lang/ecl: Move man pages to share/man

Approved by:	portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

lang: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@tobez.org>

devel/libffi: Bump deps PORTREVISION for shlib change

PR:		263764
Reported by:	VVD <vvd@unislabs.com>

lang/ecl: upgrade to 21.2.1

Changelog at

  https://gitlab.com/embeddable-common-lisp/ecl/-/blob/develop/CHANGELOG

PR:		257460
Reported by:	thierry

lang/ecl: compiler requires libatomic_ops in RUN_DEPENDS.

PR:		255935
Reported by:	Kevin Zheng <kevinz5000@gmail.com>

lang/ecl: apply portfmt and portclippy.

Remove # $FreeBSD$ from Makefiles.

These ports now build on aarch64.

Approved by:	portmgr (tier-2 blanket)
Obtained from:	lonesome.com TRYBROKEN run

Remove references to non existent patches.

PR:		250723

lang/ecl: fix build on GCC architectures

Use C99 mode:
/wrkdirs/usr/ports/lang/ecl/work/ecl-20.4.24/src/c/cfun_dispatch.d:1022: error:
'for' loop initial declaration used outside C99 mode

Chanse update of devel/libffi

Chase the devel/libffi update
Bump portrevision of all dependent ports to chace shard library version bump
in libffi.
Update LIB_DEPENDS lines where needed to not require a specific version of
libffi.so.

PR:		247028 (for tracking)

lang/ecl: Update to 20.4.24

Update lang/ecl to 20.4.24.

PR:		247283
Reviewed by:	thierry
Approved by:	olgeni (maintainer)

lang/ecl: Fix r538595

Move the comment introduced in r538595 so that it does not break the port
anymore.

Reported by:	mat
Reviewed by:	mat
Approved by:	tcberner (co-mentor)
Differential Revision:	https://reviews.freebsd.org/D25244

lang/ecl: Fix missing reference to SageMath

Add a reference to SageMath that was forgotten for a patch added with
revision 537602.

Reviewed by:	thierry
Approved by:	olgeni (maintainer), gerald (mentor)
Differential Revision:	https://reviews.freebsd.org/D25180

lang/ecl: Add SAGE option

Introduce a new option called SAGE and enabled by default in order to have
ecl working with sage.

Also:

- Move bohem-gc dependency from THREADS_LIB_DEPENDS_OFF to LIB_DEPENDS.
- Build with libatomic_ops from ports rather than with the bundled library.
- Replace explicit settings of CFLAGS and LDFLAGS by USES=localbase.
- Add USES+= autoreconf.

This work is based on https://reviews.freebsd.org/D24958 submitted by
thierry.

Submitted by:	thierry (based on)
Reviewed by:	thierry (original submitter)
Approved by:	olgeni (maintainer), gerald (mentor)
Differential Revision:	https://reviews.freebsd.org/D25096

lang/ecl: add link to lib directory without version number (lib/ecl).

This is required by the work being done on math/sage.

Submitted by:	thierry

Update lang/ecl from 15.3.7 to 16.1.3

- Change MASTER_SITES, as 16.1.3 is not available on SourceForge.
- Rename the CLX option to X11, consistent with FreeBSD's standards and
  with the fact that the option into the configure script from ecl is now
  --with-x.
- Strip libecl.so.${PORTVERSION}.

PR:		232615
Approved by:	olgeni (maintainer timeout, 16 months), gerald (mentor)

Sprinkle more USES=xorg

These ports now build on powerpc64.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

devel/boehm-gc: update to 7.6.8

ChangeLog: https://github.com/ivmai/bdwgc/releases/tag/v7.6.8

* Giving maintainership to yasu@utahime.org
* Bumping PORTREVISION for dependent ports

PR:	230577
Submitted by:	yasu@utahime.org
Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D16704

Mark ports broken on mips64 that are already broken on powerpc64.  In
most cases, the failure mode is the same.  Also, mark them broken on
mips when necessary.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

Bump PORTREVISION due upgrade of devel/boehm-gc to 7.6.6

PR:		228597
Approved by:	portmgr (antoine)

Bump PORTREVISION due upgrade of devel/boehm-gc to 7.6.4

PR:		225560
Submitted by:	Yasuhiro KIMURA <yasu@utahime@org>
Reviewed by:	cpm
Approved by:	portmgr (antoine)

Bump PORTREVISION due upgrade of devel/boehm-gc to 7.6.2

Approved by:	portmgr (antoine)

Provide more descriptive error messages for ports failing on powerpc64.

Approved by:	portmgr (tier-2 blanket)

Update WWW: SF redirects to https://sourceforge.net/projects/<PROJECT_NAME>/

Mark as broken on various tier-2 archs.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

Now builds on sparc64.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

many ports: mark broken on powerpc64

Remove ${PORTSDIR}/ from dependencies, categories h, i, j, k, and l.

With hat:	portmgr
Sponsored by:	Absolight

- Switch to options helpers
- Add missing files to plist (THREADS option)

PR:		203051
Submitted by:	amdmi3

Upgrade to version 15.3.7 and add LICENSE.

Fix pkg-plist for THREADS option; use OPTIONS_SUB.

PR:		198897
Submitted by:	marino

lang category: Remove $PTHREAD_LIBS

Note: ecl did not pass check-plist (pre-existing), PR 198897 submitted.

approved by:	PTHREAD blanket

Upgrade to version 15.2.21 and unbreak.

Cleanup plist

Mark broken: Fails to link with new libgc

	cc -L/usr/local/lib -pthread -Wl,--rpath,/usr/local/lib -L/usr/local/lib -o
ecl_min cinit.o c/all_symbols.o -L./ libeclmin.a -leclatomic  -lgmp
-lgc-threaded -lffi -pthread   -lm ;\
fi
libeclmin.a(cosh.o): In function `ecl_cosh_long_float':
numbers/cosh.o.c:(.text+0x151): warning: coshl has lower than advertised
precision
libeclmin.a(sinh.o): In function `ecl_sinh_long_float':
numbers/sinh.o.c:(.text+0x151): warning: sinhl has lower than advertised
precision
libeclmin.a(tanh.o): In function `ecl_tanh_long_float':
numbers/tanh.o.c:(.text+0x151): warning: tanhl has lower than advertised
precision
libeclmin.a(alloc_2.o): In function `init_alloc':
alloc_2.o.c:(.text+0x614): undefined reference to `GC_start_call_back'
libeclmin.a(alloc_2.o): In function `si_gc_stats':
alloc_2.o.c:(.text+0xcfb): undefined reference to `GC_print_stats'
alloc_2.o.c:(.text+0xdf6): undefined reference to `GC_print_stats'
alloc_2.o.c:(.text+0xe30): undefined reference to `GC_print_stats'

Reported by:	pkg-fallout

Convert a bunch of EXTRACT_SUFX=... into USES=tar:...

Approved by:	portmgr (not really, but touches unstaged ports)

Fix some non default LIB_DEPENDS

With hat:	portmgr

Modernize LIB_DEPENDS

With hat:	portmgr

- Stage support

Add NO_STAGE all over the place in preparation for the staging support (cat:
lang)

Convert to new perl framework
Convert from USE_GMAKE to USES=gmake

Mark jobs unsafe and convert to USES=gmake

Upgrde to version 13.5.1.

Convert Makefile headers to the new format.

Replace spaces with tabs in assignments.

- Upgrade to version 12.7.1 [0].
- Convert to OptionsNG while I'm here.

Submitted by:	Krishna <v.krishnakumar@gmail.com> (by email) [0]

Upgrade to version 12.2.1.

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- remove MD5

Add missing @dirrm entries.

Noticed by:     QAT

Upgrade to version 10.4.1.

Clean up my pkg-descr files (spelling and whitespace).

Convert LDCONFIG_DIRS to USE_LDCONFIG.

PR:             based on ports/146365
Submitted by:   Alex Kozlov <spam at rm-rf.kiev.ua>
Approved by:    maintainers timeout (two weeks)

Switch to use newer GMP version.

PR:             ports/144487
Submitted by:   ale
Approved by:    portmgr (-exp run by erwin)

Adopt unmaintained port.

- Switch SourceForge ports to the new File Release System: categories starting
with H,I,J,K,L

Chase libgmp and bump PORTREVISION.

- Update to 0.9l

PR:             ports/126920
Submitted by:   fulvio ciriaco <oivulf@gmail.com>

Reset maintainer at his request.

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

BROKEN on ia64 and sparc64: Does not compile

- Add OPTIONS.
- Avoid installing the GNU license.
- Fix building on !i386.

PR:             99439
Approved by:    maintainer

Chase gmp library and bump PORTREVISION.

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

SHA256ify

Approved by: krion@

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Populate virtual category "lisp"

PR:             ports/86370
Submitted by:   Julian Stecklina
Approved by:    portmgr (linimon)

Update to 0.9g
Highlights: a port of the ASDF system definition, and a port of SBCL's socket
libraries

PR:             ports/84873
Submitted by:   maintainer

- Update to 0.9e

PR:             ports/78034
Submitted by:   Julian Stecklina <der_julian@web.de> (maintainer)

Add missing perl dependency.

Reported by:    pointyhat

Add missing dependency and fix build.

PR:             ports/74345
Submitted by:   maintainer

Update to 0.9d.041103

PR:             ports/73435
Submitted by:   maintainer

- Mark only for i386, does not build on 64-bit archs

PR:             ports/73217
Submitted by:   Julian Stecklina <der_julian@web.de> (maintainer)

- Update to 0.9d-041019

PR:             ports/72851
Submitted by:   Julian Stecklina <der_julian@web.de> (maintainer)

upgrade to 040726

PR:             69597
Submitted by:   maintainer

Add ecl 0.9d.040206, an ANSI Common Lisp implementation.

PR:             ports/62455
Submitted by:   Julian Stecklina