21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

korean: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Hye-Shik Chang
  *  Hye-Shik Chang <perky@FreeBSD.org>
  *  Hyogeol Lee <hyogeollee@gmail.com>
  *  Hyogeol, Lee <hyogeollee@gmail.com>
  *  Jie Gao <gaoj@cpsc.ucalgary.ca>
  *  Junho CHOI <junho.choi@gmail.com>
  *  Ka Ho Ng <khng300@gmail.com>
  *  Oh Junseon <hollywar@mail.holywar.net>
  *  Satoshi TAOKA <taoka@FreeBSD.org>

With hat:	portmgr

    2d165cf

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

08:36 mat 

OPTIONS_SUB only cares about being defined, its content is ignored.

Sponsored by:	Absolight

 

14:08 mat 

Remove ${PORTSDIR}/ from dependencies, categories h, i, j, k, and l.

With hat:	portmgr
Sponsored by:	Absolight

 

15:03 tijl 

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same
Makefile.am and clean up the port Makefile.

japanese/scim-honoka: Tries to hide all symbols that start with an
underscore, but because this library is written in C++ all symbols start
with _Z so it ends up hiding everything.  Just don't hide anything at all
like the textproc/scim configure script does.

multimedia/schroedinger: Apply an upstream patch.

textproc/scim-input-pad: Same as japanese/scim-honoka.

PR:		201922
Approved by:	portmgr (antoine)
Exp-run by:	antoine

 

13:19 tijl 

textproc/scim:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip

 

17:32 amdmi3 

- Switch to USES=libtool

Approved by:	portmgr blanket

 

01:38 jkim 

Stagefy, convert to USES=gmake, and convert LIB_DEPENDS to new format.

 

19:49 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
korean)

 

23:04 jkim 

Update e-mail address on behalf of cjh as he personally requested.

 

10:44 ak 

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

 

14:20 bapt 

Finish converting the whole ports tree to USES=pkgconfig

 

22:46 jkim 

- Update to 0.4.0.
- Fix dependencies and tweak pkg-message.
- Trim makefile header, add license, and convert to optionsNG.

Feature safe:	yes

 

05:26 dinoex 

- update png to 1.5.10

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

19:57 jkim 

Make portlint happy.

19:49 jkim 

Update to 0.3.2 and grab maintainership.

02:01 ade 

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

18:14 linimon 

Reset cjh due to inactivity.  We hope to see him back again soon.

Hat:            portmgr

00:24 amdmi3 

- Switch SourceForge ports to the new File Release System: categories starting
with H,I,J,K,L

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

13:39 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

13:44 pav 

- Chase libhangul update

10:12 cjh 

Update to 0.3.1. It depends ko-libhangul now.

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

09:17 ume 

Fix plist after upgrading scim to 1.4.5.
scim-1.4.5 appended its version to the moduledir in scim.pc.

Approved by:    cjh (maintainer)

19:22 pav 

- Fix after objformat removal

Reported by:    pointyhat

08:54 marcus 

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

07:50 cjh 

temporarily, I mark it BROKEN in 4.x.
(maybe compiler problem)

Approved by:    kris

15:35 ade 

Fix devel/libytnef[1] and others[2] after libtool commit.

Submitted by:   pointyhat[1] ume[2]
Approved by:    portmgr (implicit)

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

02:09 cjh 

Update to 0.2.1.

PR:             ports/90089
Submitted by:   Byung-Hee HWANG <bh@izb.knu.ac.kr>

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

05:22 marcus 

Bump PORTREVISION to chase the glib20 shared library update.

13:21 nork 

SCIM updated to 1.4.2.
o Update scim 1.4.2. [1]
o Update skim 1.4.2. [1]
o Update scim-uim 0.1.4. [2]
o Bump PORTREVISION in scim related ports.

Approved by:    Jie Gao <gaoj@cpsc.ucalgary.ca> [1]
Approved by:    Seiya Yanagita <s_yanagita@ybb.ne.jp> [2]

05:56 cjh 

activate scim-hangul, Korean imengine for scim.

Inspired by: Byung-Hee HWANG <bh@izb.knu.ac.kr>, nork@