNSAFE instead of USE_GCC on powerpc64le
|
[ 08:58 Mikael Urankar (mikael) ] 59a8bea
lang/ocaml: Unbreak on aarch64
Enable profiling on aarch64
Approved by: portmgr (build fix blanket)
|
|
Sat, 16 Apr 2022
|
[ 07:19 Alexey Dokuchaev (danfe) ] 317aa04 (Only the first 10 of 27 ports in this commit are shown above. )
OCaml: transient update of the stack to version 4.07.1
This is the first step in modernizing our OCaml ports infrastructure,
as we had accumulated substantial technical debt over the years when
many of its consumer ports had not received proper care and updates.
It is currently considered as the lowest supported version (baseline)
in majority of open-source OCaml projects, which would help to pull
up other ports, e.g. `devel/ocaml-dune' in smaller, manageable pieces.
For conservative hackers among us and for compatibility with RHEL 8
which is also on it, having 4.07 in the tree would allow users stick
to that package (pkg lock it) if needed.
PR: 250408, 262781
Exp-run by: antoine
|
|
Fri, 29 Oct 2021
|
[ 10:05 Stefan Eßer (se) ] 4009f9a
lang/ocaml: Remove redundant '-[0-9]*' from CONFLICTS
Follow-up to previous commit: one occurance of "-[0-9]*" had been
missed.
Approved by: portmgr (blanket)
|
[ 09:50 Stefan Eßer (se) ] 819f25b (Only the first 10 of 388 ports in this commit are shown above. )
*/*: Remove redundant '-[0-9]*' from CONFLICTS
The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").
Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".
Approved by: portmgr (blanket)
|
|
Fri, 3 Sep 2021
|
[ 13:01 Tobias Kortkamp (tobik) ] 310623b (Only the first 10 of 17 ports in this commit are shown above. )
*: Clean up some things
- Fix typos
- Remove duplicate variables
- Remove nop or unreferenced variables
- Add missing ports to the build
- Clean up commented PORTREVISION
- Add missing USES
Reported by: portscan
|
|
Mon, 30 Aug 2021
|
[ 11:44 Alexey Dokuchaev (danfe) ] 4088a57
lang/ocaml: sort pkg-plist correctly, remove some old cruft
- Sort the *flat* pkg-plist (after the PLIST_SUB expansion), and drop
needless ``@dir lib/ocaml/threads'' entry
- Remove "INSTALL* safeness" gimmick which had been added 16 years ago
in r133975 and supposedly helped to preserve correct permissions in
some circumstances, but these days it erroneously removes executable
bits from some binaries, or causes nothing but stage Q/A warnings
|
|
Thu, 10 Jun 2021
|
[ 18:29 Piotr Kubaj (pkubaj) ] 0a52b6a
lang/ocaml: fix build on powerpc
Use ld.bfd:
ld: error: can't create dynamic relocation R_PPC_ADDR16_LO against symbol:
caml_last_return_address in readonly segment; recompile object files with -fPIC
or pass '-Wl,-z,notext' to allow text relocations in the output
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 26 Mar 2021
|
[ 02:05 pkubaj ]  
lang/ocaml: fix packaging on armv6
pkg-static: Unable to access file
/wrkdirs/usr/ports/lang/ocaml/work/stage/usr/local/lib/ocaml/raw_spacetime_lib.a:No
such file or directory
pkg-static: Unable to access file
/wrkdirs/usr/ports/lang/ocaml/work/stage/usr/local/lib/ocaml/raw_spacetime_lib.cma:No
such file or directory
pkg-static: Unable to access file
/wrkdirs/usr/ports/lang/ocaml/work/stage/usr/local/lib/ocaml/raw_spacetime_lib.cmi:No
such file or directory
pkg-static: Unable to access file
/wrkdirs/usr/ports/lang/ocaml/work/stage/usr/local/lib/ocaml/raw_spacetime_lib.cmx:No
such file or directory
pkg-static: Unable to access file
/wrkdirs/usr/ports/lang/ocaml/work/stage/usr/local/lib/ocaml/raw_spacetime_lib.cmxa:No
such file or directory
pkg-static: Unable to access file
/wrkdirs/usr/ports/lang/ocaml/work/stage/usr/local/lib/ocaml/raw_spacetime_lib.cmxs:No
such file or directory
pkg-static: Unable to access file
/wrkdirs/usr/ports/lang/ocaml/work/stage/usr/local/lib/ocaml/raw_spacetime_lib.mli:No
such file or directory
|
|
Mon, 1 Mar 2021
|
[ 21:09 pkubaj ]
lang/ocaml: fix build on armv6
Same issue as on armv7.
MFH: 2021Q1
|
|
Sun, 3 Jan 2021
|
[ 14:34 pkubaj ]
lang/ocaml: fix build on powerpc64le
Use GCC, like on powerpc64 and add powerpc64le entry to configure script.
Approved by: tier 2 blanket
|
|
Sat, 2 Jan 2021
|
[ 01:46 linimon ] (Only the first 10 of 34 ports in this commit are shown above. )
For ports on riscv64 that fail the same (or similar ways) to aarch64, mark
them BROKEN.
While here, pet portlint (Makevar order).
Approved by: portmgr (tier-2 blanket)
|
|
Fri, 29 May 2020
|
[ 11:27 antoine ]
ocaml depends on as(1) at runtime
PR: 205250
|
[ 00:20 emaste ]
lang/ocaml: add BUILD_DEPENDS as:devel/binutils
/usr/bin/as will soon be removed from the FreeBSD base system, for
FreeBSD 13.0.
Depend on as (not ${LOCALBASE}/bin/as) so that this will introduce no
change for existing 11.x and 12.x, which will continue to use the base
system GNU as 2.17.50.
PR: 205250
Approved by: portmgr (blanket)
Sponsored by: The FreeBSD Foundation
|
|
Mon, 16 Dec 2019
|
[ 12:56 pkubaj ]
lang/ocaml: fix build on powerpc64 elfv2
LLVM miscompiles ocaml on powerpc64 elfv2:
ld: error: bytecomp/printlambda.ml:23:(.text+0x16): relocation R_PPC64_TOC16_DS
out of range: 73024 is not in [-32768, 32767]
Use GCC instead on powerpc64.
Add a conditional patch enabled only on powerpc64 elfv2 to use elfv2 abi instead
of elfv1.
Add a bunch of other patches to correctly check for abi instead of relying on
endianness.
PR: 242389
Approved by: michipili@gmail.com (maintainer)
|
|
Wed, 6 Nov 2019
|
[ 18:06 zeising ] (Only the first 10 of 16 ports in this commit are shown above. )
Add USES=xorg USES=gl, ports categories l
Add USES=xorg and USES=gl to ports in categories starting with 'l'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
|
|
Thu, 1 Aug 2019
|
[ 19:30 pkubaj ]
lang/ocaml: fix build on armv7
armv7 requires -Wl,-znotext in LDFLAGS (same as i386), added definition for
triple target and include term.h in the test for tgetent.
PR: 239157
Approved by: michipili@gmail.com (maintainer timeout), tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D21085
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Fri, 12 Jul 2019
|
[ 09:09 pkubaj ]
lang/ocaml: fix on powerpc64
powerpc64 needs to be put to configure script to be recognized.
PR: 238788
Approved by: michipili@gmail.com (maintainer timeout), tcberner (mat)
Differential Revision: https://reviews.freebsd.org/D20891
|
|
Mon, 24 Jun 2019
|
[ 10:14 danfe ] (Only the first 10 of 56 ports in this commit are shown above. )
Update OCaml to version 4.05.0 (this is the last version where strings
are unsafe by default, which is the main motivation why it was picked,
but not the very latest one) and synchronize the rest of the stack and
dependent ports with it, particularly:
- Update `devel/ocaml-ocamlbuild' to version 0.14.0 and unbreak,
register build dependency on all ports that require it (should
be part of USE_OCAML, but we do not want to make any Mk-related
changes the for time being)
- Update `devel/ocaml-camlp4' to version 4.05+2
- Update `devel/ocaml-camlp5' to version 7.07 (the project had
moved to GitHub)
- Mark `devel/ocaml-deriving-ocsigen' as BROKEN for now, it is
very outdated and requires quite a lot of work
- Update `x11-toolkits/ocaml-labltk' to version 8.06.3
PR: 218333
Exp-run by: antoine
|
|
Tue, 8 Jan 2019
|
[ 13:19 tobik ]
Do not set PORTDOCS twice
|
|
Tue, 18 Sep 2018
|
[ 16:05 emaste ]
lang/ocaml: add -znotext to LDFLAGS on i386, for lld
Example error:
/usr/bin/ld: error: can't create dynamic relocation R_386_32 against
symbol: caml_last_return_address in readonly segment; recompile
object files with -fPIC
This port links some non-PIC code, which fails with lld as it defaults
to disallowing relocations against read-only segments. For i386 we can
just add -znotext unconditionally: for GNU BFD ld it just affirms BFD's
existing default.
PR: 214864, 230209
Approved by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17200
|
|
Mon, 18 Dec 2017
|
[ 14:48 danfe ]
Further pre-update cleanups for `lang/ocaml':
- Do not suppress .bak-files when patching things with ``sed(1) -i'',
those can be useful for debugging and catching no-ops
- Drop `files/manfiles', it is no longer used (looks like a relic from
pre-staging times)
- Do not pass ``-as "${AS} ${ASFLAGS}"'' in the initial CONFIGURE_ARGS:
when ARM support was added in r361233, appropriate values are passed
conditionally (subject to ${ARCH}), see line 69
- Simplify handling of CFLAGS (obtained from RedHat package): rather
than passing them as part of the compiler and "fixing" one generated
Makefile in `post-configure', teach the configure script about them
|
[ 06:55 danfe ]
In sight of long-overdue update of `lang/ocaml', start cleaning things up:
- Remove hunks from `patch-configure' that are irrelevant on *BSD
- Do not aggressively edit configure script in `post-patch', especially
when it is not required (e.g. no variables are expanded). This was
the reason for bogus changes committed in r403835 by wen@ and r403898
by marino@ (cf. "$bytecclinkopts $bytecclinkopts $bytecclinkopts");
now ``make makepatch'' command is idempotent again
- Do not needlessly pass STAGEDIR via MAKE_ENV: it is correctly passed
via MAKE_ARGS (as DESTDIR), and OCaml's build system is aware of it,
while nowhere referencing STAGEDIR variable
- Drop permission fix for ld.conf that was added in r169472 by itetcu@
11 years 4 months ago: it is no-op these days
Build logs remain identical (modulo the whitespace), regression tests pass.
|
[ 01:42 danfe ]
Actualize BROKEN_sparc64 statement. It was (re)marked broken last time in
r138465 by mi@ (first time in r109062 by kris@), that's 12.5 years ago, and
never revisited ever since (except minor facelifting in r387855 by marino@).
The world was largely different back then, with GCC 3.4.4 and OCaml 3.08.3.
Currently it does not build on 10.4-STABLE running under QEMU 2.9.0.
While here, remove stale comment about hardcoded GCC for depend target that
was added in r292093 by bf@ and later *not* removed in r385012 by marino@
together with in-place editing commands it was attributed to. I messed up
the history with r456400, thinking it still applies yet not performing the
proper archaeology check, and rightfully deserve a pointy hat for that.
|
|
Fri, 15 Dec 2017
|
[ 15:31 danfe ]
First step to unbreak `lang/ocaml' on aarch64: teach configure script that
the architecture exists on FreeBSD. Unfortunately, this is not enough for
build to succeed, it now complains that as(1) is not found:
../boot/ocamlrun ../ocamlopt -strict-sequence -w +33..39 -g -warn-error A
-bin-annot -nostdlib -safe-string `./Compflags camlinternalFormatBasics.cmx`
-c camlinternalFormatBasics.ml
sh: as: not found
File "camlinternalFormatBasics.ml", line 1:
Error: Assembler error, input left in file /tmp/camlasm4329ae.s
gmake[7]: *** [Makefile.shared:84: camlinternalFormatBasics.cmx] Error 2
Developed on: ref11-aarch64.freebsd.org
|
[ 15:15 danfe ]
Improve handling of the system architecture in `lang/ocaml'.
OCaml is using ARCH variable throughout its makefiles, which clashes with
our own variable of the same name. To workaround it, OCAML_ARCH variable
was introduced which is set based on ARCH, and makefiles later patched in
the `post-configure' target.
This approach does not scale well with porting OCaml to new architectures
as being fragile and sometimes making the build non-idempotent under some
circumstances.
Instead of "fixing" makefiles post-configure, rename ARCH to SYSTEM_ARCH:
this avoids the clash altogether and lets configure script to set correct
values for supported architectures in the first place with no adjustments
required afterwards.
Tested on: i386, amd64, powerpc
|
|
Thu, 30 Nov 2017
|
[ 07:27 linimon ]
Attempt to build on armv7 by generalizing from armv6 code.
Unfortanately it didn't build for me on armv7: perhaps it is a difference
in compiler. (It currently builds on armv6 on the freebsd.org cluster.)
So, this is a necessary but insufficient step.
Approved by: portmgr (tier-2 blanket)
|
|
Sat, 29 Apr 2017
|
[ 05:44 linimon ] (Only the first 10 of 14 ports in this commit are shown above. )
Provide more descriptive error messages for ports failing on powerpc64.
Approved by: portmgr (tier-2 blanket)
|
|
Fri, 21 Oct 2016
|
[ 12:51 mat ] (Only the first 10 of 718 ports in this commit are shown above. )
${RM} already has -f.
PR: 213570
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
|
|
Wed, 12 Oct 2016
|
[ 02:40 linimon ]
Mark as broken on aarch64.
Approved by: portmgr (tier-2 blanket)
|
|
Thu, 21 Apr 2016
|
[ 16:43 swills ] (Only the first 10 of 419 ports in this commit are shown above. )
many ports: mark broken on powerpc64
|
|
Thu, 24 Mar 2016
|
[ 20:55 madpilot ]
Fix packaging on armv6 by enabling profiling libraries.
PR: 206615
Submitted by: mikael.urankar at gmail.com
Approved by: michipili at gmail.com (maintainer)
|
|
Wed, 16 Dec 2015
|
[ 03:31 wen ]
- Update to 4.02.3
PR: 203589
Submitted by: michipili@gmail.com(maintainer)
|
|
Fri, 2 Oct 2015
|
[ 06:40 antoine ]
Backout r398381, it fails to package
With hat: portmgr
MFH: 2015Q4
|
|
Thu, 1 Oct 2015
|
[ 19:24 mi ]
Upgrade from 4.02.1 to 4.02.3. Disable adding of explicit -O to compiler flags,
because that ends up lowering optimization for most people (from -O2).
Approved by: maintainer
(The upgrade is too minor to justify revision bumping of depending ports.)
|
|
Sun, 23 Aug 2015
|
[ 10:12 pi ]
lang/ocaml: pet portlint, change pkg-plist as suggested by ohauer
PR: 195736
Submitted by: ohauer
|
|
Sun, 31 May 2015
|
[ 17:49 marino ]
lang/ocaml: Remove softvfp option from ARMv6 build (no longer required)
PR: 200102
Submitted by: Mikael Urankar
Approved by: maintainer (assumed good, not able to test)
|
|
Fri, 29 May 2015
|
[ 13:58 marino ]
lang/ocaml: Set BROKEN on 2 new ARCHES
The MIPS platforms can't build ocaml. Set it and rework the BROKEN
for sparc64 while here.
PR: 197127
|
|
Thu, 14 May 2015
|
[ 10:15 mat ] (Only the first 10 of 1814 ports in this commit are shown above. )
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 13 May 2015
|
[ 17:38 marino ]
lang/ocaml: Tweak PROFILE handling to support DragonFly
This changes a conditional statement to an equivalent variation. An
internal transformation of DPorts was getting confused by this construct.
Discussed with: Michael Gruenewald (maintainer)
|
|
Wed, 29 Apr 2015
|
[ 20:45 marino ] (Only the first 10 of 21 ports in this commit are shown above. )
lang/ocaml: Upgrade version 4.01 => 4.02
PR: 195736
Submitted by: Michael Gruenewald (maintainer)
Add'l fixes: marino
Besides typical port cleanup, the dragonfly patches which had been
removed for the update were added back to the configure patch.
|
|
Sat, 25 Apr 2015
|
[ 05:51 amdmi3 ]
- Add CPE info
Approved by: portmgr blanket
|
|
Wed, 25 Mar 2015
|
[ 12:58 marino ] (Only the first 10 of 26 ports in this commit are shown above. )
lang category: Remove $PTHREAD_LIBS
Note: ecl did not pass check-plist (pre-existing), PR 198897 submitted.
approved by: PTHREAD blanket
|
|
Mon, 20 Oct 2014
|
[ 11:32 marino ]
lang/ocaml: Remove special NO_PROFILE handling for DragonFly
|
|
Fri, 22 Aug 2014
|
[ 07:20 antoine ] (Only the first 10 of 29 ports in this commit are shown above. )
Canonicalize a few LICENSE_PERMS
With hat: portmgr
|
|
Tue, 19 Aug 2014
|
[ 13:55 marino ]
lang/ocaml: Improve jobcontrol in ocamlbuild
Apply patch for upstream issue 0005371. It improves job control in
ocamlbuild and fixes some faulty sigpipe affecting ports build with
ocamlbuild.
PR: 189710
Submitted by: edwin (skylable.com)
patch by: glondu
Approved by: maintainer (Michael Gruenewald)
|
|
Sat, 2 Aug 2014
|
[ 11:57 danfe ]
Unbreak the build and packaging on PowerPC.
|
|
Tue, 15 Jul 2014
|
[ 17:52 adamw ] (Only the first 10 of 13 ports in this commit are shown above. )
Add EXAMPLES to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MEXAMPLES.
|
|
Tue, 8 Jul 2014
|
[ 13:11 marino ]
lang/ocaml: Add ARMv6 support
Redports confirms that changes do not break i386 and amd64 builds (8x).
PR: 189063
Submitted by: maintainer (Michael Gruenewald)
Patch by: Andy Ray
|
|
Tue, 10 Jun 2014
|
[ 23:40 marino ]
lang/ocaml: Remove DEF_OPT option (non-default option)
The option reacts poorly with ocamlp4, and phasing out DEF_OPT
completely will prevent a lot of breakage with ports that also
interact with ocamlp4.
PR: 189176
Submitted by: Anil Madhavapeddy
Prepared by: maintainer (Michael Gruenewald)
|
|
Fri, 6 Jun 2014
|
[ 14:37 bapt ]
Fix license perms to allow package distribution
Reported by: theraven
|
|
Tue, 13 May 2014
|
[ 07:25 makc ]
math/facile:
- bump PORTREVISION to trigger repackaging after recent ocaml update:
the package is usable only with ocaml which was used to compile facile.
lang/ocaml:
- add upgrading notes for committers
|
|
Wed, 7 May 2014
|
[ 08:27 marino ]
lang/ocaml: Fix NO_PROFILE setting and native compiler for DragonFly
The ocaml port was not respecting a NO_PROFILE definition in make.conf,
which causes a stage check failure (missing files) if it is set. Improve
that logic and patch the configure script in numerous places to support
building the native code compiler on DragonFly. This is one of those
famous ports that think all BSDs have the pattern "bsd" in their target
triplet.
Continued under PR: ports/188158
|
|
Sat, 26 Apr 2014
|
[ 21:39 marino ]
lang/ocaml: Fix plist issues
These missing man page issues were seen on Redports and reported, then
disappeared after the final patch. Unfortunately they weren't actually
addresses, so it's a mystery why Redports didn't continue to catch the
problem, nor the extra ocamldoc/custom directory (which is why the
ocamldoc/custom/.keep file original existed).
Add the 15 missing man pages to the plist and remove the empty directory
in the post-install target. Strangely enough, Redports still shows an
8x pass. I'm losing a lot of confidence in Redports results...
While here, remove the muting from the post-install target. This is
against convention.
PR: ports/188158
|
[ 17:20 marino ] (Only the first 10 of 16 ports in this commit are shown above. )
lang/ocaml: Upgrade version 4.00.1 to 4.01.0 and stage
This is a significant update from the maintainer. Not only has stage
support been added (and verified with an 8x pass on RedPorts), but
installed binaries are no longer stripped which was the cause of the
coccinelle malfunction seen on DragonFly.
Licensing was also defined, and the X11 build failure caused by the
use of the -R linker flag without the -Wl prefix has also been
rectified. [2]
PR: ports/188158 [1]
Submitted by: maintainer (Michael Gruenewald)
PR: ports/188330 [2]
Submitted by: madpilot
Approved by: maintainer
|
|
Sat, 29 Mar 2014
|
[ 17:35 marino ]
lang/ocaml: Restore CMP_LIB option in the definitions
noticed by: sunpoet
|
|
Wed, 26 Mar 2014
|
[ 21:58 marino ]
lang/ocaml: Make expunge executable
devel/ocaml-lwt needs to use it.
|
[ 17:50 marino ]
ocaml update 1/4: lang/ocaml upgrade from 3.12 to 4.00
There have been manual outstanding PRs on OCAML that have dragged on
for well more than a year. In the meantime, FreeBSD has been painfully
stucking on version 3.12 of Ocaml. Meanwhile, DragonFly's dports have
been maintaining version 4.00.
With a "Just do it" attitude, the dports version of Ocaml has been brought
in. This doesn't have stage support, nor is the the latest version
available. The idea is just get a working base Ocaml 4.00 in ports and
then have the maintainer update the appropriate PRs.
As a consequence, updates to omake, ocaml-findlib, and ocaml-images is
also required and upcoming.
Urged by: portmgr (bapt)
Related PR: ports/173364
Related PR: ports/173453
|
|
Wed, 19 Feb 2014
|
[ 16:20 gahr ]
- Also, remove useless include
|
[ 16:15 gahr ]
- Convert to USES=tk
|
|
Fri, 20 Sep 2013
|
[ 19:53 bapt ] (Only the first 10 of 379 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
lang)
|
[ 12:54 bdrewery ] (Only the first 10 of 61 ports in this commit are shown above. )
SSP support has been added to ports with WITH_SSP for i386 and amd64
on FreeBSD 10, and amd64 on earlier versions.
SSP_UNSAFE is added to disable in a port if it fails to build, but
this should only be used in rare circumstances such as kernel modules.
Otherwise, the port may just be failing due to lack of respecting
LDFLAGS.
On FreeBSD 10, this uses an ldscript in /usr/lib/libc.so to pull in
libssp_nonshared.a to address issues linking on i386 [1].
On earlier FreeBSD versions the WITH_SSP knob will add -lssp_nonshared
to LDFLAGS on i386. This is not needed on amd64. However, several hundred
ports do not currently respect LDFLAGS, so this support is disabled currently
as it causes build failures if a dependency is looking for the stack_chk (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 4 Jun 2013
|
[ 15:13 bapt ]
Convert to new options framework
|
|
Wed, 6 Feb 2013
|
[ 15:42 gahr ] (Only the first 10 of 13 ports in this commit are shown above. )
- Get rid of USE_TCL_THREAD and USE_TK_THREAD usages
|
|
Thu, 23 Feb 2012
|
[ 01:10 bf ]
fix the packing list for WITH_CMP_LIB
|
[ 00:21 bf ]
respect CC [1]; fix Tcl/Tk dependencies; don't conflate -nox11 and
-notk; add a test target; clean up
PR: 160492 [1]
Submitted by: J. Beich (partial patch; under various pseudonyms?) [1]
Approved by: maintainer
|
|
Thu, 29 Dec 2011
|
[ 20:33 scheidell ]
- Install expunge script with right permissions [1]
- needed to take the MAN()!= out because it causes multiple background shells
and can hurt INDEX performance [2]
PR: ports/163275 [1]
Approved by: gabor (mentor) [2]
|
|
Mon, 28 Nov 2011
|
[ 11:42 miwi ]
- Update to 3.12.1
- Pass maintainership to submitter
PR: 162576
Submitted by: michael.grunewald@laposte.net
Feature safe: yes
|
|
Sat, 5 Nov 2011
|
[ 03:40 tabthorpe ]
Reassign stas' ports back to the pool at his request, thanks for your years
of service, we hope to see you back.
|
|
Tue, 25 Oct 2011
|
[ 08:14 dougb ]
Fix plist when the THREADS option is off. Also convert to @dirrmtry
in a couple places that are affected by graphics/ocaml-lablgl and/or
x11-toolkits/ocaml-lablgtk2.
No PORTREVISION bump since THREADS is on by default.
Approved by: maintainer (implicit)
|
|
Mon, 4 Apr 2011
|
[ 02:29 stas ]
- Re-enable native dynamic linking on FreeBSD.
- Bump port revision.
PR: ports/156159
Submitted by: Johan van Selst <johans@stack.nl>
Pointy hat to: me
|
|
Thu, 31 Mar 2011
|
[ 07:39 stas ]
- Forced commit to describe the major changes in this version:
* Polymorphic recursion is supported, using explicit type
declarations on the recursively-defined identifiers.
* First-class modules: module expressions can be embedded
as values of the core language, then manipulated like
any other first-class value, then projected back to the module level.
* New operator to modify a signature a posteriori: S with
type t := tau denotes signature S where the t type component
is removed and substituted by the type tau elsewhere.
* New notations for record expressions and record patterns:
{ lbl } as shorthand for { lbl = lbl }, and { ...; _ } marks
record patterns where some labels were intentionally omitted.
* Local open let open ... in ... now supported by popular demand.
* Type variables can be bound as type parameters to functions;
such types are treated like abstract types within the function
body, and like type variables (possibly generalized) outside.
* The module type of construct enables to recover the module type
of a given module.
* Explicit method override using the method! keyword, with associated
warnings and errors.
|
[ 07:36 stas ]
- Update to 3.12.0.
PR: ports/155155
Submitted by: wen heping <wenheping@gmail.com>, Jaap Boender
<jaapb@kerguelen.org>
|
|
Mon, 22 Mar 2010
|
[ 09:37 stas ]
- Fix build on powerpc.
|
|
Tue, 9 Mar 2010
|
[ 22:45 stas ]
- Update to 3.11.2.
PR: ports/144004
Submitted by: soulcatcher <soulcatcher13@gmail.com>
|
|
Wed, 11 Nov 2009
|
[ 16:13 marcel ]
ocaml builds on ia64.
Approved by: stas
|
|
Mon, 29 Jun 2009
|
[ 10:46 stas ]
- Update to 3.11.1.
|
|
Thu, 21 May 2009
|
[ 11:55 pav ]
- Mark MAKE_JOBS_UNSAFE
Submitted by: David Naylor <naylor.b.david@gmail.com>
|
|
Sat, 9 May 2009
|
[ 19:54 stas ]
- Fix a couple of serious bugs in threading code (#4666 and #4678).
Obtained from: ocaml cvs
|
|
Sat, 11 Apr 2009
|
[ 13:23 stas ] (Only the first 10 of 23 ports in this commit are shown above. )
- Update lang/ocaml to 3.11.0. [1]
- Fix devel/cil build with 3.11.0 by using proper object file name
- Fix devel/deputy build with 3.11.0 by using proper object file name
- Fix lang/mtasc. Ocamlp4 syntax has changed and usage of ';' as delimiters
is not allowed now.
- Fix usage message in lang/mtasc.
- Implement a FreeBSD specific code for retriving the executable path in
lang/mtasc.
- Update devel/omake to 0.9.8.5.
- Fix devel/omake compilation with 3.11 by dropping an unused reference from the
code.
- Fix www/geneweb build with 3.11 by not emitting errors for warnings.
- Fix print/advi build. [2]
- Update lang/cduce to 0.5.3 (this fixes build with ocaml 3.11.0).
PR: ports/130845 [1] [2] (based on)
Submitted by: Hirohisa Yamaguchi <umq@ueo.co.jp> [1],
Tsurutani Naoki <turutani@scphys.kyoto-u.ac.jp> [2]
|
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
|
Sun, 6 Apr 2008
|
[ 19:44 stas ]
- Update to 3.10.2.
Thanks to: Thomas Crimi <tcrimi@procida.us>
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Sat, 24 Mar 2007
|
[ 14:03 pav ] (Only the first 10 of 26 ports in this commit are shown above. )
- COPYTREE_* are now part of bsd.port.mk
PR: ports/100996
Submitted by: stass
|
|
Sat, 23 Sep 2006
|
[ 17:37 stas ]
- Update to 3.09.3
ChangeLog:
- Mainly bugfix release
Approved by: sem (mentor)
|
|
Wed, 20 Sep 2006
|
[ 10:44 stas ]
Change my maintainer address to FreeBSD one.
Approved by: sem (mentor)
|
|
Sat, 19 Aug 2006
|
[ 09:38 itetcu ]
Don't depend on X11 when WITHOUT_X11 was defined, even if X11 exists on
target machine.
PR: ports/102261
Submitted by: Stanislav Sedov (maintainer)
Requested by: John E Hein <jhein@timing.com>
|
|
Wed, 2 Aug 2006
|
[ 14:00 itetcu ] (Only the first 10 of 14 ports in this commit are shown above. )
- Add support for threaded Tk by passing PTHREAD_LIBS to configure in -tklibs
swith. This allows build with threaded Tk (otherwise configure fails to use
Tk). Also depend on threaded Tk by default in case of THREADS support - with
non-pthread tk library it will not be stable enough
- Add OPTIONS
- Enable builds of non-threaded targets
- Depend on X in case if X is installed, since configure does this by default.
- Rename patchfiles to make portlint happy
- Eliminate the number of reinplace patterns (remove duplicates, optimize)
- Move manpage list in the separate files
- Pass pthread flags to compiler (PTHREAD_CFLAGS/LIBS safety)
- Remove some ugly hacks on setting permissions etc (eliminated by setting
correct permission in COPY_TREE macros)
- Eliminate duplicate entries in PLIST in case of unstalling optimized binaries,
also optimize this part (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 14 Jun 2006
|
[ 21:46 sat ]
- Update to 3.09.2
- Add MASTER_SITE_GENTOO
- Unqoute a BROKEN
PR: ports/97555
Submitted by: sat
Tested by: Joseph Koshy <jkoshy@freebsd.org>, Denis Shaposhnikov
<dsh@vlink.ru>,
Holger Lamm <holger@e-gitt.net>, Hubert Tournier
<hubert.tournier@online.fr>,
Dan Pelleg <daniel+unison@pelleg.org> (many thanks are due)
|
[ 21:38 linimon ] (Only the first 10 of 13 ports in this commit are shown above. )
Reset marwan.burelle@lri.fr due to 6 months of inactivity, no response to
email, and various maintainer-timeouts.
Hat: portmgr
|
|
Tue, 9 May 2006
|
[ 20:52 edwin ] (Only the first 10 of 72 ports in this commit are shown above. )
Remove USE_REINPLACE from the categories starting with L
|
|
Thu, 1 Dec 2005
|
[ 15:46 garga ]
- Update to 3.09.0
PR: ports/89780
Submitted by: maintainer
|
Number of commits found: 135 (showing only 100 on this page) |
As an Amazon Associate I earn from qualifying purchases.